Manual do usuário INSTEON 2452-522

Resumo do conteúdo contido na página número 1

Quick Start Guide
®
INSTEON DIN Rail Dimmer
Sense #2
Sense #1
Connected
Models: 2452-222, 2452-422, 2452-522
load
Tools Needed
• Slotted #1 screwdriver • Voltage meter
• Wire cutter/stripper
LED
Paddle top
Installing INSTEON DIN Rail
(on/brighten)
Installation should only be performed by a qualified electrician or a homeowner
Fuse
who is familiar and comfortable with electrical circuitry. If you have questions,
consult an electrician or call the INSTEON Support Line at 866

Resumo do conteúdo contido na página número 2

d) Perform the step that applies • For single momentary: slowly tap set button four times LED will continue blinking green • For dual momentary: slowly tap set button five times LED will start double-blinking green • To switch back to latching: slowly tap set button six times LED will start blinking green e) Once the mode is selected, press and hold set button until it double-beeps LED will stop blinking and turn green if load is on or red if load is off Make DIN Rail a Responder C