Resumo do conteúdo contido na página número 1
Introduction
Welcome to the world of sophisticated, early warning laser/radar
detection. You have purchased one of the most advanced laser/radar
detectors available. The LRD 2200SWS is a complete integrated
laser/radar detector. It responds to the X-, K-, and Ka-SuperWideband
radar guns in use today and also provides 360° detection of the latest
speed monitoring system — the laser gun. The built-in Safety Warning
System (SWS™) is capable of detecting a hazardous warning signal
transmitted on the
Resumo do conteúdo contido na página número 2
Speed Detection Systems A speed detection device (often called a radar gun) sends out either a microwave signal or beam of light. When this signal reaches its target, part of the signal is reflected or bounced back toward the emitting gun. The time required for the signal to leave the gun, bounce off an object, and return is used to determine a vehicle’s distance and speed. Radar Radar (Radio Detection and Ranging) is a microwave system for detecting the speed of moving objects by reflected puls
Resumo do conteúdo contido na página número 3
Laser The Laser Speed Detection System, also called LIDAR (for Light Detection and Ranging), uses a laser gun that emits infrared light pulses just outside the spectrum of visible light. Each reflected pulse measures the speed of the object coming toward or going away from the laser gun. Unlike radar, the laser gun emits a very narrow beam of light, so it can pinpoint a speeding car within traffic. The infrared beam spreads out, but slowly and over a longer distance than a radar signal. The lase
Resumo do conteúdo contido na página número 4
Included with Your Radar Detector Windshield Owner’s Guide Clip Printed Straight Power Cord Material Coiled Cigarette Fuses and Adapter Spare Parts If any of these items are missing or damaged, contact your dealer immediately. Be sure to complete and mail the Product Registration Card. 4 njdfjnjnjfnjfjn njdfjnjnjfnjfjn jnkjnjksnkjsnfj jnkjnjksnkjsnfj dfksfmkm dfksfmkm kfmkmkmlf kfmkmkmlf sfkkmmfmsmsm\ sfkkmmfmsmsm\ kkoioionksnkln kkoioionksnkln mmkmkkl mmkmkkl skdmkmkm skdmkmkm sdmkmfmmmk sdmkmf
Resumo do conteúdo contido na página número 5
Controls and Functions 2 1 3 4 5 9 8 6 7 1. Clip Release — Press the clip release button to remove the LRD 2200SWS from the windshield mounting clip. 2. Rear and Side Laser Detector Lenses — For rear and side detection of laser signals. 3. City Button — Press the CITY button to help reduce X-band false alarms while driving in the city. When you turn on the City Mode, the City indicator turns on. While driving on highways, turn off the City Mode for long-range detection. 4. Audio Button — Press t
Resumo do conteúdo contido na página número 6
7. LED Display — LEDs display visual alerts, signal strength, and operation mode. 8. On-Off/Volume Control — Turns the power on and adjusts the Audio Alert volume. 9. Speaker — Sounds audio alert. There are four different audio alert tones to distinguish each type of signal received. When you become familiar with all the distinct alert tones, you can operate the LRD 2200SWS just by listening, devoting your full attention to the traffic in front of you. 6
Resumo do conteúdo contido na página número 7
X K Ka L SWS P 1 2 3 4 C M 1 2 34 56 89 7 1. X-Band Signal Indicator — A green LED lights and blinks to indicate the presence of an X-band radar signal. The blink rate increases as the radar source gets closer. A distinct audio alert is also heard. 2. K-Band Indicator — An amber (orange) LED lights and blinks to indicate the presence of a K-band radar. The blink rate increases as the radar source gets closer. A distinct audio alert is also heard. 3. Ka-SuperWideband Signal Indicator — A yell
Resumo do conteúdo contido na página número 8
Installation The LRD 2200SWS uses a highly sensitive horn-type antenna and IR laser sensor to receive radar/laser signals. Its sensitivity and range depend on the method of installation and the direction of the antenna/sensor in relation to the signal source. The inherent nature of radar waves makes them reflect off metallic surfaces. This is why these waves are so useful for measuring the speed of a vehicle. The IR laser light may reflect only from shiny surfaces. Both radar waves and IR laser
Resumo do conteúdo contido na página número 9
Adjusting the Windshield Mounting Clip 1. The metal portion of the bracket locks into the plastic portion at three different positions. These positions can be used for vehicles with different vertical angles of their windshields. The back position can be used for vehicles with windshields that are slanted back. 2. For optimum laser detection, bend the angled portion of the windshield mounting bracket so that the LRD 2200SWS is parallel to the road surface. Be sure the LRD 2200SWS is mounted so i
Resumo do conteúdo contido na página número 10
X MUTE Ka L SWS CITY K AUDIO P 2 3 1 4 M C Connecting the Power Direct Connection The LRD 2200SWS is designed to operate on most 12V DC negative ground vehicle electrical systems. The straight power cord provided with the unit has bare wires at one end, and a small connector at the other end. 1. Connect the positive wire to a 12V DC source in your vehicle’s fuse box. 2. Connect the other wire to ground. Fuse Box Note: The LRD 2200SWS is designed to operate only with 12V DC, negative ground power
Resumo do conteúdo contido na página número 11
