Resumo do conteúdo contido na página número 1
Resumo do conteúdo contido na página número 2
Table of Contents Important Safety Instructions .............................................. 2-3 Introduction .............................................................................. 4 Controls and connections ................................................... 5-8 Display icons…………………..................……………………9 Using the Radio for the First time ........................................ 10 Operating your radio – Search tuning AM/FM ................... 11 Manual tuning – AM/FM ...........
Resumo do conteúdo contido na página número 3
Important Safety Instructions 9. Power sources: The radio should be operated only from the type of 1. Read and understand all safety and operating instructions before the power source indicated on the marking label. If you are not sure of radio is operated. the type of power supply to your home, consult your radio dealer or GB power company. 2. Retain instruction: The safety and operating instructions should be retained for further reference. 10. Mains adaptor: The mains ada
Resumo do conteúdo contido na página número 4
14. Do not attempt to service the radio yourself. Removing the cover may expose you to dangerous voltage, and will void the warranty. Refer all servicing to authorized service personnel. 15. Object and Liquid Entry-Never push objects of any kind into this radio through opening as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind of product. 16. The appliance should be serviced by
Resumo do conteúdo contido na página número 5
Introduction The Sangean K-200 AM/FM RDS Digital Tuning Radio provides the following range of features in a stream-lined portable size: GB Radio for AM and FM (with RDS) broadcasts. Built-in AM antenna and external FM wire spring aerial for radio reception. 10 radio station presets (5 for AM and 5 for FM) Clock display with time when in standby. Two alarm timers with snooze feature to wake you to either buzzer, radio alarm, or voice messages. Adjustable Auto Off Timer which can be set to turn th
Resumo do conteúdo contido na página número 6
Controls and connections 1. Backlight button 7. Egg Timer button 2. RDS button 8. Message 2 button 3. Standby / Auto off 9. Message 1 button 4. Alarm 2 button 10. CT (auto clock time) button 5. Band button 11. Alarm 1 button 6. Station presets 5
Resumo do conteúdo contido na página número 7
Controls and connections GB 12. Built-in Microphone 14. Tuning control knob 13. LCD display 15. Volume control knob 6
Resumo do conteúdo contido na página número 8
Controls and connections 16. Battery compartment 19. Aux in socket 17. Headphone socket 20. FM Antenna jack 18. AC in socket 7
Resumo do conteúdo contido na página número 9
Controls and connections GB 21. Buzzer level control 8
Resumo do conteúdo contido na página número 10
Display icons A. Battery capacity indicator C B. PM display C. Time indicator D. RDS icon E. Signal bar F. CT icon G. Alarm 2 indicator H. Alarm 1 indicator I. Frequency display J. Timer icon 9
Resumo do conteúdo contido na página número 11
Using the radio for the first time A. AC operation B. Battery operation 1. Place your radio on a flat surface. 1. Turn the unit upside down. Locate the battery compartment door tab, 2. Insert the adaptor plug into the AC socket located on the back of your press down on the door tab and lift the cover up to open. GB radio ensuring that the plug is pushed fully into the socket. 2. Insert 4 x “C” size/UM-2/R14 batteries. Be sure to follow the 3. Plug the other end of the adaptor into the wal
Resumo do conteúdo contido na página número 12
Operating your radio – Search tuning AM/FM 1. Press the Standby button to switch on your radio. 2. Press the Band button as needed until the AM or FM band is selected. 3. Press and release the Tuning knob to carry out an auto-tune. Your radio will scan up the AM/FM band from the currently displayed frequency and will stop scanning automatically when it finds a station of sufficient strength. 2 4. The display will show the frequency of the signal found. If the signal is strong
Resumo do conteúdo contido na página número 13
Manual tuning – AM/FM 1. Press the Standby button to switch on your radio. 2. Press and release the Band button to select AM or FM radio mode. GB 3. Rotate the Tuning control to tune to a station. The FM frequency will change in steps of 200kHz (American version) / 100kHz (European version) and AM frequency will change in steps of 10kHz (American version) / 9kHz (European version). 2 4. When the end of the waveband is reached your radio will recommence tuning from the opposite en
Resumo do conteúdo contido na página número 14
Setting up the tuning step increment 1. Make sure your radio is in power off mode. 2. Press and hold the Tuning control knob until the setting of time 2-4 format begins to flash. 3. After setting up the time format, press and release the Tuning control to enter the step increment setting. 4. Rotate the Tuning control knob to select either 100kHz or 200kHz for FM radio, and or 9kHz/10kHz for AM radio. Then press and release the Tuning control to confirm the setting. 13
Resumo do conteúdo contido na página número 15
Display modes – FM Your radio has a range of display options for FM radio mode. 1. Repeatedly press and release the RDS button to view the RDS GB information of the station you are listening to. a. Station name Displays the name of the station being listened to. b. Program type Displays the type of station being listened to such as Pop, Classic, News, etc. c. Radio text Displays radio text messages such as new items etc. d. Frequency Displays the frequency of the FM for the station listened
Resumo do conteúdo contido na página número 16
Presetting stations in AM/FM modes There are 5 preset stations each for AM and FM radio. They are used in the same way for each waveband. 1. Press the Standby button to switch on your radio. 2. Press the Band button to select the desired waveband. Tune to the required radio station as previously described. 3. Press and hold the required main Preset button (1 to 5) until the display shows “P1” after the frequency. The station will be stored using the preset number. Repeat this procedu
Resumo do conteúdo contido na página número 17
Clock and Alarms Setting the time format The clock display used in stand-by mode and on the playing mode screens can be set to 12 or 24 hour format. The selected format is then GB also used when setting the alarms. 1. Make sure your radio is in power off mode. 2. Press and hold the Tuning control knob until the radio beeps twice and the setting of time format begins to flash. 2,3 3. Rotate the Tuning control to select either 12 or 24 hour format. Press and release the Tuning control to c
Resumo do conteúdo contido na página número 18
Setting the clock time manually 1. Press the Standby button to switch on your radio. 2. Press and hold the CT button until the radio beeps once to enter the clock time setting, and the hour setting will begin to flash. The display will show “CLOCKSET”. 3. Rotate the Tuning control to select the desired hour, and press and release the Tuning control to confirm the setting. Then rotate the Tuning control to select the desired minute, and press and release the Tuning control to
Resumo do conteúdo contido na página número 19
Setting the clock time using RDS CT 1. Tuning to a station transmitting RDS data, and press and release the CT button. The LCD display will show . The clock time of the radio will set up automatically according to the RDS data received. GB 2. When the action is completed, will appear on the LCD display indicating the radio time is RDS clock time. The radio clock time will be valid for seventy two hours each time the radio time is synchronized with RDS CT. 3. Whe
Resumo do conteúdo contido na página número 20
Setting the alarm clock Your K-200 radio has two alarms which can each be set to wake you to AM/FM radio, buzzer alarm or voice messages. The alarms may be set while the unit is in standby mode or while playing. 1. Before setting an alarm ensure that the clock time is set. Press and hold the Alarm 1 button to enter the alarm 1 setting. 2. The hour setting of alarm 1 will begin to flash. Rotate the Tuning control to select the required alarm hour, and press and release the Tuning cont
