Manual do usuário Invacare Lap Tray

Resumo do conteúdo contido na página número 1


 




     

NOTE: Check all parts for shipping damages before us-
INSTALLATION (FIGURE 1)
ing. In case of damage, do NOT use the equipment. Con-
1. Remove Lap Tray/tray rails from packaged container.
tact the Carrier/ Dealer for further instructions.
2. Measure the distance (outside to outside) at the
SAFETY SUMMARY front and rear of armrest pads.
3. Subtract this measurement from the width of the Lap
WARNING
Tray. Refer to the example.
DO NOT i

Resumo do conteúdo contido na página número 2

8. Tighten the screws in place and re-check measure- WARNING ment. DO NOT continue to use this product if any 9. Open wheelchair and slide the Lap Tray over the arm- deformation, breakage or other problems rests. should be discovered. Corrective mainte- nance can be performed at or arranged 10. Position stop pins in tray rails according to type of arm through your local Invacare Dealer. pads on wheelchair (FIGURE 1). The Lap Tray is designed for use with a MAINTENANCE wheelchair ONLY. The Lap Tr