Resumo do conteúdo contido na página número 1
®
BATWING-
ROTARY CUTTER
BW15LH
MAN0810
(Rev. 07/09/2010)
OPERATOR'S MANUAL
Resumo do conteúdo contido na página número 2
TO THE DEALER: ® Assembly and proper installation of this product is the responsibility of the Woods dealer. Read manual instructions and safety rules. Make sure all items on the Dealer’s Pre-Delivery and Delivery Check Lists in the Operator’s Manual are completed before releasing equipment to the owner. The dealer must complete the online Product Registration form at the Woods Dealer Website which certifies that all Dealer Check List items have been completed. Please contact your dealer to com
Resumo do conteúdo contido na página número 3
TABLE OF CONTENTS INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 SAFETY VIDEO ORDER FORM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 SAFETY RULES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumo do conteúdo contido na página número 4
SPECIFICATIONS BW15LH Cutting Height (Varies with tire selection) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1" - 12" Cutting Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180" (15’) Overall Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190" Transport Width . . . .
Resumo do conteúdo contido na página número 5
Safety Video Order Form BE SAFE! BE ALERT! BE ALIVE! BE TRAINED Before Operating Mowers! Safety Training Does Make a Difference. ASSOCIATION OF EQUIPMENT MANUFACTURERS Free Mower Safety Video Fill out and return the order form and we will send you a FREE VHS or DVD video outlining Industrial and Agricultural Mower Safety Practices. The 22 minute video, developed in cooperation with AEM (Association of Equipment Manufacturers), reinforces the proper procedures to follow while operating your m
Resumo do conteúdo contido na página número 6
Also, available from the Association of Equipment Manufacturers: A large variety of training materials (ideal for groups) are available for a nominal charge from AEM. Following is a partial list: ● Training Package for Rotary Mowers/Cutters-English Contains: DVD & VHS (English) Guidebook for Rotary Mowers/Cutters (English) AEM Industrial/Agricultural Mower Safety Manual (English) AEM Agricultural Tractor Safety Manual (English) ● Training Package for Rotary Mowers/Cutters-English/Spanish Cont
Resumo do conteúdo contido na página número 7
SAFETY RULES ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! TACT A PHYSICIAN IMMEDIATELY IF FLUID Safety is a primary concern in the design and ENTERS SKIN OR EYES. DO NOT DELAY. manufacture of our products. Unfortunately, our efforts to provide safe equipment can be wiped Never allow children or untrained persons to out by an operator’s single careless act. operate equipment. In addition to the design and configuration of PREPARATION equipment, hazard control and accident preven- tion are d
Resumo do conteúdo contido na página número 8
SAFETY RULES ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! (Safety Rules continued from previous page) Do not operate PTO during transport. Before starting power unit, check all equipment Do not operate or transport on steep slopes. driveline guards for damage. Replace any damaged Do not operate or transport equipment while guards. Make sure all guards rotate freely on all under the influence of alcohol or drugs. drivelines. If guards do not rotate freely on drive- The maximum transport
Resumo do conteúdo contido na página número 9
SAFETY RULES ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Always comply with all state and local lighting MAINTENANCE and marking requirements. Before servicing, adjusting, repairing or unplug- Never allow riders on power unit or attachment. ging, stop tractor engine, place all controls in neu- tral, set park brake, remove ignition key, and wait Power unit must be equipped with ROPS or for all moving parts to stop. ROPS cab and seat belt. Keep seat belt securely fastened. Falling off po
Resumo do conteúdo contido na página número 10
SAFETY RULES ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! (Safety Rules continued from previous page) Service and maintenance work not covered in OWNER SERVICE must be done by a qualified Keep all persons away from operator control dealership. Special skills, tools, and safety proce- area while performing adjustments, service, or dures may be required. Failure to follow these maintenance. instructions can result in serious injury or death. Make certain all movement of equipment com- Exp
Resumo do conteúdo contido na página número 11
SAFETY & INSTRUCTIONAL DECALS ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Replace Immediately If Damaged! MODEL NO. SERIAL NO. Woods Equipment Company Oregon, Illinois, U.S.A. 1 - SERIAL NUMBER PLATE PN 1006348 - Located on Wheel Rims BE CAREFUL! 2 - FRONT AMBER REFLECTOR (PN 1002940) Use a clean, damp cloth to clean safety decals. 3 - REAR RED REFLECTOR Avoid spraying too close to decals when using a pressure (PN 57123) washer; high-pressure water can enter through very small scratche
Resumo do conteúdo contido na página número 12
SAFETY & INSTRUCTIONAL DECALS ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Replace Immediately If Damaged! 7 - PN 18864 WARNING DANGER 5 - PN 18866 (540 RPM) 540 RPM ! $ " # ROTATING DRIVELINE 18866-D CONTACT CAN CAUSE DEATH KEEP AWAY! 8 - PN 18865 DO NOT OPERATE WITHOUT - All driveline guards, tractor and equipment shields
Resumo do conteúdo contido na página número 13
28-1/4" SAFETY & INSTRUCTIONAL DECALS ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Replace Immediately If Damaged! 11 - PN 1004991 TRANSPORT LOCK WARNING AND CYLINDER REQUIREMENTS RAISED CUTTER CAN DROP AND CRUSH Cutte ers must be equipped with transport lock. SINGLE-ACTING FULL EXTENSION stands. All tr ransport components must be functional, kept in good Blocking up prevents cutter dropping from hydraulic leak down, Bloc hydraulic system failures, or mechanical component failures.
