Resumo do conteúdo contido na página número 1
R
INSTALLATION AND OPERATING INSTRUCTIONS
Electric Griddles, Drop-In Style
Models: EGD -1824, 1836, 1848, 2436, 2448, 2472
Please complete this information and ain ret this manual for the life of the equipment. For
arranty W Service and/or s, Part this information is required.
Model Number Serial Number Date Purchased
CONTENTS
allation Inst s Cutout 2
Electrical Connections 7
General 13
U.L. Conditions Of ability Accept 13
Layout 13
allation Inst 13
Owner s Information 15
Cleaning The Griddle
Resumo do conteúdo contido na página número 2
U.L. CONDITIONS OF ABILITY ACCEPT A. This equipment must be alled inst in an all al met fixture of steel or ainless st steel construction, .078 inch thick minimum for the top and supporting frame. Side enclosure to be at least 22 MSG minimum thickness. B. A removable bottom enclosure must be provided under each drop-in unit and be made of al met construction of at least 22 MSG min. If ventilating openings are provided in the bottom enclosure they must not allow the entrance of a 3/4 inch diamete
Resumo do conteúdo contido na página número 3
EGD-1824 2 P AGE ON NOTES REFERENCE
Resumo do conteúdo contido na página número 4
EGD-2436 EGD-1836, 2 PAGE ON NOTES REFERENCE
Resumo do conteúdo contido na página número 5
EGD-2448 EGD-1848, 2 P AGE ON NOTES REFERENCE
Resumo do conteúdo contido na página número 6
EGD-2472 2 PAGE ON NOTES REFERENCE
Resumo do conteúdo contido na página número 7
ELECTRICAL CONNECTIONS ARNING: W Electrical and grounding connections must comply with the applicable portions of the national electrical code and/or other local electrical codes. ARNING: W Disconnect electrical power supply and place a ag t at the disconnect switch indicating that you are working on the circuit. erminal T Box Location. As indicated in Fig. 1, the terminal boxes can be located at either the t lef front or the right rear of the griddle. When shipped from the , factory the device
Resumo do conteúdo contido na página número 8
EGD-1836, AC, 208/240/480V 1 & 3 Phase (Wiring Diagram) 8
Resumo do conteúdo contido na página número 9
EGD-2436, AC, 208/240/480V 1 & 3 Phase (Wiring Diagram) 9
Resumo do conteúdo contido na página número 10
EGD-1848, AC, 208/240/480V 1 & 3 Phase (Wiring Diagram) 10
Resumo do conteúdo contido na página número 11
EGD-2448, AC, 208/240/480V 1 & 3 Phase (Wiring Diagram) 11
Resumo do conteúdo contido na página número 12
EGD-2472, AC, 208/240/480V 3 Phase (Wiring Diagram) 12
Resumo do conteúdo contido na página número 13
GENERAL Drop-In Griddles are designed to be alled inst into al met fixtures or fabricated s. top Fixture or top must be ficiently suf rigid to support device weight without warping. Emphasis is on simplifying the layout and fabrication. These instructions covers all models. The floor plans for the griddles shows overall and other key dimensions of the device and their s relationship to the fixture or top into which they will be alled. inst U.L.CONDITIONS OF : ABILITY ACCEPT A. This equipment mus
Resumo do conteúdo contido na página número 14
1. Hobart furnishes a gasket or seal that must be placed around the perimeter of the hole in the top as shown in Fig. 3. This gasket may be temporarily held in place with ape. t Do not place the aple st securing the gasket ends on or near a . corner 2. A number of s, clamp such as the one shown in Fig. 3, appear at intervals along the . perimeter Pull s clamp outward so that the griddle frame clears them when it is dropped into place. 3. Drop the griddle into position by lowering it into the fix
Resumo do conteúdo contido na página número 15
OWNER ’S TION INFORMA CLEANING THE GRIDDLE TION AFTER ALLA INST Before using the griddle for the first time, be sure to remove the factory-applied rust preventive compound. Add a mild detergent to hot water and wash the griddle well. Rinse with a clean, damp cloth and wipe . dry CONTROLS The heat of the griddle surface is controlled by turning the dial knobs (recessed in the front control ane!). p arate Sep signal s light cycle with each control, whenever the at thermost calls for heat the signa
Resumo do conteúdo contido na página número 16
View) (Exploded EGD-1848 & EGD-1836 EGD-1824, 18 17 22 16 20 15 14 1 2 13 27 10 3 29 29 24 23 9 21 27 19 12 4 28 27 11 5 26 22 25 8 6 7 22
Resumo do conteúdo contido na página número 17
ARTS P LIST DROP-IN ELECTRIC GRIDDLES, EGD-1824, -1836, -1848 ITEM ART P NUMBER DESCRIPTION 1 1439722 TING , HEA ELEMENT 208 T VOL 1439723 TING , HEA ELEMENT 240 T VOL 2 64256301 PRESSURE TE PLA 3 64257301 BULB CLAMP Y ASSEMBL 4 64634001 BAFFLE 5 64257801 TERMINAL BLOCK BOX 6 64257901 COVER 7 126035 1 TERMINAL BLOCK 8 64258101 OM BOTT ANEL P FOR -1824 64258201 OM BOTT ANEL P FOR -1836 64258301 OM BOTT ANEL P FOR -1848 9 64767903 BRACE Y ASSEMBL FOR -1824 64767904 BRACE Y ASSEMBL FOR -1836 643066
Resumo do conteúdo contido na página número 18
View) (Exploded EGD-2472 & EGD-2448 EGD-2436, 10 12 13 9 8 11 20 1 23 21 24 18 22 17 22 16 2830 22 27 29 5 2 2830 3 22 27 15 26 25 19 14 6 4 7
Resumo do conteúdo contido na página número 19
ARTS P LIST DROP-IN ELECTRIC GRIDDLES, EGD-2436, -2448, -2472 ITEM ART P NUMBER DESCRIPTION 1 1439725 TING , HEA ELEMENT 208 T VOL 1439726 TING , HEA ELEMENT 240 T VOL 2 64256701 PRESSURE TE PLA 3 64257301 BULB CLAMP Y ASSEMBL 4 64625100 BAFFLE 5 64257801 TERMINAL BLOCK BOX 64257901 COVER 6 7 126035 1 TERMINAL BLOCK 8 64258202 OM BOTT ANEL P FOR -2436 64739201 1 EACH FOR -2448 64739401 1 EACH FOR -2448 64258401 FOR -2472 9 64767904 BRACE Y ASSEMBL FOR -2436 64306601 FOR -2448 64335603 FOR -2472
Resumo do conteúdo contido na página número 20
APW WYOTT EQUIPMENT LIMITED ARRANTY W APW yott W Foodservice Equipment Company warrants it ’s equipment against defects in materials and workmanship, subject to the following conditions: This warranty applies to the original owner only and is not assignable. Should any product fail to function in its intended manner under normal use within the limits defined in this , warranty at the option of APW yott W such product will be repaired or replaced by APW yott W or its Authorized Service . Agency A
