Manual do usuário Invacare 6681-5

Resumo do conteúdo contido na página número 1



 
 





 


ASSEMBLING THE BASE (FIGURE 1)
SAVE THESE INSTRUCTIONS
Models 6681-5 and 6845-5
NOTE: Check ALL parts for shipping damage. If ship-
1. Place base upside down.
ping damage is noted, DO NOT use. Contact Carrier/
Dealer for further instructions.
2. Align a caster stem with a mounting hole in the base.
3. Firmly push down on bottom of caster until caster
SAFETY SUMMARY
stem snaps into mo

Resumo do conteúdo contido na página número 2

B. MODEL 6845 - ASSEMBLING THE I.V. STAND 1. Align the upper base half and the lower base (FIGURE 2) half as shown in FIGURE 2. 1. Perform one (1) of the following: NOTE: The lower base half has a recess. A. MODELS 6681-5 AND 6845-5 - 2. Insert the bolt UP through wrench, small steel 1. Place black plastic insert into the hole pro- washer, mounting holes in lower base half and vided on top of the base. upper base half and large steel washer. 2. Insert the lower I.V . tube through the black plas-