Resumo do conteúdo contido na página número 14
OPERATION The designed and tested safety of this machine equipment for eyes, hair, hands, hearing, and head; depends on it being operated within the limitations as and respirator or filter mask where appropriate. explained in this manual. Be familiar with and follow all safety rules in the manual, on the cutter and on the CONNECTING CUTTER TO TRACTOR tractor. NOTICE The safe operation of this cutter is the responsibility of ■ For tractors with a 1-3/8" diameter PTO shaft, the operator, who must
Resumo do conteúdo contido na página número 15
When selecting a cutting height, you should consider Interference Check the area of operation. If the ground is rolling and has 1. Be sure that tractor 3-point lift links do not interfere mounds the blades could contact, set the cutting height with hydraulic hoses, cutter driveline, or cutter accordingly. The cutting height (blade edge) is approxi- frame. mately 1" above the bottom of the side skid. 2. Check for straight-ahead operation and at full Cutting Height (Normal Mowing) - Center Sectio
Resumo do conteúdo contido na página número 16
CUTTER OPERATION When beginning operation of the cutter, make sure that all persons are in a safe location. Do not operate or transport on steep slopes. Do not stop, start, or change directions sud- Power for operating the cutter is supplied by the tractor denly on slopes. PTO. Operate PTO at 540. Use extreme care and reduce ground speed on Know how to stop the tractor and cutter quickly in an slopes and rough terrain. emergency. Watch for hidden hazards on the terrain during Engag
Resumo do conteúdo contido na página número 17
TRANSPORTING Power unit must be equipped with ROPS or ROPS cab and seat belt. Keep seat belt securely fastened. Falling off power unit can result in death from being run over or crushed. Keep foldable ROPS system in “locked up” position at all times. Always raise unit and install transport locks before transporting. Leak down or failure of mechanical or hydraulic system can cause equip- DP4a ment to drop. Figure 2. Transport Lock-Up Bar - Right Wing Always attach safety chain to tra
Resumo do conteúdo contido na página número 18
the PTO slip joint is lubricated and that the gear- STORAGE box fluid levels are correct. Follow these steps when storing your cutter: ___ Set tractor PTO at correct rpm for your equip- 1. Clean cutter before storing. See page 23 for ment. cleaning instructions. Store on level, solid ground. ___ Lubricate all grease fitting locations. Make sure 2. Disconnect driveline and secure up off the ground. PTO shaft slip joint is lubricated. 3. Lower wings to ground. ___ Check that all hydraulic hoses an
Resumo do conteúdo contido na página número 19
OWNER SERVICE The information in this section is written for operators BLOCKING METHOD who possess basic mechanical skills. If you need help, To minimize the potential hazards of working under- your dealer has trained service technicians available. neath the cutter, follow these procedures: For your protection, read and follow the safety informa- tion in this manual. Before performing any service or maintenance, lower equipment to ground or block securely, turn off engine, re
Resumo do conteúdo contido na página número 20
1. Driveline U-joint 10 Hours 6. Tongue Pivot 40 Hours 2. Telescoping shaft 10 Hours 7. Wheel yoke pivot 40 Hours 3. CV body assembly 40 hours 8. Tailwheel spindle 20 Hours (10 pumps minimum) 9. Turnbuckle 40 Hours 4. Driveline shield 10 Hours 5. Gearbox (Check oil level) Daily Figure 5. Jackstand Placement and Lubrication Points 4 or –5 in gearboxes. Fill gearbox until oil runs out the LUBRICATION side plug on gearbox. Check gearbox daily for evi- Do not let excess grease collect on or ar
