Resumo do conteúdo contido na página número 1
®
BATWING
ROTARY CUTTER
BW240HD, BW240HDQ
MAN0763
(Rev. 7/8/2010)
OPERATOR'S MANUAL
Resumo do conteúdo contido na página número 2
TO THE DEALER: ® Assembly and proper installation of this product is the responsibility of the Woods dealer. Read manual instructions and safety rules. Make sure all items on the Dealer’s Pre-Delivery and Delivery Check Lists in the Operator’s Manual are completed before releasing equipment to the owner. The dealer must complete the online Product Registration form at the Woods Dealer Website which certifies that all Dealer Check List items have been completed. Please contact your dealer to com
Resumo do conteúdo contido na página número 3
TABLE OF CONTENTS INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 SAFETY VIDEO ORDER FORM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 SAFETY RULES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumo do conteúdo contido na página número 4
SPECIFICATIONS BW240HD / BW240HDQ Cutting Height (Varies with tire selection) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2" - 15" Cutting Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240" (20’) Overall Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .249" Transport
Resumo do conteúdo contido na página número 5
Safety Video Order Form BE SAFE! BE ALERT! BE ALIVE! BE TRAINED Before Operating Mowers! Safety Training Does Make a Difference. ASSOCIATION OF EQUIPMENT MANUFACTURERS Free Mower Safety Video Fill out and return the order form and we will send you a FREE VHS or DVD video outlining Industrial and Agricultural Mower Safety Practices. The 22 minute video, developed in cooperation with AEM (Association of Equipment Manufacturers), reinforces the proper procedures to follow while operating your m
Resumo do conteúdo contido na página número 6
Also, available from the Association of Equipment Manufacturers: A large variety of training materials (ideal for groups) are available for a nominal charge from AEM. Following is a partial list: ● Training Package for Rotary Mowers/Cutters-English Contains: DVD & VHS (English) Guidebook for Rotary Mowers/Cutters (English) AEM Industrial/Agricultural Mower Safety Manual (English) AEM Agricultural Tractor Safety Manual (English) ● Training Package for Rotary Mowers/Cutters-English/Spanish Cont
Resumo do conteúdo contido na página número 7
SAFETY RULES ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! TACT A PHYSICIAN IMMEDIATELY IF FLUID Safety is a primary concern in the design and ENTERS SKIN OR EYES. DO NOT DELAY. manufacture of our products. Unfortunately, our efforts to provide safe equipment can be wiped Never allow children or untrained persons to out by an operator’s single careless act. operate equipment. In addition to the design and configuration of PREPARATION equipment, hazard control and accident preven- tion are d
Resumo do conteúdo contido na página número 8
SAFETY RULES ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! (Safety Rules continued from previous page) Inspect and clear area of stones, branches, or other hard objects that might be thrown, causing Make sure driveline guard tether chains are injury or damage. attached to the tractor and equipment as shown in the pamphlet that accompanies the driveline. TRANSPORTATION Replace if damaged or broken. Check that driveline guards rotate freely on driveline before putting Power unit must be equ
Resumo do conteúdo contido na página número 9
SAFETY RULES ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Full chain or rubber shielding must be installed remove key, inspect, and repair any damage before when operating in populated areas or other areas resuming operation. where thrown objects could injure people or dam- Continuous operation while the clutch is slip- age property. ping could cause heat build-up resulting in fire. � If this machine is not equipped with full chain Adjust slip clutch pressure by tightening springs to or
Resumo do conteúdo contido na página número 10
SAFETY RULES ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! (Safety Rules continued from previous page) Never perform service or maintenance with engine running. Never go underneath equipment (lowered to the ground or raised) unless it is properly blocked and Do not disconnect hydraulic lines until machine secured. Never place any part of the body under- is securely blocked or placed in lowest position neath equipment or between moveable parts even and system pressure is released by operat
Resumo do conteúdo contido na página número 11
SAFETY & INSTRUCTIONAL DECALS ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Replace Immediately If Damaged! MODEL NO. SERIAL NO. Woods Equipment Company Oregon, Illinois, U.S.A. 1 - SERIAL NUMBER PLATE PN 1006348 - Located on Wheel Rims EXPLOSION WARNING HAZARD RELEASE ALL AIR PRESSURE BEFORE LOOSENING BOLTS. FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY OR DEATH. 2 - FRONT AMBER REFLECTOR MAX. SPEED: 20 MPH, MAX. WEIGHT: 4000 LBS., MAX. AIR PRESSURE: 40 PSI. (PN 1002940) 3 - REAR RE
Resumo do conteúdo contido na página número 12
SAFETY & INSTRUCTIONAL DECALS ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Replace Immediately If Damaged! 7 - PN 15503 WARNING DANGER DO NOT EXCEED PTO SPEED OF 5 - PN 15922 1000 RPM PTO speeds higher than 1000 RPM can cause equipment failure and personal injury. 15922-C OR ROTATING BLADES AND THROWN OBJECTS WARNING Do not put hands or feet under or into mower when engine is running. Before mowing, clear area of objects that may be thrown by blade. 540
Resumo do conteúdo contido na página número 13
28-1/4" SAFETY & INSTRUCTIONAL DECALS ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Replace Immediately If Damaged! 12 - PN 1004991 TRANSPORT LOCK WARNING AND CYLINDER REQUIREMENTS RAISED CUTTER CAN DROP AND CRUSH Cutte ers must be equipped with transport lock. SINGLE-ACTING FULL EXTENSION stands. All tr ransport components must be functional, kept in good Blocking up prevents cutter dropping from hydraulic leak down, Bloc hydraulic system failures, or mechanical component failures.
