Resumo do conteúdo contido na página número 1
Power Blower
Operator's Manual
MODEL PB-610
WARNING DANGER
Read rules for safe operation and all instructions carefully. ECHO provides this
Operator's Manual which must be read and understood for proper and safe operation.
X753002790
X7531122000
12/06
Resumo do conteúdo contido na página número 2
2 INTRODUCTION Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job dependability. Read and understand this manual. You will find it easy to use and full of helpful operating tips and SAFETY messages. THE OPERATOR’S MANUAL Read and understand this manual before operation. Keep it in a safe place for future reference. It contains specifications and information for operation, starting, stopping, maintenance, storage, and assembly specif
Resumo do conteúdo contido na página número 3
IMPORTANT POWER BLOWER 3 OPERATOR'S MANUAL SAFETY MANUAL SAFETY SYMBOLS AND IMPORTANT INFORMATION Throughout this manual and on the product itself, you will find safety alerts and helpful, informational messages preceded by symbols or key words. The following is an explanation of those symbols and key words and what they mean to you. This symbol accompanied by the words WARNING and DANGER calls attention to an act or condition that can lead to serious personal injury to operator and bystanders.
Resumo do conteúdo contido na página número 4
4 Physical Condition Your judgment and physical dexterity may not be good: • if you are tired or sick, • if you are taking medication, • if you have taken alcohol or drugs. Operate unit only if you are physically and mentally well. Eye Protection Wear eye protection that meets ANSI Z87.1 or CE requirements whenever you operate the unit. Hand Protection Wear no-slip, heavy-duty work gloves to improve your grip on the blower handle. Gloves also reduce the transmission of machine vibration to your
Resumo do conteúdo contido na página número 5
POWER BLOWER 5 OPERATOR'S MANUAL Repetitive Stress Injuries It is believed that overusing the muscles and tendons of the fingers, hands, arms, and shoulders may cause soreness, swelling, numbness, weakness, and extreme pain in those areas. Certain repetitive hand activities may put you at a high risk for developing a Repetitive Stress Injury (RSI). An extreme RSI condition is Carpal Tunnel Syndrome (CTS), which could occur when your wrist swells and squeezes a vital nerve that runs through the
Resumo do conteúdo contido na página número 6
6 EQUIPMENT CHECK WARNING DANGER Use only ECHO approved attachments. Serious injury may result from the use of a non-approved attachment combination. ECHO, INC. will not be responsible for the failure of cutting devices, attachments or accessories which have not been tested and approved by ECHO. Read and comply with all safety instructions listed in this manual and safety manual. • Check unit for loose/missing nuts, bolts and screws. Tighten and/or replace as needed. • Inspect fuel lines, tan
Resumo do conteúdo contido na página número 7
POWER BLOWER 7 OPERATOR'S MANUAL DESCRIPTION Locate these safety decals on your unit. Make sure the decals are legible and that you understand and follow the instructions on them. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDER- ING instructions for specific information. 8 1 Hot Decal (near muffler) 2 9 P/N 89016006361 3 7 10 11 4 12 5 14 6 13 General Warning Decal (located on top of blower housing) P/N 89016009461 Sound Label (located on blower hous
Resumo do conteúdo contido na página número 8
8 1. AIR CLEANER - Contains replaceable air filter element. 2. SPARK PLUG - Provides spark to ignite fuel mixture. 3. SPARK ARRESTOR - CATALYTIC MUFFLER / MUFFLER - The muffler or catalytic muffler controls exhaust noise and emission. The spark arrestor screen prevents hot, glowing particles of carbon from leaving the muffler. Keep exhaust area clear of flammable debris. 4. RECOIL STARTER HANDLE - Pull recoil handle slowly until starter engages, then quickly and firmly. When engine starts, retu
Resumo do conteúdo contido na página número 9
POWER BLOWER 9 OPERATOR'S MANUAL ASSEMBLY WARNING DANGER Never perform maintenance or assembly procedures with engine running or serious personal injury may result. INSTALL BLOWER PIPES / STICK HANDLE A A 1. Assemble clamps (A) onto both ends of flexible pipe (B). B 2. Assemble swivel pipe (C) into flexible pipe (B) and tighten clamp (A). B C 3. Assemble flexible pipe (B) to elbow (D) on blower and tighten clamp (A). NOTE D A light lubricant may be used to ease assembly of flexible pipe to bl
Resumo do conteúdo contido na página número 10
10 OPERATION NOTICE: Use of unmixed, improperly mixed, or fuel older than 90 days, (stale fuel), may cause hard starting, poor performance, or severe engine damage and void the product warranty. Read and follow instructions in the Storage section of this manual. FUEL WARNING Alternative fuels, such as E-20 (20% ethanol), E-85 (85% ethanol) or any fuels not meeting ECHO requirements are NOT approved for use in ECHO 2-stroke gasoline engines. Use of alternative fuels may cause performance proble
Resumo do conteúdo contido na página número 11
