Resumo do conteúdo contido na página número 1
®
CABRIO™ AUTOMATIC
WASHER WITH
6TH SENSE™
TECHNOLOGY
Use & Care Guide
For questions about features, operation/performance,
parts, accessories or service call: 1-800-253-1301
In Canada, call: 1-800-807-6777
or visit our website at
www.whirlpool.com or www.whirlpool.ca
LAVADORA
AUTOMÁTICA CABRIO™
CON TECNOLOGÍA
6TH SENSE™
Manual de uso y cuidado
Si tiene preguntas respecto a las características, funcionamiento,
rendimiento, partes, accesorios o servicio técnico, llame al:
1-800-253-1301
En
Resumo do conteúdo contido na página número 2
Luces de estado.........................................................................37 Ciclos..........................................................................................37 TABLE OF CONTENTS Modificadores.............................................................................39 Opciones ....................................................................................40 WASHER SAFETY ..........................................................................3 Controles de
Resumo do conteúdo contido na página número 3
WASHER SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean: You can be killed or seriously injured if you don't immediately DAN
Resumo do conteúdo contido na página número 4
INSTALLATION REQUIREMENTS Tools and Parts Gather the required tools and parts before starting installation. Alternate Parts The parts supplied are in the washer basket. Your installation may require additional parts. If you are interested in purchasing one of the items listed here, call the toll-free Tools needed for connecting the drain hose and water number on the cover or in the “Assistance or Service” section. inlet hoses: If You Have: You Will Need to Buy: ■ Pliers that open to 1⁹⁄₁
Resumo do conteúdo contido na página número 5
Location Requirements Drain System Selecting the proper location for your washer improves The washer can be installed using the standpipe drain system performance and minimizes noise and possible washer “walk.” (floor or wall), the laundry tub drain system, or the floor drain system. Select the drain hose installation method you need. See Your washer can be installed in a basement, laundry room, “Tools and Parts.” closet, or recessed area. See “Drain System.” IMPORTANT: Do not install or st
Resumo do conteúdo contido na página número 6
Electrical Requirements ■ Do not ground to a gas pipe. WARNING ■ Check with a qualified electrician if you are not sure the washer is properly grounded. ■ Do not have a fuse in the neutral or ground circuit. GROUNDING INSTRUCTIONS Electrical Shock Hazard For a grounded, cord-connected washer: This washer must be grounded. In the event of a malfunction Plug into a grounded 3 prong outlet. or breakdown, grounding will reduce the risk of electrical Do not remove ground prong. shock by providi
Resumo do conteúdo contido na página número 7
INSTALLATION INSTRUCTIONS 6. Remove tape from lid. Open lid and remove foam packing ring from washer tub. Keep foam packing ring in case you Before You Start need to move the washer in the future. WARNING Excessive Weight Hazard Use two or more people to move and install washer. Failure to do so can result in back or other injury. NOTE: To avoid floor damage during installation, set the washer onto cardboard before moving across floor. IMPORTANT: ■ Be sure the foam shipping base has been rem
Resumo do conteúdo contido na página número 8
4. Using pliers, tighten the couplings with an additional Laundry tub drain or standpipe drain two-thirds turn. Connecting the drain hose form to the corrugated drain hose A Tighten the couplings with an additional two-thirds turn. NOTE: Do not overtighten or use tape or sealants on the 4.5" valve. Damage to the valves can result. (11.4 cm) Clear the water lines ■ Run water through both faucets and inlet hoses, into a laundry tub, drainpipe or bucket, to get rid of particles in the A. Dr
Resumo do conteúdo contido na página número 9
4. Using pliers, tighten the coupling with an additional 3. Fasten the drain hose to the laundry tub leg or drain two-thirds turn. standpipe with the beaded tie strap. See view A or B. NOTE: Do not overtighten or use tape or sealants on the valve. Damage to the valves can result. HOT COLD A B C If the washer faucets and the drain standpipe are recessed, put the formed end of the drain hose into the standpipe. Tightly wrap the tie strap around the water inlet hoses and the drain hose. See vi
Resumo do conteúdo contido na página número 10
4. Check the levelness of the washer by first placing a level on the lid near the console. Next, place the level on the side of Complete Installation the washer in the crease between the top of the washer and 1. Check the electrical requirements. Be sure that you have the the cabinet. correct electrical supply and the recommended grounding method. See “Electrical Requirements.” 2. Check that all parts are now installed. If there is an extra part, go back through the steps to see which st
Resumo do conteúdo contido na página número 11