Resumo do conteúdo contido na página número 14
OPERATION The designed and tested safety of this machine sturdy, rough-soled work shoes and protective depends on it being operated within the limitations as equipment for eyes, hair, hands, hearing, and head; explained in this manual. Be familiar with and follow all and respirator or filter mask where appropriate. safety rules in the manual, on the cutter and on the tractor. CONNECTING CUTTER TO TRACTOR The safe operation of this cutter is the responsibility of NOTICE the operator, who must be
Resumo do conteúdo contido na página número 15
Hydraulic Connection Cutting Height Adjustment 1. Inspect hydraulic hoses to ensure they are in good NOTICE condition. ■ Avoid ground contact with blades. Striking ground with blades produces one of the most dam- 2. Clean the fittings before connecting them to the aging shock loads a cutter can encounter. If this tractor hydraulic ports. occurs repeatedly, the cutter, driveline, and gear- 3. Route the hose through the hose holder at the boxes will be damaged. hitch and be sure the hose can slid
Resumo do conteúdo contido na página número 16
cutter drive system. Increase throttle to recommended PTO operating RPM. Be sure operator is familiar with all controls and can stop tractor and cutter quickly in an emergency. The operator should give complete, undivided attention to operating tractor and cutter. CUTTER OPERATION When beginning operation of the cutter, make sure that all persons are in a safe location. Power for operating the cutter is supplied by the tractor PTO. Operate PTO at 540 (1000 RPM for "Q" models). Know how to stop
Resumo do conteúdo contido na página número 17
Use extreme care and reduce ground speed on Always attach safety chain to tractor drawbar slopes and rough terrain. when transporting unit. Watch for hidden hazards on the terrain during Never exceed 20 mph (32.2 km/h) during trans- operation. port. Never allow riders on power unit or attachment. CAUTION Do not operate PTO during transport. Stop power unit and equipment immediately Do not operate or transport on steep slopes. upon striking an obstruction. Turn off engine, Do not operate
Resumo do conteúdo contido na página número 18
Center Section Lock-Up PRE-OPERATION CHECK LIST (OWNER'S RESPONSIBILITY) ___ Review and follow all safety rules and safety decal instructions on page 7 through page 13. ___ Check that all safety decals are installed and in good condition. Replace if damaged. ___ Check that equipment is properly and securely attached to tractor. ___ Make sure driveline spring-activated locking pin or collar slides freely and is seated firmly in trac- DP8A tor PTO spline groove. ___ Check all lubrication points an
Resumo do conteúdo contido na página número 19
OWNER SERVICE The information in this section is written for operators BLOCKING METHOD who possess basic mechanical skills. If you need help, To minimize the potential hazards of working under- your dealer has trained service technicians available. neath the cutter, follow these procedures: For your protection, read and follow the safety informa- tion in this manual. Before performing any service or maintenance, lower equipment to ground or block securely, turn off engine, re
Resumo do conteúdo contido na página número 20
1. Driveline U-joint 10 Hours 2. Telescoping shaft 10 Hours 3. Carrier bearing block 40 Hours 4. CV body assembly 10 hours (10 pumps minimum) 5. Driveline shield 10 Hours 6. Splined yoke 10 Hours 7. Gearbox (above lower Daily line on dipstick) 8. Tongue pivot 40 Hours 9. Wheel yoke pivot 40 Hours 10. Gearbox (bottom of Daily side hole) 11. Tailwheel spindle 20 Hours 12. Turnbuckle 40 Hours Figure 4. Jackstand Placement and Lubrication Points until oil runs out the side plug on gearbox. Wing Ge
