Resumo do conteúdo contido na página número 1
®
CUSTOM EDITION
Please read this manual and save it Please read this manual and save it
w with your original sales receipt. ith your original sales receipt.
T Tools needed for assembly: Phillips Screwdriver ools needed for assembly: Phillips Screwdriver
( (not included) and Assembly T not included) and Assembly Tool (included). ool (included).
® ®
U Use only with a Power Wheels se only with a Power Wheels 12 V 12 Vo olt Lead Acid lt Lead Acid
R Rechargeable Batter echargeable Battery y w
Resumo do conteúdo contido na página número 2
IMPORTANT INFORMATION ELECTRICAL HAZARD WARNING • Battery can fall out and injure a child if vehicle tips over. Always use battery retainer. • PREVENT FIRE - Never modify the electrical system. Alterations could cause a fi re resulting in serious injury and could also ruin the electrical system. - Use of the wrong type battery or charger could cause a fi re or explosion resulting in serious injury. ® ® - Use of Power Wheels components in products other than Power Wheels vehicles could
Resumo do conteúdo contido na página número 3
IMPORTANT INFORMATION • Read this manual carefully for important safety • If a thermal fuse in a battery continually trips under information and operating instructions before using normal driving conditions, please contact your local ® your vehicle. Keep this manual for future reference, as it Power Wheels Authorized Service Center. contains important information. • To prevent damaging the motors and gears, teach your • The vehicle is designed for use on grass, asphalt, and child to stop the
Resumo do conteúdo contido na página número 4
PARTS • If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. Note: Some parts of this product have been packed with a protective foam cover. After removing the foam cover, you may notice a cloudy film on the parts. Wipe these parts with a clean, dry, soft cl
Resumo do conteúdo contido na página número 5
PARTS Steering Wheel 2 Headlights 2 Headlight Lenses 2 Taillights Steering (Left and Right) (Left and Right) (Left and Right) Column Cap 2 Wheel Covers 2 Door Plates 2 Bushings Steering Wheel Cap 2 Hubcaps 7 / " (1,1 cm) Washer – 2 16 2 Short Seat Belts Long Seat Belt 3 / " (0,95 cm) -16 Lock Nut – 2 8 5 1 /32" (0,4 cm) x 1 /2" (3,8 cm) Pin – 1 Assembly Tool 3 #8 x / " (1,9 cm) Screw – 34 4 2 Front Wheels Key Assembly (Left and Right) 1 1 / x 1 / " (0,6 cm x 3,1 cm) Screw – 2 4 4 Fasteners Sho
Resumo do conteúdo contido na página número 6
PARTS PICTURE Note: Some parts shown are assembled on both sides of the vehicle. X3419pr-0920 6
Resumo do conteúdo contido na página número 7
BATTERY CHARGING • Make sure you charge the battery for at least 18 hours ® ELECTRICAL HAZARD using the enclosed Power Wheels 12 volt charger before operating your vehicle for the first time. Charge the battery for at least 14 hours after each use of the vehicle. WARNING Never charge the battery longer than 30 hours. Failure to • Battery can fall out and injure a child follow these instructions may damage your battery and will void your warranty. if vehicle tips over. Always use ® • Use o
Resumo do conteúdo contido na página número 8
ASSEMBLY WARNING Children can be harmed by small parts, sharp edges and sharp points in the vehicle's unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery, or help in assembly of the vehicle. Front Axle Front Wheel 2 Hint: There is a right and a left front wheel. Place the right wheel (marked R) on the passenger side of the vehicle, and the left wheel (marked L) on the driver sid
Resumo do conteúdo contido na página número 9
ASSEMBLY Front End 3 /8" (0,95 cm) -16 Lock Nut 6 Assembly Tool 4 • Fit the front end onto the vehicle. • Insert the tabs on the back edge of the front end into the 3 • Place a /8" (0,95 cm) -16 lock nut (rounded side out) slots in the vehicle. onto a front axle. 3 " IMPORTANT: Tighten the lock nut firmly using the closed #8 x /4 (1,9 cm) Screws end of the assembly tool. • Repeat this procedure to fasten the other front wheel 3 assembly with the other /8" (0,95 cm) -16 lock nut. 7 3 " • Inser
Resumo do conteúdo contido na página número 10
ASSEMBLY 1 1 " " 3 /4 x 1 /4 (0,6 cm x 3,1 cm) Screws " #8 x /4 (1,9 cm) Screws 3 " #8 x /4 (1,9 cm) Screws Battery Compartment 3 " #8 x /4 (1,9 cm) Screws 10 3 8 TOP VIEW " (1,9 cm) • Insert eight #8 x /4 screws into the bumper and tighten. 1 1 " " • Insert two /4 x 1 /4 (0,6 cm x 3,1 cm) screws inside of the battery compartment and into the front end of the vehicle. Tighten the screws. 36 37 11 • Apply the labels to the headlights. • Before applying the labels, wipe the surface of the ve
Resumo do conteúdo contido na página número 11