BENEFITS AND FEATURES Your washer has several benefits and features which are summarized here. Some items may not apply to your model. The wool wash cycle of this machine has been High Efficiency (HE) Detergent approved by Woolmark for the washing of This washer is designed for High Efficiency (HE) detergent use machine washable Woolmark products provided only. HE detergents are made to produce the right amount of that the garments are washed according to the suds and give the best perform
Resumo do conteúdo contido na página número 12
Use Only H i g h E f f i c i e n c y D e t e r g e n t WASHER USE NOTE: Your washer model may vary from the model shown. 1. Place a load of sorted clothes into the washer. See “Laundry Tips.” Starting Your Washer ■ Load evenly to maintain washer balance. Mix large and small items. Items should move easily through the wash water. WARNING ■ Load only to the top of the basket as shown. Overloading can cause poor cleaning. Items need to move easily through the wash water. Fire Hazard Never
Resumo do conteúdo contido na página número 13
4. Pour measured liquid chlorine bleach into the liquid chlorine bleach dispenser, if needed. Bleach is diluted and Pausing or Restarting the Washer automatically dispensed at the proper time during the wash cycle. Add a Garment You can place additional clothing in the wash when the “Add a Garment” status light is glowing without sacrificing wash performance. To add a garment or pause the washer at any time 1. Press PAUSE/CANCEL once. 2. Wait until the Lid Lock light turns off, then open
Resumo do conteúdo contido na página número 14
Preset Cycle Settings Status Lights Cycle Preset Soil Wash/Rinse These lights show which portion of the cycle the washer is Minutes* Level** Temp operating. They also indicate when you can add other garments to the wash load. Whitest Whites 85 Heavy Hot/Cold Heavy Duty 73 Heavy Hot/Cold Bulky Items 53 Normal Warm/Cold Load is Done Sheets/Towels 50 Normal Warm/Cold The Done light stays on until the lid is opened or the Power or Pause/Cancel button is pressed. Normal 50 Normal Warm/Cold Indi
Resumo do conteúdo contido na página número 15
Normal To use or change Drain & Spin setting: Use this cycle for normally soiled cottons and mixed fabric loads. 1. Turn knob to DRAIN & SPIN until the Drain & Spin indicator Cycle combines high-speed wash action and high-speed spin. light glows. 2. Press START. Casual/Perm Press Use this cycle to wash loads of no-iron fabrics such as sport Clean Washer shirts, blouses, casual business clothes, permanent press and Use the Clean Washer cycle once a month to keep the inside of blends. This c
Resumo do conteúdo contido na página número 16
Wash-Rinse Temp Delay Wash Select a water temperature based on the type of load you are You can use the Delay Wash feature to delay the start of a wash washing. Use the warmest wash water safe for fabrics. Follow cycle for up to 10 hours (depending on your model). garment label instructions. 1. Load the washer and fill the dispensers. Warm rinses leave the loads drier and more comfortable to 2. Close the washer lid. handle than cold rinses. However, warm rinses also increase 3. Press POWER.
Resumo do conteúdo contido na página número 17
Deep Clean This option provides enhanced cleaning action for tough stains. Operating Controls The Heavy Duty cycle automatically includes Deep Clean. Choosing Deep Clean will add approximately 5 minutes to a Power cycle. Deep Clean should be started on a dry load only and Press POWER to turn the washer on or off. cannot be selected after the tub has started filling with water. Deep Clean may be selected as an option with other cycles. See table for details. Cycle Deep Clean (Adds time to
Resumo do conteúdo contido na página número 18
LAUNDRY TIPS ■ Stained or wet garments should be washed promptly for best Preparing clothes for washing results. Follow these recommendations to help you prolong the life of your garments. ■ Turn wool knits inside-out before washing. ■ Use only High Efficiency detergents. The package for this type of detergent will be marked “HE” or “High Efficiency.” Sorting This wash system, along with less water, will create too much ■ Separate heavily soiled items from lightly soiled ones, even if suds
Resumo do conteúdo contido na página número 19
To transport the washer: 1. Shut off both water faucets. Water Inlet Hoses 2. Disconnect and drain water inlet hoses. Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Periodically inspect and replace inlet hoses if bulges, 3. If the washer will be moved during freezing weather, put 1 qt kinks, cuts, wear or leaks are found. (1 L) of R.V.-type antifreeze in the basket. Run washer on the Rinse & Spin setting for about 30 seconds to mix the When replacing your inle
Resumo do conteúdo contido na página número 20
TROUBLESHOOTING First try the solutions suggested here and possibly avoid the cost of a service call... Washer and Components ■ “dL” (Door/Lid cannot lock) Washer displaying code messages Indicates lid is not locked. Check for items caught in the lid keeping it from closing. Press PAUSE/CANCEL once to clear ■ “LF” (Washer is taking too long to fill) the code. Check the following: Are the water inlet hoses kinked or clogged? ■ “dU” (Door/Lid cannot unlock) Are the water inlet valve screens clea
