Resumo do conteúdo contido na página número 1
This manual should only be
used for Elite Tactical Riflescopes
with illuminated reticles:
Illuminated Mil Dot Tactical Reticle
BTR-Mil™ Bushnell Tactical Reticle
BTR-1™ Bushnell Tactical Reticle
BTR-2™ Bushnell Tactical Reticle
PROUD USA COMPANY
03-13
Resumo do conteúdo contido na página número 2
TABLE OF CONTENTS Page # Contents Parts Guide 4-5 Fast Focus Eyepiece 6 Power Change Ring 6 Side Focus (Parallax) 6 First Focal Plane and Second Focal Plane Reticles 7 Bore Sighting and Zeroing the Scope 7-8 Elevation and Windage Target Turrets (3-12x44 & 6-24x50 models) 9-10 Elevation and Windage Finger Touch Adjustments (1-6.5x24 models) 11 Elevation and Windage T-LOK™ Turrets (ET18524) 12-13 Using the Mil Dot Reticle (ET3124F / ET6245F) 14-16 Using the BTR-Mil™ Ballistic Tactical Reticle (ET3
Resumo do conteúdo contido na página número 3
TABLE OF CONTENTS Page # Contents Using the BTR-2 First Focal Plane Tactical Reticle Tactical Reticle 22 (ET1624J / ET18524) Using the BTR-2 Second Focal Plane Tactical Reticle Tactical Reticle 24 (ET1624SJ ) Maintenance and Storage 26 Mil Dot Appendix: Using Mil Dot Reticles for Ranging 27 Mil Dot Appendix: Converting Trajectory Data to Mil Holdovers 28 Mil Dot Appendix: Cartridge Table Example 29 Mil Dot Appendix: Using Mil Dot Reticles for Holdover 30 3
Resumo do conteúdo contido na página número 4
PARTS GUIDE Brightness Dial Elevation Target Turret w/ Battery Cover Side Focus Adjustment Fast Focus Eyepiece Power Change Ring Windage Target Turret Models with Side Focus (3-12x44, 6-24x50) 4
Resumo do conteúdo contido na página número 5
PARTS GUIDE Elevation Adj. (T-Lok) Brightness Dial w/Battery Cover Fast Focus Eyepiece Power Change Ring Elevation Adj. Windage Adj. (T-Lok) 1-8.5x24 Brightness Dial w/Battery Cover 1-6.5x24 Windage Adj. (w/Finger touch adj. caps) Models w/o Side Focus 5
Resumo do conteúdo contido na página número 6
FAST FOCUS EyEPIECE The fast-focus eyepiece dial is found on the ocular end of the Bushnell Elite Tactical Riflescope. Use this adjustment to obtain a reticle image that appears sharp to your eyes. If adjustment is needed, look at a distant object for several seconds without using your scope. Then, shift your vision quickly, looking through the scope at a plain background. Turn the fast-focus eyepiece dial clockwise or counterclockwise until the reticle pattern is sharp and clear. The eyepie
Resumo do conteúdo contido na página número 7
Please note the distance markings on the dial are intended as reference points only. Exact side focus adjustments may be needed after making adjustments to the eyepiece in order to achieve a high resolution, parallax free image. FIRST FOCAL PLANE AND SECOND FOCAL PLANE RETICLES Some models of Bushnell Elite Tactical Riflescopes described this manual have their illuminated reticles located in the first focal plane, while others place the reticle in the second focal plane. If the reticle is with
Resumo do conteúdo contido na página número 8
In the example to the left using the BTR-Mil reticle, the shooter was attempting to hit a target in the center of the crosshairs. The actual point of impact hit 4 Mils down and 3 Mils left, as indicated by the red dot. Adjust the elevation dial 4 Mils up/windage dial 3 Mils right. Another way to accomplish this is to return the weapon to the original aiming point on the target. Ensure that it is securely held in place. While holding the weapon steady, adjust the elevation knob until the ho
Resumo do conteúdo contido na página número 9
ELEvATION AND WINDAGE TARGET TURRETS (3-12x44 & 6-24x50 MODELS) Selected models of Bushnell Elite Tactical Riflescope with illuminated reticle feature target style adjustment turrets, which provide audible and visual references. The turrets can be rotated in either direction to make appropriate adjustments. Each turn of the turret provides an audible “click” which coincides with a movement of the visible reference point on the turret knob. Additionally, clicks can be felt by your fingers as t
Resumo do conteúdo contido na página número 10
A Adjustment Scale C Index Line B 10
Resumo do conteúdo contido na página número 11
