Resumo do conteúdo contido na página número 1
User’s Manual
Resumo do conteúdo contido na página número 2
Resumo do conteúdo contido na página número 3
FCC COMPLIANCE STATEMENTS This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
Resumo do conteúdo contido na página número 4
TRADEMARKS MS-DOS, Windows, Windows 95/98/Me/2000/XP are trademarks of Microsoft Corporation. Macintosh is trademark of Apple Computer Inc. *All of the third-party brands and names are the property of their respective owners.
Resumo do conteúdo contido na página número 5
CONTENTS INTRODUCTION ........................................................................................................... 1 SYSTEM REQUIREMENTS .......................................................................................... 1 PART NAMES AND FUNCTIONS................................................................................ 2 FRONT PANEL OF THE DRIVE ............................................................................ 2 REAR PANEL OF THE DRIVE .........
Resumo do conteúdo contido na página número 6
Resumo do conteúdo contido na página número 7
INTRODUCTION The External DVD-ROM has the following features: ♦ It can attach with the IEEE 1394 (FireWire) interface, the specification of the interface must meet: IEEE 1394 (Data Transfer Rate = up to 400Mbits/sec) standard. ♦ This drive can read all types of CD and DVD media including CD, CD-R, CD-RW and DVD disc. ♦ When working with DVD playing software, this drive can playback DVD title smooth mostly. ♦ The external DVD-ROM can be easily connected to computer via IEEE 1394 inter
Resumo do conteúdo contido na página número 8
PART NAMES AND FUNCTIONS Your external DVD-ROM may differ slightly from the figures shown, however the controls will operate as described below. Front Panel Of The Drive 1. Disc Ready/Read LED: This LED is used to indicate the disc access status. 2. Eject Button: Press this button to open the disc tray. To close the disc tray, gently push the front of the tray. 3. Emergency Eject: In case you cannot supply power to the drive but want to remove a disc from the tray, push a smal
Resumo do conteúdo contido na página número 9
Rear Panel Of The Drive 1. Power Jack (DC IN): Connect the AC adapter lead here. 2. Power Source Switch: DC: Means this DVD-ROM is powered by the AC adapter. Switch to this position always. PC: Not working with the IEEE 1394 interface. 3. Interface Connector: Connect the IEEE 1394 interface cable here. 4. Power Button: Press this button to manually power on/off the drive. - 3 -
Resumo do conteúdo contido na página número 10
HARDWARE INSTALLATION Check What Interface Cable You Are Using There are two types of the IEEE 1394 interface cable. The following figures describe the difference of these two types of cable. Standard IEEE 1394 cable IEEE 1394 cable with Daisy-chain connector - 4 -
Resumo do conteúdo contido na página número 11
Cable Connections 1. Insert the plug of the IEEE 1394 cable into the Interface Connector of IDE drive. Press firmly until the interface connector is seated correctly. 2. Make sure the Power Source Switch is at the DC position. 3. Connect the AC adapter lead to the Power Jack (DC IN) at the rear panel of the drive. Attach the AC adapter to the AC power outlet. 4. Please follow the related software installation guide to install the device driver. Switch to DC position Push Push
Resumo do conteúdo contido na página número 12
SOFTWARE INSTALLATION FOR WINDOWS 98SE NOTE: The IEEE1394 interface only works under Win98 Second Edition or above version. 1. Boot-up your computer into Windows 98SE, making sure the ‘IEEE 1394 Host Controller’ device driver has been installed and is available. To check this, right-click ‘My Computer’, click ‘Properties’ and then ‘Device Manager’ to open the ‘Device Manager’ window. Refer to the figure shown alongside to see if the IEEE 1394 Host Controller is installed without
