Manual do usuário Human Touch Perfect Chair

Resumo do conteúdo contido na página número 1

June 5, 2009
REPLACING THE FOOTREST ROD
*PC-085 shown
PC-075/085/095
SERVICE LEVEL: 2
Tools Required: 4 mm (5/32") Allen Key (provided), 10-mm wrench
SAVE ALL REMOVED PARTS FOR USE DURING REASSEMBLY
(Fig.1)
Footrest rod assembled
GET READY
1. Gently tip the chair on its back (Fig.1).
REMOVING THE FOOTREST ROD
1. Using a 10-mm wrench, turn the metal footrest rod nut
counter-clockwise to detach the rod from the spacer barrel,

Spacer barrel
then remove the rod from the chair frame.
2. Us

Resumo do conteúdo contido na página número 2

INSTALLING THE NEW FOOTREST ROD Screw 1. Remove the screw from the top of the black plastic spacer barrel (Fig.3). 2. Align the spacer barrel with the corresponding hole on the bracket, then secure it using the screw Bracket you removed in the previous step and the 4 mm (5/32") Allen Key (Fig.4). 3. From below the chair frame, insert the metal rod through the corresponding hole in the chair Spacer barrel frame then into the black spacer barrel (Fig.4). 4. Turn the metal rod clockwise by