Resumo do conteúdo contido na página número 1
OPERATION AND PARTS MANUAL
SERIES
MODEL MT-74FA
TAMPING RAMMER
(ROBIN GASOLINE ENGINE)
Revision #3 (11/08/07)
To find the latest revision of this
publication, visit our website at:
www.multiquip.com
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
Resumo do conteúdo contido na página número 2
MT-74FA — PROPOSITION 65 WARNING PAGE 2 — MT-74FA — OPERATION AND PARTS MANUAL — REV. #3 (11/08/07)
Resumo do conteúdo contido na página número 3
NOTE PAGE MT-74FA — OPERATION AND PARTS MANUAL — REV. #3 (11/08/07) — PAGE 3
Resumo do conteúdo contido na página número 4
MT-74FA — TABLE OF CONTENTS Multiquip Tamping Rammer ROBIN EH-12-2D46420 MT-74FA ENGINE Proposition 65 Warning ......................................... 2 Crankcase and Cylinder Assembly ................34-35 Table Of Contents ................................................. 4 Crankshaft and Piston Assembly ...................36-37 Parts Ordering Procedures ................................... 5 Muffler, Air Cleaner, Camshaft,& Carb. Assy. .38-39 Safety Message Alert Symbols ...................
Resumo do conteúdo contido na página número 5
Ordering parts has never been easier! Choose from three easy options: Effective: st January 1 , 2006 Best Deal! Order via Internet (Dealers Only): If you have an MQ Account, to obtain a Order parts on-line using Multiquip’s SmartEquip website! Username and Password, E-mail us at: parts@multiquip.com. ■ View Parts Diagrams To obtain an MQ Account, contact your ■ Order Parts District Sales Manager for more information. ■ Print Specification Information Use the internet and qualify for a 5% Discoun
Resumo do conteúdo contido na página número 6
MT-74FA — SAFETY MESSAGE ALERT SYMBOLS HAZARD SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Potential hazards associated with the operation of a Safety precautions should be followed at all times when operating this MT -74FA Tamping Rammer will be referenced with Hazard equipment. Failure to read and Symbols which appear throughout this manual, and will be Lethal Exhaust Gases understand the Safety Messages and referenced in conjunction with Safety Message Alert Operating Instructions cou
Resumo do conteúdo contido na página número 7
MT-74FA — SAFETY MESSAGE ALERT SYMBOLS Equipment Damage Rotating Parts Hazards CAUTION CAUTION CAUTION CAUTION CAUTION CAUTION CAUTION CAUTION CAUTION CAUTION Hazards NEVER operate equipment with covers, Other important messages are provided throughout this or guards removed. Keep fingers, hands, manual to help prevent damage to your light tower, other hair and clothing away from all moving property, or the surrounding environment. parts to prevent injury. Accidental Starting Hazards CAUTION
Resumo do conteúdo contido na página número 8
MT-74FA — RULES FOR SAFE OPERATION ■NEVER touch the hot exhaust Read this manual! DANGER DANGER DANGER DANGER DANGER manifold, muffler or cylinder. Allow these parts to cool before servicing Failure to follow instructions in this manual may lead engine or rammer. to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when ■ High Temperatures – Allo
Resumo do conteúdo contido na página número 9
MT-74FA — RULES FOR SAFE OPERATION ■ ALWAYS stop the engine before servicing, adding fuel and MAINTENANCE oil. ■ NEVER lubricate components or attempt service on a ■ NEVER run engine without air filter. Severe engine may running rammer. occur. ■ ALWAYS allow the rammer a proper amount of time to ■ ALWAYS service air cleaner frequently to prevent carburetor cool before servicing. malfunction. ■ Keep the rammer in proper running condition. ■ ALWAYS check the machine for loosened threads or bolt
Resumo do conteúdo contido na página número 10
MT-74FA — OPERATION AND SAFETY DECALS Machine Safety Decals The MQ Mikasa tamping rammer is equipped with a number of safety decals. These decals are provided for operator safety and maintenance information. Figure 1 and 1A below and preceeding page illustrates these decals as they appear on the machine. Should any of these decals become unreadable, replacements can be obtained from your dealer. Figure 1. Rammer Operation and Safety Decals PAGE 10 — MT-74FA — OPERATION AND PARTS MANUAL — REV.