ASSEMBLY Doors Headlights 13 15 • Fit the headlights (left and right) onto the bumper. Hint: Headlights only fit one way. If they do not seem to fit, • Fit the door pegs onto the holes near the front end of try the other side. the vehicle. Hint: There is a left and right door. They are designed to be 3 assembled one way. " #8 x /4 (1,9 cm) Screws Plates 14 3 " • Insert one #8 x /4 (1,9 cm) screw into the top edge of each headlight. Tighten the screws. 16 • Fit the large hole on the plates to
Resumo do conteúdo contido na página número 12
ASSEMBLY 3 3 " " #8 x /4 (1,9 cm) #8 x /4 (1,9 cm) Windshield/ Screws Screws Dash 17 FRONT VIEW 19 3 " • Insert three #8 x /4 (1,9 cm) screws into each plate • Fit the tabs on the windshield/dash into the slots in the and tighten. front end of the vehicle. Motor Harness 3 " #8 x /4 (1,9 cm) Connector Screws Front 20 3 " • Insert four #8 x /4 (1,9 cm) screws into the base of the windshield/dash. Tighten the screws. BACK VIEW 18 • Position the motor harness connector towards the front of the
Resumo do conteúdo contido na página número 13
ASSEMBLY 3 " #8 x /4 (1,9 cm) Screws Steering Column Steering Rod 21 DASH VIEW 3 " • Insert two #8 x /4 (1,9 cm) screws into the sides of the windshield/dash. Tighten the screws. • Close the doors on the vehicle. IMPORTANT! Turn the vehicle on its side or over to complete assembly steps 23-28. 23 A B Metal Steering • Insert the curved end of the steering column through the Vehicle Bar Hole Column hole in the steering rod. Hole Large Opening Steering Wheel Steering Column 22 BOTTOM VIEW •
Resumo do conteúdo contido na página número 14
ASSEMBLY Steering Column Cap Press Wheel P Press Wheel ress Wheel Lift Steering Column 25 • While pressing down on the steering wheel, grasp the steering column under the dash and pull it up as far as it will go. #8 x 3/4" (1,9 cm) #8 x 3/4" (1,9 cm) 5 1 " 27 S Screws crews • Insert the /32" (0,4 cm) x 1 /2 (3,8 cm) pin through the hole in the steering column. • Grasp the steering column again and pull down to fit the • Fit the steering column cap onto the end of the pin into the center of
Resumo do conteúdo contido na página número 15
ASSEMBLY Hood 1,5V x 4 "C" (LR14) Loosen This Screw FRONT VIEW 29 • Locate the FM Radio on the dash. • Loosen both screws in the battery compartment door. • Fit the long tabs on the hood into the slots in the front • Remove the battery compartment door. end of the vehicle. • Insert four, new "C" (LR14) alkaline batteries. Hint: We recommend using alkaline batteries for longer battery life. Hood • Replace the battery compartment door and tighten the screws. • When sounds become faint or stop,
Resumo do conteúdo contido na página número 16
ASSEMBLY 3 " Short Seat Belts #8 x /4 (1,9 cm) Screws Seat Long Seat Belt 33 BACK VIEW 31 3 " • Insert two #8 x /4 (1,9 cm) screws into the back of the seat. Tighten the screws. Note: Make sure the fasteners on both short seat belts face each other. • Fit the folded end of each short seat belt down through the outer slots in the seat. Do not insert the folded tab into the slot. Pull up on each seat belt to make sure it is secure. Note: Make sure the fasteners on the long seat belt are fac
Resumo do conteúdo contido na página número 17
ASSEMBLY Wings Truck Bed 37 Taillight Tabs • Place the truck bed over the back end of the vehicle. 35 3 " #8 x /4 (1,9 cm) • Fit the wing tabs into the slots in the top edge near the Screws rear of the vehicle. Hint: There is a left and right wing. They are designed to be assembled one way. Make sure the tabs on the top of the taillights fit into the bottom of each wing. 3 " #8 x /4 (1,9 cm) Screws 38 3 " • Insert three #8 x /4 (1,9 cm) screws into the top of the truck bed. Tighten the sc
Resumo do conteúdo contido na página número 18
DECORATION Proper label application will help to keep the labels looking their best! When applying labels, keep the following guidelines in mind: • Wash your hands before applying the labels. • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils. • Place the labels exactly as shown in the illustrations. • For best results, avoid repositioning a label once it has been applied to the vehicle. • After applying a label, rub the label firm
Resumo do conteúdo contido na página número 19
DECORATION 41 5 RIGHT SIDE 4 28 28 42 38 40 6 LEFT SIDE 4 28 28 39 42 11 12 13 14 32 DASH VIEW 19 X3419pr-0920
Resumo do conteúdo contido na página número 20
BATTERY INSTALLATION BATTERY CARE AND DISPOSAL ® IMPORTANT! Use only a Power Wheels 12 volt lead-acid rechargeable battery. Use of any other battery will damage BATTERY CARE your vehicle. Make sure that you charge the battery for at ® least 18 hours using the enclosed Power Wheels 12 volt If a battery leak develops, avoid contact with the leaking charger before operating your vehicle for the first time. acid and place the damaged battery in a plastic bag. See Charge the battery for at l
