Resumo do conteúdo contido na página número 1
®
Product features may vary from the picture above.
Harley-Davidson is a registered trademark and the motorcycle sound is a trademark of H-D Michigan, Inc. used under license.
Owner’s Manual with Assembly Instructions
Please read this manual and save it with your original sales receipt.
For Model 74370
Tools needed for assembly: Phillips Screwdriver, Hammer and Safety Scissors (not included).
®
Use only with two Power Wheels 6 Volt Rechargeable Batteries with A-Style Connectors and Built-in Ther
Resumo do conteúdo contido na página número 2
Table of Contents A Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 B Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 C Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumo do conteúdo contido na página número 3
Warnings and Cautions B ELECTRICAL HAZARD WARNING • Batteries can fall out and injure a child if vehicle tips over. Always use battery clamp. • PREVENT FIRE - Never modify the electrical system. Alterations could cause a fire resulting in serious injury and could also ruin the electrical system. - Use of the wrong type battery or charger could cause a fire or explosion resulting in serious injury. ® ® - Use of Power Wheels components in products other than Power Wheels vehicles could cause ov
Resumo do conteúdo contido na página número 4
Parts C • If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. • Metal parts have been coated with a lubricant to protect them during shipment. Wipe all metal parts with a paper towel to remove any excess lubricant. Wheel - 2 Vehicle Frame Wheel Axle - 2 Fork A
Resumo do conteúdo contido na página número 5
Parts Exhaust Pipe Set Left - Inner Half Right - Inner Half Right - Outer Half Left - Outer Half Front Fork Headlight - Rear Half Headlight - Front Half Seat Saddlebag - 2 Gas Tank Soundbox Battery Clamp Fork Cover 5
Resumo do conteúdo contido na página número 6
WARNING • D o nPREVE o t b y p a sNT FIRE s a P o w e r W h e e l • U s e o n ly a R e d P o w e r W h e el s • OR OPERA N e v e r m o d if yT th E e e le c t ri c a l Parts (Inner Half) (Outer Half) Right Left Shock Set - 2 Handlebar Set 6 Volt Battery - 2 Hex Bushing - 4 Axle Bushing - 2 Round Bushing - 2 Handgrips - 2 12-Volt Charger Not Shown: Label Sheet 3 #8 x /4" Plastite Screw – 55 .437 (Large Diameter) Retainer - 6* .354 (Small Diameter) Retainer - 3* All Shown Actual Size *For your con
Resumo do conteúdo contido na página número 7
T M Parts Diagram D 3 17 20 13 Note: Some parts shown are assembled on both sides of the vehicle. 28 5 2 4 29 24 15 16 19 11 23 18 31 14 9 10 30 12 25 4 14 21 7 8 29 22 11 6 26 1 27 12 30 1. Vehicle Frame 13. Saddlebag - 2 25. Fender 2. Vehicle Body 14. Steering Bushing - 2 26. Shock - Inner Half - 2 3. Seat 15 Headlight - Front Half 27. Shock - Outer Half - 2 4. Wheel - 2 16. Headlight - Rear Half 28. 12 Volt Charger 5. Gas Tank 17. Handlebar - 2 29. .354 Retainer - 2 6. Footboard 18. Sound B
Resumo do conteúdo contido na página número 8
Battery Charging E Important Notes ELECTRICAL HAZARD • Your new batteries must be charged for at least 18 hours before you use them in your vehicle for WARNING the first time. • We recommend that you start charging your batteries before beginning assembly of your new vehicle. • Batteries can fall out and injure a child if vehicle tips over. Always use • The batteries must be upright while charging. battery clamp. • The charger is not a toy. • PREVENT FIRE • Do not short circuit the batteries.
Resumo do conteúdo contido na página número 9
WARNING P RE VEN T F IRE • D o not b ypass a P o w e r Wheel • Use only a R ed P ow e r W h e els • N ev er modify the e lectr ical O R O PE R A TE WARNING P R E V EN T F IRE • Do not b ypass a P o w e r Wheel • U se only a Red P o w er Wheels WARNING • Ne v er modify the electr i cal O R O P ER AT E PR EV EN T F IR E • Do not b • Use only ypass a P a Red P ow o wer Wheels e r Wheel • Ne v er modify the electr ical O R O PE RA T E WARNING PR EV E NT FIR E • Do not b ypass a P o w er Wheel • Use
Resumo do conteúdo contido na página número 10
Assembly F WARNING Children can be harmed by small parts, sharp edges and sharp points in the vehicle’s unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery, or help in assembly of the vehicle. Rectangular Opening Narrow 3 1 Rectangular Opening Vehicle Square Body Motor Harness Opening Connectors High Speed Motor Hook-Up Harness Connectors Motor Harness Connectors Retainer Tabs Rear of T
Resumo do conteúdo contido na página número 11
TM TM TM TM Assembly 7 5 Right Exhaust Pipe - Inner Half * Right Footboard Vehicle Vehicle Frame Frame • The right footboard was inserted in the vehicle frame at Helpful Hint: Use a long-shafted screwdriver to complete the factory. Make sure the right footboard is in place. assembly steps 7 and 8. • Insert two screws into the right footboard as shown. • Align the holes in the inner half of the right exhaust pipe • Tighten the screws with a Phillips screwdriver. Do not with the holes in the vehic
Resumo do conteúdo contido na página número 12
T M Assembly Flat Side Right 9 11 Exhaust Pipe Wheel Axle Axle Bushing • Slide an axle bushing (flat side first) on a wheel axle. 12 1 1 Guide Wheel Guide Guide Guide • With the holes aligned, insert six screws to join the 3 two halves of the right exhaust pipe. 3 • Tighten the screws using a Phillips screwdriver. Do not over-tighten. 4 4 • Repeat steps 6 through 9 to assemble the left exhaust pipe (L) to the left side of the vehicle. 10 2 2 • Before applying labels to the wheels, wipe each whe
Resumo do conteúdo contido na página número 13
TM Assembly Vehicle Frame Saddlebag 16 14 Axle Notch Bushing Tab Groove Rear Rear Fork Fork Arm Arm Wheel (with Back View Hex Busings) • Lift the pretend buckles on a saddlebag to open the saddle bag. Back View • Fit the tab on the back surface of the saddlebag into the notch on one side of the rear fender. • Position the vehicle assembly so that the back is facing you. • Insert three screws through the holes on the inside of the saddlebag. • While holding the hex bushings in place, position th
Resumo do conteúdo contido na página número 14
TM Assembly 20 18a Headlight Assembly - Rear Half DO NOT DO NOT Fork Axle INSERT INSERT SCREW SCREW HERE HERE .354 (Small Diameter) Headlight Retainer Assembly - Front Half “Lens” 18b • Place a .354 (small diameter) retainer on a flat surface, inside up. • Fit the end of the fork axle into the retainer. • Tap the opposite end of the fork axle with a hammer to secure the retainer on the axle. Pull on the retainer to make sure it is securely assembled. • Fit the two halves of the headlight assembl
Resumo do conteúdo contido na página número 15
TM TM Assembly .354 (Small Diameter) 24 22 Retainer Front Fork Right Handlebar Left Handlebar Front Fork 2 1 Fork Axle • Slide the fork axle up into the bottom of the front fork, through the neck and steering stop, and out the top of the front fork. • Fit a .354 (small diameter) retainer on the end of the fork axle. • Slide the right and left handlebars through the holes in • Support the fork axle and tap the retainer with a hammer the front fork. to secure it on the end of the axle. • Align th
Resumo do conteúdo contido na página número 16
Assembly handlebar making sure that the tab on the inner shock Arrow half fits into the groove in the fender. Front 25 • Repeat this procedure to slide the remaining shock on Fender the other handlebar. Round Wheel Bushing 27 Axle .437 (Large Diameter) Handlebar Handlebar Retainer Shock Tabs Tabs Barrel Side Front Fork Round Bushing • Position the vehicle upside down. • Note the arrow on the underside of the front fender. • Being careful to keep the shocks correctly positioned, align the hole in
Resumo do conteúdo contido na página número 17
Assembly Round Battery Bushing Wheel Compartment 29 31 Axle Door Battery Compartment .437 (Large Diameter) Retainer Plate Side Sound Box Shock 1.5V x 3 Round Bushing “AA” (LR6) • Fit a round bushing, plate side first, between the wheel and the shock. SHOWN ACTUAL SIZE Helpful Hint: You may need to push the shock outward slightly to fit the round bushing. • Loosen the screw in the sound box battery compartment • Continue to slide the wheel axle through the round door using a Phillips screwdriver
Resumo do conteúdo contido na página número 18
Assembly Helpful Hint! To replace the batteries in the sound box, simply remove the screws from the gas tank and remove the gas tank from the vehicle frame. After replacing the 32 batteries, be sure to replace the sound box, gas tank Buttons and screws. Gas Tank Sound Box 34 PUSH HERE Tabs Tab Vehicle Body Seat Gas Tank Tab Slot Vehicle Frame • Balance the sound box on the vehicle body. (The speaker should face down.) • Fit the tabs at the bottom of the gas tank under the front end of the vehic
Resumo do conteúdo contido na página número 19
Label Decoration G Proper label application will help to keep the labels looking their best! When applying labels, keep the following guidelines in mind: • Wash your hands before applying the labels. • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils. • Place the labels exactly as shown in the illustrations. • For best results, avoid repositioning a label once it has been applied to the vehicle. • After applying a label, rub the label
Resumo do conteúdo contido na página número 20
TM Label Decoration 23 4 ® 21 27 27 29 30 28 ® 15 10 ® 25 ® 25 Right Side 24 24 ® 5 23 22 27 27 28 30 29 ® ® 16 Left Side 25 25 24 24 20 TM ® ®