Resumo do conteúdo contido na página número 11
MT-74FA — OPERATION AND SAFETY DECALS Figure 1A. Rammer Operation and Safety Decals MT-74FA — OPERATION AND PARTS MANUAL — REV. #3 (11/08/07) — PAGE 11
Resumo do conteúdo contido na página número 12
MT-74FA — GENERAL INFORMATION Definition of Tamping Rammer Handle Operation CAUTION CAUTION CAUTION CAUTION CAUTION The Mikasa MT-74FA tamping rammer is a powerful compacting tool capable of applying a tremendous force in consecutive impacts to a soil surface. Its applications include soil compacting Before starting operation check the lifting for road, embankments and reservoirs as well as backfilling for handle to: gas pipelines, water pipelines and cable installation work. The impact force o
Resumo do conteúdo contido na página número 13
MT-74FA — SPECIFICATIONS Ts T TTs Ta a a a ab b b b bllllle e e e e1 1 1 1 1..... M M M M MT T T T T-----7 7 7 7 74 4 4 4 4F F F F FA A A A A R R R R Ra a a a am m m m mm m m m me e e e er r r r r S S S S Sp p p p pe e e e ec c c c ciiiiif f f f fiiiiic c c c ca a a a at t t t tiiiiio o o o on n n n ns s s MA ODEL MT-74F O) verall Height 41.5 in (1055 mm O) verall Width 16.1 in (410 mm O) ver Length 28.9 in (735 mm S) hoe Size (L x W) 13.4 x 11.2 in (340 x 285 mm B0 lows/minute 640-68 I) mpact F
Resumo do conteúdo contido na página número 14
MT-74FA — CONTROLS AND COMPONENTS Figure 2. MT-74FA Rammer Figure 2 shows the location of the controls and components 8. Foot – Laminated wood with tempered steel plate for for the MT-74FA Tamping Rammer. The functions of each superior shock absorption. control is described below: 9. Oil Level Sight Glass – Indicates the level of oil in the oil bath reservoir. 1. Throttle Lever – Controls engine speed and the tamping 10. Recoil Starting Handle – Used when starting the engine. action of the ram
Resumo do conteúdo contido na página número 15
MT-74FA — BASIC ENGINE Figure 3. Robin EH-12-2D Engine Controls and Components INITIAL SERVICING The engine (Figure 3) must be checked for proper lubrication and 5. Recoil Starter (pull rope) – Manual-starting method. Pull filled with fuel prior to operation. Refer to the manufacturer's Engine the starter grip until resistance is felt, then pull briskly and smoothly. manual for instructions & details of operation and servicing. 6. Engine ON/OFF Switch – Controls the starting and 1. Secondary
Resumo do conteúdo contido na página número 16
MT-74FA — OPERATION This section is intended to assist the operator with the initial Engine start-up of the MT-74FA Tamping Rammer. It extremely important 1. Fill the fuel tank (Figure 5) with unleaded gasoline. At the that this section be read carefully before attempting to operate same time, check the engine oil and make it a habit to the rammer. replenish it often. DO NOT use your rammer until this section is thoroughly understood. Read Manual CAUTI CAUTI CAUTION CAUTI CAUTI Failure to under
Resumo do conteúdo contido na página número 17
MT-74FA — OPERATION Inspection 3. Close the choke lever (Figure 9) and move the throttle lever to the "Full Open" position. Turning the choke lever 90 1. Check all nuts, bolts fasteners for tightness. Retighten as degrees clockwise closes the choke . In cold weather, start the necessary. unit with choke fully closed. In warm weather or when the 2. Clean any dirt from the recoil starter and foot pedestal. Wipe engine is warm, the unit can be started with choke halfway the entire unit clean
Resumo do conteúdo contido na página número 18
MT-74FA — OPERATION Operation Stopping The Engine 1. To start the rammer tamping action, move the throttle lever Normal Shutdown (Figure 11) quickly from IDLE (close) to the FULL OPEN 1. Move throttle lever quickly from the FULL OPEN to IDLE position . DO NOT move the throttle lever slowly as this may position (Figure 12) and run the engine for three minutes at cause damage to the clutch or spring. low speed. After the engine cools, turn the engine start/stop switch to the “STOP” position (F
Resumo do conteúdo contido na página número 19
MT-74FA — MAINTENANCE ■ The air cleaner (Figure 12 ) on the engine side will hardly Maintenance be contaminated, if it is, however after cleaning the element Perform the scheduled maintenance procedures as indicated: with kerosene, dip it in mixed oil consisting of 3 parts of DAILY gasoline and 1 part of engine oil. Then tightly squeeze outer ■ Thoroughly remove dirt and oil from the engine and control primary element (sponge) and shake off well the inner area. Clean or replace the air cleaner e
Resumo do conteúdo contido na página número 20
MT-74FA — TROUBLESHOOTING GUIDE TABLE 4. ENGINE TROUBLESHOOTING SYMPTOM POSSIBLE PROBLEM SOLUTION Difficult to start Ignition plug being bridge? Check ignition system. Carbon deposit at ignition? Clean or replace ignition. Fuel is available but spark plug will not ignite. (Power available Short circuit due to defective Replace insulators. at high tension cable). insulators? Improper spark gap? Set spark plug gap to the correct gap. Short circuit at stop switch? Check stop switch circuit. Replace