ELEvATION AND WINDAGE FINGER TOUCh ADJUSTMENTS (1-6.5x24 MODELS) 1-6.5x24 models of the Bushnell Elite Tactical Riflescope with illuminated reticle feature finger-adjustable, audible-click elevation and windage adjustments. To adjust the elevation or windage: 1. Remove the covers from the Elevation and Windage Adjustments. 2. Grasp the Adjustment Knob and turn it in the appropriate “UP” (and/or “R”) direction indicated by the arrows. Each “click” will change the bullet impact by .1 mil or appr
Resumo do conteúdo contido na página número 12
ELEvATION AND WINDAGE T-LOK™ TURRETS (ET18524) The model# ET18524 Bushnell Elite Tactical Riflescope features T-Lok™ (locking) turrets, which provide audible and visual references. When a turret is lifted (elevated) into the upward position it can be rotated in either direction to make appropriate adjustments. Each turn of the turret provides an audible “click” which coincides with a movement of the visible reference point on the turret knob. Additionally, clicks can be felt by your fingers a
Resumo do conteúdo contido na página número 13
ELEvATION AND WINDAGE T-LOK™ TURRETS (ET18524) STEP 2 STEP 1 STEP 4 STEP 3 13
Resumo do conteúdo contido na página número 14
USING ThE MIL DOT RETICLE (ET3124F / ET6245F) Your Bushnell riflescope contains a mil-dot reticle (1st focal plane), the most accurate means of range estimation using a manual optical device. These mil dots also allow precise leads for moving targets and exact compensation for shooting in a crosswind. RETICLE DESCRIPTION The middle of this reticle contains four evenly spaced mil-dots arrayed outward vertically and horizontally from the center. Actually, because the very center dot was left out
Resumo do conteúdo contido na página número 15
height or width carefully in mils, compute it according to the formula and you will find its range. Support your rifle and be precise when measuring objects; any measuring error causes an error in the computed range. Equally, a mistake in estimating the object size results in a proportional range error. Here’s an example: A coyote is sunning himself in a snowfield beside a fencepost; having crossed the fence earlier, you know that the post is four feet high, or 1.33 yards. The fencepost meas
Resumo do conteúdo contido na página número 16
The Mil Dot Reticle Measurement System in the First Focal Plane Applies at any Magnification Level. 2 Mils at 12x 2 Mils at 3.5x (100 yards) (100 yards) 16
Resumo do conteúdo contido na página número 17
USING ThE BTR-MIL™ BALLISTIC TACTICAL RETICLE (ET3124FJ / ET6245FJ) The Bushnell BTR-Mil™ Ballistic Tactical Reticle is a hashmarked reticle that uses mrad based subtension lines for ranging, holdover and windage corrections. The illuminated 1 mil diameter circle with .1 mil center dot provides an unobstructed view of the target with 10 illumination settings. In order to facilitate accurate holdover and windage compensation, this reticle uses hash marks spaced in 1 mil increments with .5 mil
Resumo do conteúdo contido na página número 18
USING ThE BTR-1 TACTICAL RETICLE IN A FIRST FOCAL PLANE SCOPE (ET1624F) Elite Tactical model ET1624F with the BTR-1 Tactical Reticle is designed to be sighted-in at 100 yards (or meters), and provides hold over points out to 600 meters. This reticle is calibrated for use with 223 Rem/5.56 ammunition loaded with 55-62 grain bullets. Because the BTR-1 reticle is located in the first focal plane (FFP) position in this model, it will be accurate for all targets at any magnification setting. It al
Resumo do conteúdo contido na página número 19
Fig. 1 100 METERS/YARDS 300 METERS Fig. 2 400 METERS 500 METERS 600 METERS Note: the scope should be zeroed at 100 Meters/yards 19
Resumo do conteúdo contido na página número 20
USING ThE BTR-1 TACTICAL RETICLE IN A SECOND FOCAL PLANE SCOPE ( ET1624SF) Elite Tactical model ET1624SF with the BTR-1 Tactical Reticle is designed to be sighted-in at 100 meters/yards, and provides hold over points out to 600 meters. This reticle is calibrated for use with 223 Rem/5.56 ammunition loaded with 55-62 grain bullets. The reticle design allows accurate aiming points out to 600 meters. It also features an illumination control dial with 11 brightness settings, including 2 positions
