Resumo do conteúdo contido na página número 1
model t21347
18 gauge 2" nailer Kit
oWner's manual
Copyright © MArCh, 2009 By grizzly industriAl, inC.
Warning: no portion of this manual may be reproduced in any shape
or form Without the Written approval of grizzly industrial, inc.
#ts11625 printed in ChinA
Resumo do conteúdo contido na página número 2
safety for your own safety read instruction manual before operating this equipment the purpose of safety symbols is to attract your attention to possible hazard- ous conditions. this manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. the progression of symbols is described below. remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures. indic
Resumo do conteúdo contido na página número 3
safety instructions f or pneumatic t ools 10. use proper air hose for the 17. disconnect tools before ser- tool. Make sure your air hose is in vicing, changing accessories, or good condition and is long enough to moving to another location. reach your work without stretching. 18. do not overreach . Keep proper footing and balance at all 11. Wear proper apparel. do not times. wear loose clothing, gloves, neck- ties, rings, bracelets, or other jew- 19. use the recommended elry which may get
Resumo do conteúdo contido na página número 4
additional safety instructions for nailers/ staplers 1. hand in Juries: d o not place 6. hose usage: Make sure your air your hands near the nail/staple point hose is designed for the tool in use, is of entry. A nail/staple can deflect in good condition, and is long enough and tear through the surface of the to reach your work without stretching. workpiece, puncturing your hand or however, an overly long air hose in fingers. the work area may be a tripping haz- 2. combustible gases: never co
Resumo do conteúdo contido na página número 5
never point this nailer at yourself or another person! always pay attention to the direction this nailer is pointed. use this tool with respect and caution to lessen the possibility of operator or bystander injury. ignoring this warning may result in serious personal injury. read the manual before operation. become familiar with this nailer, its nailer/stapler accidents routinely hap- safety instructions, and its operation pen while moving the gun to another location, such as up ladders
Resumo do conteúdo contido na página número 6
introduction foreword contact info We are proud to offer the g rizzly Model if you have any comments regarding this t 21347 2" n ailer Kit. t his model is part manual, please write to us at the following of a growing g rizzly family of fine pneu- address: matic tools. When used according to the guidelines set forth in this manual, you grizzly industrial, inc. can expect years of trouble-free, enjoyable C/o technical documentation Manager operation and proof of g rizzly’s commit- p.o. Box 206
Resumo do conteúdo contido na página número 7
set up unpacking inventory your Model t 21347 left our warehouse in After you open the nailer box, you should a carefully packed box. if you discover the find the following. nailer is damaged after you have signed for delivery, please immediately call Customer model t21347 inventory (figure 1) Service at (570) 546-9663 for advice. a. nailer .................................................. 1 b. safety goggles ................................. 1 s ave the containers and all packing mate- c.
Resumo do conteúdo contido na página número 8
c ompressed a ir system t he Model t 21347 is designed to be oper- ated at 60–100 psi using clean, dry, regu - lated, compressed air. do not exceed the maximum operating pressure for your model. Before using your new nailer, regulate the air pressure on your air compressor to the minimum psi for your model. exceeding the maximum permissible operating pressure may cause the An in-line filter/lubricator/regulator unit, nailer to explode, blowing metal frag- depicted in f igure 2, can be ins
Resumo do conteúdo contido na página número 9
5. Without pressing the trigger, depress safety nose the safety nose mechanism against a mechanism scrap piece of wood that is clean and free of any knots, nails, or other foreign objects. A safety mechanism on the nose of the nailer protects against accidental firing. — if the nailer does not fire, then the When the trigger is pressed, the nailer will safety nose mechanism is working not fire until the safety nose mechanism is correctly. depressed. — if the nailer does fire when yo
Resumo do conteúdo contido na página número 10
operations l oading When replacing nails in your Model t 21347, follow these guidelines: g auge: 18 5 l ength: ⁄8"–2" Capacity: 100 figure 4. loading nails into magazine. t o load your nailer: 4. slide the nails all the way down to the 1. dis Conne Ct n Ailer Fro M the nose of the nailer. Air supply! 5. push the magazine pusher all the way 2. s liding magazine pusher back, as in until the catch lever locks. shown in figure 3, to lock the catch lever in place. o perating if you have not rea
