Resumo do conteúdo contido na página número 1
swisherinc.com
OWNER’S
MANUAL
MODEL NO.
LS722X
STARTING SERIAL #:
L206-010001
LOG
SPLITTER
Safety
IMPORTANT
Assembly
Read and follow all Safety
Precautions and Instructions
Operation
before operating this
equipment.
Service and Adjustment
Repair Parts
Rev. 06-010
1602 CORPORATE DRIVE, WARRENSBURG, MISSOURI 64093 PHONE 660-747-8183 Made In The
FAX 660-747-8650
USA
Manufacturing quality lawn care equipment since 1945
11624
Resumo do conteúdo contido na página número 2
LIMITED WARRANTY The manufacturer’s warranty to the original consumer purchaser is: This product is free from defects in materials and workmanship for a period of ONE (1) year from the date of purchase by the original consumer purchaser. We will repair or replace, at our discretion, parts found to be defective due to materials or workmanship. This warranty is subject to the following limitations and exclusions: 1) Engine Warranty All engines utilized on our products have a separate warran
Resumo do conteúdo contido na página número 3
SAFETY PRECAUTIONS This Safety Alert Symbol indicates important messages in this manual. When you see this symbol, carefully read the message that follows and be alert to the possibility of personal injury. Read this manual completely. This machine can amputate hands, feet, and throw objects. Failure to observe the following safety instructions could result in serious injury or death. WARNING: The engine exhaust from this product contains chemicals known to the s
Resumo do conteúdo contido na página número 4
• NEVER operate your splitter near a flame or spark. Hydraulic oil and gasoline are flammable and can explode. • NEVER fill gas tank while the engine is hot or running. Allow the engine to cool before refueling. • This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any).
Resumo do conteúdo contido na página número 5
ASSEMBLY This log splitter has been partially assembled at the factory. Refer to the drawings and part lists should it become necessary to disassemble the unit for repair or replacement of parts. Inspect all components for damage. If you believe you have a damaged part please contact customer service immediately at 1-800-222-8183. Exercise extreme caution, as parts are very heavy. Sufficient persons or mechanical handling WARNING: equipment should be used. Refer to uncrating a
Resumo do conteúdo contido na página número 6
POSITIONING THE CYLINDER 1. Remove lock pins from the cylinder retention clips and rotate clips down exposing the open slots on the cylinder retention bracket (reference Figure 2). 2. Slide the Cylinder forward until the rear trunnions clear the slots then lift the back side of the cylinder until the rear trunnions clear the cylinder retention bracket and slide cylinder back until the front cylinder trunnions slide into the open slots of the cylinder retention bracket (reference arrow in
Resumo do conteúdo contido na página número 7
WARNING: NEVER OPERATE THE SPLITTER WITH THE CYLINDER IN THE STORED POSITION. SPLITTER OPERATION 1. Set up the log splitter in a clear, level area and block the wheels. The suction port on the tank should always be on the lower side of the log splitter. 2. Place a log on the beam, against the foot plate. Make sure the log is securely on the foot plate and up against the beam. 3. Depress the valve lever so that the cylinder will drive the push block into the log. Extend the cylinde
Resumo do conteúdo contido na página número 8
