Manual do usuário Firestone rr 2068

Resumo do conteúdo contido na página número 1

RR 2068
WARNING:
Do not inflate this assembly when it is
unrestricted. The assembly must be re-
stricted by the suspension or other adequate
structure. Do not inflate beyond 100 P.S.I.
Improper use or over inflation may cause
property damage or severe personal injury.
Firestone Industrial Products
Carmel, Indiana, USA
INSTALLATION INSTRUCTIONS
Congratulations - your new Ride-Rite Air Helper Your kit includes separate inflation valves and air
Springs are quality products capable of improving t

Resumo do conteúdo contido na página número 2

      
  
     

   

                                      
    
            
   
"  
  
     

Resumo do conteúdo contido na página número 3

STEP 1 - PREPARE THE VEHICLE 
  Make sure that the vehicle is on a solid 
  level surface. Take necessary safety pre- cautions such as using wheel chocks when working under your vehicle. This vehicle 
  does not have to be jacked up to install the 
  kit. Remove the positive battery cable.   STEP 2 - PREASSEMBLE THE RIDE-RITE KIT   
Select one air helper spring from your
  kit

Resumo do conteúdo contido na página número 4

one existing frame hole must be drilled out to bolt the upper bracket tp the frame due to a heat shield covering the hole from the inside of the vehicle frame. This heat shield material must be removed using a 7/16" drill bit to allow the fastener to pass through the hole. STEP 6 - INSTALL THE AIR LINE AND THE INFLATION VALVE Uncoil the air line tubing and cut it into two equal lengths. DO NOT FOLD OR KINK THE TUBING. Try to make the cut as square as possible. Insert one end of the tubing