Resumo do conteúdo contido na página número 1
P1
®
Cod. 2850016 - Rev. 00 ENG - Ottobre 2008
Resumo do conteúdo contido na página número 2
TECHNICAL CHARACTERISTICS TROUBLESHOOTING GUIDE The machine is provided with a program of self-diagnosis, that allows to visualize on the display the messages of breakdown or machine stopped : Dimensions: Height 66.5 cm ERROR GROUP 1 the coffee-group has not reached the “supply position” given by its right Width 35 cm micro switch. Check Fuses, group right micro switch, group motor, Depth 41 cm electronic board.. ERROR GROUP 0 the coffee-group has not reached the
Resumo do conteúdo contido na página número 3
QUICK FUNCTIONS GRINDER To enter, keep pressed the button “espresso short” at the switching-on. The quantity of ground coffee is adjustable through a screw (2); screwing it the On display you will see “QUICK MENU ” quantity decreases, while unscrewing it, the quantity increases.. Pushing the relative button, you will execute these following functions: To adjust the degree of grinding, after having pushed the lock (6), act on the grind-stone holder (1), clockwise to have a finer grind
Resumo do conteúdo contido na página número 4
Movements nr 14 and 15 (Decounter 1 and 2) INSTALLATION Before installing the machine, read carefully this manual. The movements #14 (decounter 1) and #15 (decounter 2), where inserted, de- Install the machine in a dry and hygienic place. crease the relative decounter by a unit. To set the value of the decounter, it is enough to change it in one selection which contains it, automatically it will be modified also in all the other selections. ELECTRIC CONNECTION If the
Resumo do conteúdo contido na página número 5
It is possible to eliminate, to modify or to insert movements or to change its regu- HOW TO GET THE MACHINE READY lations where possible, for example the dosing of the products. • Open the door, fill the coffee bowl with coffee beans and close the door · to move the selection cursor movement use “up” and “down” • Connect the plug · to insert a new movement in the selected position press" +" • Keep pressed the “short espresso” button and switch on the machine with · to eliminate th
Resumo do conteúdo contido na página número 6
BUTTONS FUNCTIONS SET DRINKS Premise: every selection or drink it is composed from a sequence of movements During the programming, the buttons have the following functions: which correspond to a single operation of the machine. The single movements are only performed after the correct event of the previous movement, in case of not-correct operation the machine will go to alarm. SHORT ESPRESSO 1 5 THE CORRECT SEQUENCE OF COMPOSITION OF THE SELECTIONS IS ALREADY SET FROM THE MANUF
Resumo do conteúdo contido na página número 7
Electrical OUTPUT PROGRAMMING There are 2 levels of program: a frequent menu and a main menu. N° description The frequent menu is useful to the operator to regulate the dosing of the drinks, to set the prices, to notice the counters and to visualize the events of the machine. 0 Espresso electro-valve The main menu is useful to the technical sector of the management and it is for 1 Not used setting the various parameters of the machine. 2 Hot water electr
Resumo do conteúdo contido na página número 8
RESET COUNTERS&AMOUNTS: Reset of all the counters above. Press “6” SET DRINKS to confirm or “5” to cancel. ENABLE TEMPERAT.ON DISPLAY: Visualization on display of the boiler Entering the program through Enter, you will see the sequence of the existing temperature. drink codes. The flashing cursor points out the drink code selected, to move it use the keys + to SERIAL NUMBER: set the serial number of the machine. advance or - to withdraw; contemporarily to the movement of the cu
Resumo do conteúdo contido na página número 9
To modify the name of the drink use the keys: OPTIONS: LEVEL 2 (manager- technician) " -" to withdraw with the cursor on the character After having inserted the correct password, that it initially is" ask 00070", you " +" to advance with the cursor on the character will enter in the following menu: "back" or "forward" to modify the character MODIFY PASSWORD LEVEL 1: Insert the new password and press Enter to Example: change the water quantity of the coffee for the selection
Resumo do conteúdo contido na página número 10
To enter this menu, press “enter”, the display will show “PASSWORD LEVEL COUNTERS & AMOUNTS 1”. Now you can set 2 different password, one for the first level and one for the sec- In this menu it is possible to see the counters of the various selections and eventu- ond level. ally to reset them. Use the “back” or “forward” buttons to move the cursor, while press “+” or “-” to set the right code. After all, press “enter”. Press Enter to enter the menu that is composed in the following
Resumo do conteúdo contido na página número 11
SET TEMPERATURE EVENTS The followings programs compose this menu: In this menu it is possible to notice the last 100 events of the machine. Entering the menu with ENTER the following data will be visualized: SET BOILER TEMPERATURE Set-up of the boiler temperature. Id: XX RESULT P:n TIME OVERHEATING BOILER After this time of “machine stopped” the boiler is overheated. SET OVERHEATING BOILER ID indicates the kind of event, that can be a code drink or an intern
Resumo do conteúdo contido na página número 12
PAYMENT SYSTEM MAIN MENU This sub-menu is composed by the following parameters: To enter this menu, keep pressed the button “long espresso” at the switching on. SET COIN VALUE PARALLEL SYSTEM The display will show “payment system” which is the first of the following sub- Setting of the coin values (see note 1). menus: DECIMAL POINT PAYMENT SYSTEM Setting of the decimal point to be applied to coin and prices values. Setting of the system of payment and its options.