MAINTENANCE AND STORAGE WARNING: DISCONNECT THE SPARK PLUG BEFORE PERFORMING ANY MAINTENANCE. Consult the operating and maintenance instructions of the engine manufacturer for engine care. Always check the oil level of the hydraulic reservoir before operation. Operating without an adequate oil supply will cause severe damage to the pump. Periodically check that all nuts, bolts, screws, clamps and fittings are tight and secure. To keep your splitter in top working condition perform
Resumo do conteúdo contido na página número 9
SAFETY DECALS Replace decals immediately if damaged. OD16 – FUEL SHUT OFF DECAL OD07 – COLD WEATHER DECAL (NOT ALL MODELS) OD12 – HYDRAULIC FILL PLUG 11794 – CAUTION DECAL DECAL OD33– SPEED DECAL 11427 – LS DANGER DECAL 9
Resumo do conteúdo contido na página número 10
ASSEMBLY DETAIL LS722X MODELS 10
Resumo do conteúdo contido na página número 11
SERVICE PARTS Please have Model and Serial Numbers ready when ordering parts. Color cannot be guaranteed upon service parts. ITEM NUMBER DESCRIPTION PART NUMBER 1 54" Return Hose 7290 2 48" Pressure Hose 7289 3 #12 Hose Clamp LS5001 4 Return Line Fitting 7329 5 Filter Head LS1112 6 Filter Element LS1113 7 3/4" NPT Filler Cap w/Hole 7379 8 Hydraulic Reservoir/Tank 11467TK 9 Bolt 3/8-16 X 3/4 Serr Flange NB780 10 Nut 3/8-16 Serr Flange NB779 11 Bolt 5/16-18 X 3/4 Serr Flange NB596 12 Nut 5/16-18 S
Resumo do conteúdo contido na página número 12
BEAM DETAIL ITEM NUMBER DESCRIPTION PART NUMBER 1 Beam Weldment 11468TK 2 Wedge Weldment 11910TK 3 Wedge GIB Angle 11857TK 4 Bolt 3/8-16 X 1 1/4 Carriage 10501 5 Nut 3/8-16 Nyloc NB182 6 Nut 1/2-13 Nyloc Jam NB121 7 1/2-13 X 3 1/2 GR5 ZP NB577 8 Ram Cylinder 11242TK 9 2-Way Pipe Nipple 7292 10 Hydraulic Fitting 7291 11 Stationary Line Assembly 7288TK 12 Valve Inlet Fitting 7387 13 Valve Control 7287TK 14 Return Line Fitting 7329 15 Master Chain Link 7424 16 Valve Control Handle 7423 17 Handle Gr
Resumo do conteúdo contido na página número 13
PIVOT DETAIL Hydraulic Hoses Not Shown for Clarity ITEM # DESCRIPTION PART # 1 Beam Pivot Weldment 11469TK 2 Bolt 3/4-10 X 2 GR8 11431 3 Washer Belleville 1.50 OD X .761 ID X .098 X .134 AS155 4 Washer 3/4 SAE NB146 5 Nut 3/4-10 Nyloc NB609 6 Bolt 1/2-13 X 4 GR5 NB132 7 Nut 1/2-13 Nyloc NB281 8 1/2 X 3 1/2 HITCH PIN W/ HAIR PIN NB648 9 3/8 X 1 5/8 Ball Lok Pin 11397 10 Plastic Lanyard NB652 11 1/4-20 X 3/4 Serrated Flange Bolt GR5 NB690 1 2 3 4 ENGINE DETAIL 5 6 4 ITEM # DESCRIPTION PART # 1 E
Resumo do conteúdo contido na página número 14
NOTES: ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ___________________________________________________________________
Resumo do conteúdo contido na página número 15
SPECIFICATIONS Models LS722X Splitting 22 Tons Force 7 HP Briggs and Engine Stratton Intek Splitting Horizontal/Vertical Positions Cylinder 4" X 24" Size 2 Stage with Heavy Pump Duty Bearings 11 Gallons Per Pump Minute Specs Auto Return Valve Belt Drive with Drive Clutch for Easy System Starting Hydraulic 16-17 Quarts Fluid Capacity Maximum 25" Log length 13.00 X 5.00 Tire Specs Metal No Fenders No Ball Hitch Unit 410 Lbs Weight 15
Resumo do conteúdo contido na página número 16
LOG SPLITTER OWNER’S MANUAL HOW TO ORDER REPAIR PARTS: Each Log Splitter has its own serial number. Each engine has its own serial number. The serial number for the Log Splitter will be found on the right hand side of the hydraulic oil reservoir. The serial number for the engine will be found on the top of the blower fan housing. All Log Splitter parts listed herein may be ordered directly from Swisher Mower & Machine Co. Inc., your nearest Swisher dealer, or from our website. MODEL NO
