Manual do usuário Addonics Technologies DCMR256SC

Resumo do conteúdo contido na página número 1

Enclosure and Drive Cradle Overview



The drive enclosure is the enclosure where a SATA hard drive is mounted and

secured by 4 screws.



Drive cradle, also known as fixed tray, is the frame that mounts inside the drive

bay of a desktop, server or any computing equipment. The drive cradle provides
both power and data connection between the computer and the drive enclosure.

The Diamond cipher drive cradle fits into any standard 5 ¼” drive bay and can
Addonics
connect to th

Resumo do conteúdo contido na página número 2

Diamond Cipher key The same holds true if a hard drive already has data on it is installed into the Diamond Cipher drive enclosure. The computer detects the hard drive as a brand Check to make sure you have the correct version of the Diamond Cipher key. new drive or a drive that is unallocated. Once you proceed to partition the drive, the data that was on the hard drive will be erased and cannot be recovered. The key should match the label at the back A Diamond Cipher encrypted hard d

Resumo do conteúdo contido na página número 3

Step 4 Cable Connections Turn the Diamond enclosure over with Model: DCMR256I the hard drive mounting holes facing up. Use the included flat head screws to secure the hard drive onto the Power: Using the 4-pin floppy connector of the Y-cable, connect it to the floppy- bottom of the enclosure and turn in type power connector on the converter. To provide power for the y-cable, the screw to the “LOCK” position. connect it to one of your desktop's 4-pin molex cable. Data: Connect the

Resumo do conteúdo contido na página número 4

Model: DCMR256SC Technical Support Power: Using the 4-pin floppy connector of the Y-cable, connect it to the floppy- If you need assistance to get your unit functioning properly, please call Addonics type power connector on the converter. To provide power for the y-cable, Technical Support. Our technical staff will be happy to assist you, but they will connect it to one of your desktop's 4-pin molex cable. need your help to do so. Calling the technical support staff without all the prope