Resumo do conteúdo contido na página número 13
6. Ensure the IEEE 1394 interface cable and then the AC adapter connections are made as described in Hardware Installation. Insert the port connector of the IEEE 1394 cable into the IEEE 1394 port of your computer. 7. Windows 98SE will install its resident device driver automatically. After the installation, you will find a new drive letter has been assigned for the drive in ‘My Computer’. 8. If the external DVD-ROM doesn’t appear in ‘My Computer’ or doesn’t work properly, please
Resumo do conteúdo contido na página número 14
SOFTWARE INSTALLATION FOR WINDOWS Me 1. Boot-up your computer into Windows Me, making sure the ‘IEEE 1394 Host Controller’ device driver has been installed and is available. To check this, right-click ‘My Computer’, click ‘Properties’ and then ‘Device Manager’ to open the ‘Device Manager’ window. Refer to the figure shown alongside to see if the IEEE 1394 Host Controller is installed without error. 2. Ensure the IEEE 1394 interface cable and then the AC adapter connections are
Resumo do conteúdo contido na página número 15
4. If the external DVD-ROM doesn’t appear in ‘My Computer’ or doesn’t work properly, please go into ‘Device Manager’ to check whether the devices are installed as the table and figure. Installed Device Drivers Location IEEE 1394 CD-ROM Installed under ‘Storage Device’. SBP2 Compliant IEEE 1394 Device Installed under ‘SBP2’. Installed under ‘CDROM’ (the name list in the figure The real name of the DVD-ROM drive may differ from your DVD-ROM drive). - 9 -
Resumo do conteúdo contido na página número 16
SOFTWARE INSTALLATION FOR WINDOWS 2000 1. Boot-up your computer into Windows 2000, making sure the ‘IEEE 1394 Host Controller’ device driver has been installed and is available. To check this, right-click ‘My Computer’, click ‘Properties’ then ‘Hardware’ and then ‘Device Manager’ to open the ‘Device Manager’ window. Refer to the figure shown alongside to see if the IEEE 1394 Host Controller is installed without error. 2. Ensure the IEEE 1394 interface cable and then the AC adapt
Resumo do conteúdo contido na página número 17
4. If the external DVD-ROM doesn’t appear in ‘My Computer’ or doesn’t work properly, please go into ‘Device Manager’ to check whether the devices are installed as the table and figure. Installed Device Drivers Location IEEE 1394 / Firewire IDE device IEEE 1394 Installed under ‘DVD/CD-ROM drives’. SBP2 Device - 11 -
Resumo do conteúdo contido na página número 18
SOFTWARE INSTALLATION FOR WINDOWS XP 1. Boot-up your computer into Windows XP, making sure the ‘IEEE 1394 Host Controller’ device driver has been installed and is available. To check this, right-click ‘My Computer’, click ‘Properties’ then ‘Hardware’ and then ‘Device Manager’ to open the ‘Device Manager’ window. Refer to the figure shown alongside to see if the IEEE 1394 Host Controller is installed without error. 2. Ensure the IEEE 1394 interface cable and then the AC adapter
Resumo do conteúdo contido na página número 19
4. If the external DVD-ROM doesn’t appear in ‘My Computer’ or doesn’t work properly, please go into ‘Device Manager’ to check whether the devices are installed as the table and figure. Installed Device Drivers Location SBP2 Compliant IEEE 1394 device Installed under ‘SBP2 IEEE 1394 Devices’. IEEE 1394 / Firewire Mobile solution Installed under ‘DVD/CD-ROM drives’. IEEE 1394 SBP2 Device - 13 -
Resumo do conteúdo contido na página número 20
SOFTWARE INSTALLATION FOR MACINTOSH 1. Before install the IEEE 1394 DVD-ROM, please check the version of your FireWire driver in system, the version higher than 2.7 is recommended. Follow the below procedures to check the version. A. Double-click ‘Macintosh HD’ on desktop. B. Double-click ‘System Folder’ in the opened window. C. Double-click ‘Extensions’ folder. D. Click on ‘FireWire Support’ in the list. E. Click ‘File’ ! ‘Get Info’ ! ‘General Information’ to open the informa
