Manual do usuário Campbell Hausfeld DX151905CD

Resumo do conteúdo contido na página número 1

See Warranty on page 8 for important information about commercial use of this product.
Operating Instructions and Parts Manual DX111425CD & DX151905CD
DX111425CD & DX151905CD
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain
Limited Warranty
the product described. Protect yourself and others by observing all safety information. Failure to comply with
instructions could result in personal injury and/or property damage! Retain instr

Resumo do conteúdo contido na página número 2

Operating Instructions and Parts Manual DX111425CD & DX151905CD Do not misuse this 9. Do not wear jewelry when General Safety ! WARNING Notes product. Excessive operating any tool. Jewelry may exposure to vibration, work in become caught in moving parts Information (Cont’d.) awkward positions, and repetitive and result in serious personal WORK AREA work motions can cause injury to injury. Do not operate a hands and arms. Stop using any tool if ! TOOL USE AND CARE WARNING power tool in an discomf

Resumo do conteúdo contido na página número 3

Operating Instructions and Parts Manual DX111425CD & DX151905CD create a risk of fire when used with shock. If an extension cord must be DRIVING MACHINE SCREWS Operation (Cont’d.) Maintenance General Safety another battery. used, make sure: 1. Drill and tap correct hole size for 9. Combination pilot drill, shank drill KEEP TOOL CLEAN • That the size of the cord is at least Information (Cont’d.) Up to 24 volts DC fastener to be used. and countersink bits are available ! DANGER as specified in ch

Resumo do conteúdo contido na página número 4

Operating Instructions and Parts Manual DX111425CD & DX151905CD the total work life of the pack. For forward rotation, firmly press in on 5. Place tip of drill bit in dent made by clamp it securely in place. If a Safety Instructions Operation (Cont’d.) Discharging the pack beyond this point the lever marked FWD. For reverse center punch, hold drill square with backing block is not used with Do not use the can damage the pack. rotation, firmly press in on the lever work, and start the motor. spa