Slow Fast Stop POWER BLOWER 11 OPERATOR'S MANUAL Mixing Instructions Fuelto OilMix -50:1 Ratio 1. Fill an approved fuel container with half of the required amount of UC .S. METRI gasoline. 2. Add the proper amount of 2-stroke oil to gasoline. GL AS OS I GL A OI 3. Close container and shake to mix oil with gasoline. G. allonsFr l. ozL. ite cc 4. Add remaining gasoline, close fuel container, and remix. 1 2.6 4 80 IMPORTANT 2 5.2 8 160 Spilled fuel is a leading cause of hydrocarbon emissions. Some
Resumo do conteúdo contido na página número 12
Slow Fast Stop 12 4. Recoil Starter Pull recoil starter handle (D) and engine should start. 5. Choke Move choke (B) to run ( ) position and if necessary, restart engine. NOTE If engine does not start after 5 pulls, repeat instructions 2-5. D NOTE Allow engine to warm up before use. STARTING WARM ENGINE A The starting procedure is the same as Cold Start except DO NOT close the choke. 1. Throttle Lever Move throttle lever (A) to "SLOW" (START) position. 2. Purge Bulb Pump purge bulb (C) until fuel
Resumo do conteúdo contido na página número 13
Slow Slow Fast Fast Stop Stop POWER BLOWER 13 OPERATOR'S MANUAL STOPPING ENGINE 1. Throttle Lever A Move throttle lever (A) to "SLOW" position and allow engine to return to idle before shutting off engine. 2. Move throttle lever (A) to "STOP" position. WARNING DANGER If engine does not stop when stop switch is moved to STOP position, close choke - COLD START position - to stall engine. Have your ECHO dealer repair stop switch before using blower again. OPERATING BLOWER WARNING DANGER Alway
Resumo do conteúdo contido na página número 14
14 MAINTENANCE Your ECHO unit is designed to provide many hours of trouble free service. Regular scheduled maintenance will help your unit achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to DO-IT-YOURSELF or have the ECHO Dealer do it, each maintenance task has been graded. If task is not listed, see your ECHO Dealer for repairs. SKILL LEVELS Level 1 =
Resumo do conteúdo contido na página número 15
POWER BLOWER 15 OPERATOR'S MANUAL WARNING DANGER Allow the engine and muffler to completely cool before performing any maintenance activity. AIR FILTER Level 1. Tools required: 25 - 50mm (1 - 2 in.) cleaning brush Parts required: Tune Up Kit P/N 90071C NOTE Always brush dirt and debris away from air cleaner area prior to cleaning air filter. 1. Brush dirt off air cleaner area. Keep dirt away from engine and air intake grid. 2. Remove air filter cover. Brush dirt from inside cover and away fr
Resumo do conteúdo contido na página número 16
16 FUEL FILTER Level 1. Tools required: 200-250 mm (8 - 10 in.) length of wire with one end bent into a hook, clean rag, funnel, and an approved fuel container. TM Parts required: REPOWER Tune Up Kit P/N 90071 WARNING DANGER Fuel is VERY flammable. Use extreme care when mixing, storing or handling. 1. Use a clean rag to remove loose dirt from around fuel cap and empty fuel tank. 2. Use the “fuel line hook” to pull the fuel line and filter from the tank. 3. Remove the filter from the line and
Resumo do conteúdo contido na página número 17
POWER BLOWER 17 OPERATOR'S MANUAL COOLING SYSTEMS CLEANING Level 2. Tools required: 25 - 50 mm (1 - 2 in.) Cleaning brush, cross head screwdriver Parts Required: None, if you are careful. IMPORTANT To maintain proper engine operating temperatures, cooling air must pass freely through the cylinder fin area. This flow of air carries combustion heat away from the engine. Overheating and engine seizure can occur when: • Air intakes are blocked, preventing cooling air from reaching the cylinder. • D
Resumo do conteúdo contido na página número 18
18 EXHAUST SYSTEM Spark Arrestor Screen Level 2. Tools required: Cross head screwdriver, soft metal brush Parts Required: Spark arrestor screen. Gaskets (3) IMPORTANT Carbon deposits in muffler will cause a drop in engine output and overheating. Spark arrestor screen must be checked periodically. A B C 1. Remove spark plug and engine cover (five screws). D 2. Remove spark arrestor cover (A), gaskets (B, C, D) and spark arrestor screen (E) from muffler. E NOTE When cleaning carbon deposits, be c
Resumo do conteúdo contido na página número 19
POWER BLOWER 19 OPERATOR'S MANUAL CARBURETOR ADJUSTMENT Engine Break-In New engines must be operated a minimum duration of two tanks of fuel break-in before carburetor adjustments can be made. During the break-in period your engine performance will increase and exhaust emissions will stabilize. Idle speed can be adjusted as required. High Altitude Adjustment High altitude adjustment may be required for proper operation of this engine. IMPORTANT For engine operation above 2,000 feet, turn the hig
Resumo do conteúdo contido na página número 20
20 Initial Adjustment 1. With engine off, turn HI speed screw (C) counterclockwise to stop. 2. Turn LO speed screw (B) midway between stops. 3. Turn idle screw (A) until tip of screw just touches throttle plate; then turn three (3) turns clockwise. Final Adjustment IMPORTANT Limiter caps prevent exceeding emission limits and over rich A adjustment, but not over lean adjustment, which can cause engine failure: Do not exceed recommended HI speed engine R.P.M. during operation, or for long periods
