Resumo do conteúdo contido na página número 1
Model XPMT1
PRO
Mini Timer
Owner's Manual
Resumo do conteúdo contido na página número 2
Contents Introduction The X10 PRO Mini Timer controls up to 8 X10 PRO Modules automatically or instantly. Introduction ................................................................................................... 3 You can have your outside lights as well as inside lights and appliances go on and off at Quick Tour ...................................................................................................... 5 preset times to give your home a lived-in look while you are away. How to
Resumo do conteúdo contido na página número 3
Introduction Quick Tour Let’s quickly review the functions of each part of the keyboard (you can go to page 7 for How it works a step by step tutorial if you prefer). Referring to the diagram below and the cutaway The Mini Timer plugs into any AC outlet in your home and transmits digitally encoded sections that follow you will see that the keyboard on the Mini Timer consists of 7 basic signals over your house wiring instantly or at the times you set. These signals are areas. received by the X10
Resumo do conteúdo contido na página número 4
Quick Tour Setting up the Mini Timer How to Program a timed event Setting the clock 1. Place the mode switch in “Prog Set/Review” position. Plug the Mini Timer into any convenient AC outlet. Fit two AA alkaline batteries in the battery compartment to protect the time and program for up to 48 hours in the event of a 2. Advance to the desired time. power outage. If the battery is low, dead, or not installed, the low battery indicator will 3. Set the 1-4/5-8 switch to the desired position. show in
Resumo do conteúdo contido na página número 5
Setting up the Mini Timer Programming ON and OFF times Setting something to happen every day at the same time. Setting a timed event to occur Once only After you have installed all of your Modules and checked that they are working instantly If (within 4 seconds after setting an On or Off time) you press the “Mode” button once or from the Mini Timer you are ready to program timed events. twice until Once shows in the display, you will modify the program for that particular Unit Code to occur only
Resumo do conteúdo contido na página número 6
Programming ON and OFF times Programming ON and OFF times If the display shows FULL Reviewing timer events If FULL is displayed when you try to enter a programmed time, this means that you have Set the Mode Switch in the “Prog Set/Review” position. If no events exist in memory 0:00 tried to enter an additional time when you have already used up all the available is displayed, otherwise the first event found in memory is displayed. memory. Cancel one or more of your set times by pressing a number
Resumo do conteúdo contido na página número 7
Alarm settings Alarm settings Setting the Alarm Buzzer Suspending the wake up function With the “Wake” switch in the “ON” position, any program you set for Module If you set channel 1 for an On time of 7:00 AM and number 1 is your bedside lamp, at number 1 will also set the internal alarm buzzer. 7:00 AM every day, your bedside lamp will turn on and the internal buzzer will sound. If you turn the Buzzer switch off on Friday nights the buzzer will not wake you up the next A bell icon will show i
Resumo do conteúdo contido na página número 8
Setting up the Lamp Module Setting up the Appliance Module Setting The Lamp Module’s Code UNIT CODE Setting The Appliance Module’s UNIT CODE DIAL DIAL (modules sold separately) Code (modules sold separately) 1 1 15 3 15 3 Using a small screwdriver, set the red House Using a small screwdriver, set the red House 13 5 13 5 11 7 Code dial to the same letter as your Mini Code dial to the same letter as your Mini 11 7 9 9 Timer. Set the Black Unit Code dial to any Timer. Set the Black Unit Code dial t
Resumo do conteúdo contido na página número 9
Troubleshooting Accessories 1. If a particular Module won’t go on or off from the buttons on the Mini Timer: Check that you have power to the outlet controlling the Module and the switch on the light or appliance is ON. ON OFF 1 Check that the Unit Code and Housecode on the Module are set correctly. 2 1 A 3 Try plugging the Module and the Mini Timer into the same outlet. If the Module doesn’t 13 5 M E 9 I work in ANY outlet, not even with the Module and the Mini Timer in the same duplex 4 rece
Resumo do conteúdo contido na página número 10
WARRANTY NOTES X10 PRO (X10) warrants X10 products to be free from defective material and workmanship for a period of two (2) years from the original date of purchase at retail. X10 agrees to repair or replace, at its sole discretion, a defective X10 product if returned to X10 within the warranty period and with proof of purchase. If service is required under this warranty: Call 800-411-2888, or visit www.x10pro.com. 18 19
Resumo do conteúdo contido na página número 11
X10 PRO, North Las Vegas, NV 89032 XPMT1-7/06 www.x10pro.com Made in China