X MUTE Ka L SWS CITY K AUDIO P 1 2 3 M 4 C 3. Run the power cord from the fuse box to the LRD 2200SWS. Your unit also comes with power cord mounting clips. You can use these clips to attach the power cord to the dashboard or other parts of the vehicle, keeping it neat and out of the way. Use the double-sided foam tape squares to attach each clip. Slip the power cord into the clip to hold it securely in place. Note: Ensure the cord does not interfere with vehicle operation or cause a tripping haz
Resumo do conteúdo contido na página número 12
When installing the power cord, make sure that: • The socket is clean to allow proper contact. • The power cord does not block the antenna area on the back of the unit. Your unit also comes with ten power cord mounting clips. You can use these clips to attach the power cord to the window frame or other parts of the vehicle, keeping it neat and out of the way. Use the double-sided foam tape squares to attach each clip. Slip the power cord into the clip to hold it securely in place. Replacing the
Resumo do conteúdo contido na página número 13
Operation You are now ready to enjoy the convenience and security of your LRD 2200SWS. Please read this section of the Operating Guide carefully to familiarize yourself with the basic operation of this unit. Power On Turn the Volume control to switch on the power. When you power up the LRD 2200SWS, it performs a self-test of all its circuits. This test takes about 5 seconds, during which you will hear the different alarm tones and see all the LEDs. First, you will hear the X-band alarm for 2 sec
Resumo do conteúdo contido na página número 14
Memory Retention Feature The Memory Retention Feature retains the LRD 2200SWS’s operational settings in memory for at least 2 days without power. When you turn on the LRD 2200SWS, it will be in the same mode as when you turned it off. Full Warning When the LRD 2200SWS detects a radar, laser, or safety warning signal, it emits a distinct warning tone and the corresponding alert LEDs (X, K, Ka, L, or SWS) will light and blink. The blink rate of the LEDs increases and the signal strength meter LEDs
Resumo do conteúdo contido na página número 15
Visual Alert Only Operation You can operate the LRD 2200SWS in Visual Alert Only by setting the Volume control at the minimum position in Full Alert Mode. At this setting you can barely hear the audio alert in a quiet environment. Be sure that the Audio Alert Only indicator is off. Auto Mute Operation Press the Mute button to activate the Auto Mute feature. CITY MUTE AUDIO When the Mute indicator is selected, the unit is in Auto Mute Mode. In this mode you hear the full audio alert when a signal
Resumo do conteúdo contido na página número 16
City Operation In highly populated areas, you may encounter many devices that use the same frequencies as radar signals, such as motion detectors, automatic doors, and intrusion alarms. These devices may trigger an alert called “falsing.” To filter most of the weaker signals and get the most accurate radar signal recognition, press CITY to turn on the City Mode. CITY MUTE AUDIO The City indicator lights. In City Mode, the combination of visual and audio alert tones varies based on the strength o
Resumo do conteúdo contido na página número 17
LED Signal Strength Meter in City Mode The LED signal strength meter gives you instant information about the strength of the signal being detected. A weak signal causes the first LED to light, but as signal strength increases, more LEDs light. All four LEDs light when full signal strength is received. Use this meter to judge the distance from the signal source. Signal Strength X-, K-, and Ka-Super Laser WideBand ●❍❍❍ Visual Visual/Audio ●●❍❍ Visual Visual/Audio ●●●❍ Visual/Audio Visual/Audio ●●●
Resumo do conteúdo contido na página número 18
Care and Maintenance The LRD 2200SWS is designed to give you years of trouble-free service. There are no user-serviceable parts inside, and, except for the fuse, no maintenance is required. To keep your detector in new condition, follow these important suggestions: • Never leave the LRD 2200SWS on the windshield when you park your vehicle. The temperature in the vehicle in summer can reach levels above what is considered to be safe for this unit. • To make you less susceptible to break-in and th
Resumo do conteúdo contido na página número 19
Troubleshooting If your LRD 2200SWS does not perform up to expectations, try the suggestions listed below. If you cannot get satisfactory results, call the Uniden Customer Service Center at (800) 297-1023, 8:00 a.m. to 5:00 p.m. Central Time, Monday through Friday. Unit does not operate: • Check the power cord. Be sure the connectors (Power LED not on) are properly installed. • Be sure ignition key is ON or in the accessory position. • Fuse out. Check and replace. • Check power to lighter socket
Resumo do conteúdo contido na página número 20
Specifications General 1 5 5 Dimensions: 3 ⁄ in. (W) x 4 ⁄ in. (D) x ⁄ in. (H) 9 8 6 Weight: 3.5 oz. Power Requirements: 13.8 VDC Temperature Range: Operating: -5°F to 160°F (-20°C to 70°C) Storage: -40°F to 185°F (-40°C to 85°C) 360° Laser Detector Receiver Type: Pulse Laser Signal Receiver Sensor Front End: Convex Condenser Lens Detector Type: Pulse Width Discriminator Receiver Bandwidth: 30 MHz Spectral Response: 800 - 1100 nm Alert Hold Time: 3 seconds Radar Detector Receiver Type: Double Co
