Manual do usuário NETGEAR ReadyNAS 600B

Resumo do conteúdo contido na página número 1

READYNAS
Disk Installation Guide
version B
600
Important instruction on how to install hard disks in your ReadyNAS
☼☼ Prepare for Installation
Read this Guide before you install the disks.
Prepare the follows for the disk installation:
ReadyNAS 600 disk-less system
Disk drive brackets and screw in accessory box
Ethernet cable and power cable
Hard disk drives (not included)
Screw driver (not included)
1 Remove the top cover to access disk cage



Remove the 3 screws in back.
ReadyNAS 600 ca

Resumo do conteúdo contido na página número 2

3 Install the hard disks into cage 1 2 3 4 ☼ Hard disks with mounting bracket installed System case with easy access disk cage 1 2 3 4 2) Push the drives into SATA connector completely, 1) Install the disks into the cage. and secure the drives with screws. 4 Re-install top cover and front panel Done with disk installation. Re-install top cover and screw on in the back. Refer to the Getting Started Guide for further instruction. © 2005 Infrant Technologies, Inc. All rights reserved. Infrant Tec