Resumo do conteúdo contido na página número 11
3. depress the safety nose mechanism a djusting depth against your workpiece. 4. Before pulling the trigger, make sure A depth adjustment knob is attached to the your free hand and other body parts nose for setting the nail depth. are positioned out of the way of a potential path of a nail in case of deflec- t o adjust the depth: tion. 1. dis Conne Ct n Ailer Fro M the d eflection is caused when grain Air supply! irregularities, knots or foreign objects inside the wood cause the nai
Resumo do conteúdo contido na página número 12
4. o pen the nailer nose by removing the c learing Jammed rubber nose tip, depressing the nose nails release mechanism, and opening the nose cover as shown in figure 7. A jammed nail must be cleared before using nose release Clip the nailer again. to clear a jammed nail from the dis- charge area: nose tip 1. disConneCt nAiler FroM the Air supply! nose Cover 2. r elease the catch lever and slide the figure 7. nose opened to clear a jam. magazine pusher back. 5. d islodge the jammed nail
Resumo do conteúdo contido na página número 13
4. open the nose cover as if to clear a r eplacing pistons & jammed nail. o -r ings 5. Watch the discharge area and push the top of the piston with your finger. you if you use your nailer day in and day out, will see the piston shaft slide down the repair pistons are cheap insurance against discharge area. wasted down time and lost profits, in the event that a piston or piston shaft becomes 6. With a long flathead screwdriver or sim- worn out. t he piston & o -r ing r epair Kit, ilarl
Resumo do conteúdo contido na página número 14
cleaning & lubrication c leaning l ubricating u se a good solvent to clean the nose s pecial oil has been included with your assembly of the nailer. Always be sure that new g rizzly nailer to help maintain its use- the nailer is dry before using it again. ful life. place two to six drops of oil in the nailer air inlet (as shown in f igure 8) every d o not allow dust, chips, sand, etc. into 2 hours of continuous use. the air connectors or into the body of the nailer; this may result in l
Resumo do conteúdo contido na página número 15
troubleshooting symptom possible cause solution Air leaking at 1. o-rings in trigger valve hous- 1. o-rings must be replaced & trigger valve ing are damaged. operation of safety nose must area. be checked. Air leaking 1. loose screws in housing. 1. tighten screws. between hous- 2. damaged o-ring. 2. replace o-ring. ing and hose. 3. loose air fitting. 3. tighten air fitting & use teflon tape. Air leaking 1. damaged seal. 1. replace damaged seals. between hous- ing and cap assembly. tool skips
Resumo do conteúdo contido na página número 16
main breakdown -14- t21347 2" nailer Kit 1 81 88 2 15 3 77 4 89 82 16 75 90 5 80 36 17 78 6 79 23 87 76 37 Piston & O-Ring 18 24 25 38 Repair Kit 74 39 73 (Not Included) 19 25 26 40 7 27 12 41 28 29 72 42 84 8 1 43 9 20 70 30 44 31 10 45 85 68 67 32 86 69 7 46 33 11 71 83 66 34 65 12 12 48 47 52 64 13 63 21 35 14 50 53 56 22 49 51 54 57 62 55 61 58 60 59
Resumo do conteúdo contido na página número 17
main parts l ist REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PT21347001 STEEL BALL 2.5MM 46 PSB38M CAP SCREW M5-.8 X 25 2 PT21347002 COMPRESSION SPRING 47 PT21347047 SHAFT RETAINER 3 PT21347003 AIR DEFLECTOR BOLT 48 PT21347048 SHAFT 4 PT21347004 AIR DEFLECTOR SPRING 49 PSB16M CAP SCREW M4-.7 X 16 5 PT21347005 AIR DEFLECTOR 50 PT21347050 LATCH 6 PSB15M CAP SCREW M5-.8 X 20 51 PT21347051 DRIVER PLATE 7 PLW01M LOCK WASHER 5MM 52 PEC16M E-CLIP 2.5MM 8 PT21347008 CYLINDER COVER 53 PT21347053 SPEC
Resumo do conteúdo contido na página número 18
Warranty and returns grizzly industrial, inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. this warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance. this is grizzly’s sole written warranty and any and all warranties that may be implied by law, including any merchantability or fitness, for any particular purpose, are hereby limited to
Resumo do conteúdo contido na página número 19
Warranty card name _________________________________________________________________ street _________________________________________________________________ City _______________________ state _________________________ zip _________ phone # ____________________ email ________________________ invoice # _____ Model # ____________________ order # _______________________ serial # ______ The following information is given on a voluntary basis. It will be used for marketing purposes to help us develo
Resumo do conteúdo contido na página número 20
send a grizzly catalog to a friend: name________________________________ street________________________________ city______________state______zip_______ fold along dotted line place stamp here grizzly industrial, inc. p.o. box 2069 bellingham, Wa 98227-2069 tape along edges--please do not staple
