Manual do usuário Harbor Freight Tools 91092

Resumo do conteúdo contido na página número 1

ADIRONDACK ROCKER
91092
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
®
Copyright © 2004 by Harbor Freight Tools . All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353

Resumo do conteúdo contido na página número 2

Specifications Comfortable Natural Fir Wood Adirondack Rocking Chair Overall Dimension 29-1/2”L x 37”W x 36-1/4”H Back Seat Height 8-3/4” Seat Area 19”D x 20”W Back Slat Length 32” Arm Rest 30-7/8”L x 4-1/2”W Front Seat Height 11-1/2” Back Rest 30-1/2”L x 17-3/8”W Net Weight 22 Lbs. Rocker 37”L Weight Capacity 250 Lbs. Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and d

Resumo do conteúdo contido na página número 3

7. Stay alert. Watch what you are doing, use common sense during assembly, and use of this chair. 8. Use eye and ear protection. Always wear ANSI approved impact safety goggles during assembly. 9. Take caution as some woods contain preservatives such as copper chromium arsenate (CCA) which can be toxic. When handling these materials extra care should be taken to avoid inhalation and minimize skin contact. 10. Check for damaged parts. Before using this chair, any part that appears damaged shou

Resumo do conteúdo contido na página número 4

Assembly Drawing D D C1 B F L Step 2 I Step 1 Attach the front end of B to C1 & C2 Attach F (right and left) with C1 and C2. F using 4 bolts, washers and nuts (I). Attach with 6 bolts, washers and nuts (I). D (right and left) to B (seat, back end) and F using 4 bolts, washers and nuts (L). G A Step 3 Step 4 Connecting G with the back of A, using Attach A with D & G, using 4 screws (H). 2 bolts, washers & nuts (K). Attach A with B, using 2 screws (H). C2 C1 Step 5 Attach E1 and E2 to D, using 2 b

Resumo do conteúdo contido na página número 5

Maintenance 1. This chair is made of natural Fir wood. This beautiful material will naturally weather over time, especially if used outdoors. You can manage the speed and extent of this weathering by controlling the environment in which the chair is used and stored, as well as any coatings you may apply. 2. Leaving the chair outside exposed to weather, especially direct sun, rain and salt air, will speed the weathering process. This can be slowed by removing the chair from these conditions, or c

Resumo do conteúdo contido na página número 6

Parts List Back Seat Left Front Leg Right Front Leg Back Support Left Arm Right Arm Rocker Back Brace Screw 55mm Bolt 65mm Bolt with Washer and Nut with Washer and Nut 50mm Bolt 80mm Bolt with Washer and Nut with Washer and Nut NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR H