Resumo do conteúdo contido na página número 1
Model No. PETL79810.0
Serial No.
Write the serial number in the space
above for reference. USERʼS MANUAL
Serial Number
Decal
QUESTIONS?
If you have questions, or if there are
missing parts, please contact us:
UK
Call: 08457 089 009
From Ireland: 053 92 36102
Website: www.iconsupport.eu
E-mail: csuk@iconeurope.com
Write:
ICON Health & Fitness, Ltd.
c/o HI Group PLC
Express Way
Whitwood, West Yorkshire
WF10 5QJ
UK
AUSTRALIA
Call: 1-800-237-173
E-mail:
australiacc@iconfitness.com
CAUTION
Read all p
Resumo do conteúdo contido na página número 2
TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . .
Resumo do conteúdo contido na página número 3
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and in- structions in this manual and all warnings on your treadmill before using your treadmill. ICON as- sumes no responsibility for personal injury or property damage sustained by or through the use of this product. 1. Before beginning any exercise program, con- 11. When connecting the power cord (see page sult your physician. This is especially impor- 16), plug the power cord into an earthed c
Resumo do conteúdo contido na página número 4
19. Never leave the treadmill unattended while it 23. Inspect and properly tighten all parts of the is running. Always remove the key, unplug treadmill regularly. the power cord, and press the power switch into the off position when the treadmill is not 24. DANGER: Always unplug the power in use. (See the drawing on page 5 for the lo- cord immediately after use, before cleaning the cation of the power switch.) treadmill, and before performing the mainte- nance and adjustment procedures described
Resumo do conteúdo contido na página número 5
BEFORE YOU BEGIN ® Thank you for selecting the revolutionary PROFORM ing this manual, please see the front cover of this man- 705 ZLT treadmill. The 705 ZLT treadmill offers an im- ual. To help us assist you, please note the product pressive selection of features designed to make your model number and serial number before contacting us. workouts at home more enjoyable and effective. And The model number and the location of the serial num- when youʼre not exercising, the unique treadmill can be b
Resumo do conteúdo contido na página número 6
ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton. This is normal and does not affect treadmill performance. If there is lubri- cant on top of the walking belt, simply wipe
Resumo do conteúdo contido na página número 7
1. Make sure that the power cord is unplugged. 1 Remove the 3/8" Nut (10), the 3/8" x 2" Bolt (8), and the shipping bracket (A) from the Base (95). Repeat this step on the other side of the treadmill. The 3/8" Nuts (10) and the 3/8" x 2" Bolts (8) will be used in assembly steps 3 and 6. Discard the shipping brackets. 95 A 8 10 2. With the help of a second person, carefully tip 2 C the treadmill onto its left side. Partially fold the Frame (55) so that the treadmill is more stable; B do not fully
Resumo do conteúdo contido na página número 8
3. See the inset drawing. Cut the plastic tie near 3 the Upright Wire (87). Plastic Tie Attach a Wheel (96) to the Base (95) with the 3/8" x 2" Bolt (8) and the 3/8" Nut (10) that you 89 removed in step 1. Do not overtighten the Nut; the Wheel must turn freely. 8 Press a Base Cap (89) into the Base (95). 95 96 Cut 10 87 4. Identify the Right Upright (85), which is marked 4 with a “Right” sticker. Hold the Right Upright 85 near the Base (95) as shown. See the inset drawing. Tie the wire tie in th
Resumo do conteúdo contido na página número 9
6. With the help of a second person, carefully tip 6 the treadmill onto its right side. Partially fold the Frame (55) so that the treadmill is more stable; C do not fully fold the Frame yet. B Remove and discard the two indicated bolts (B) and the shipping bracket (C). Attach a Wheel (96) to the Base (95) with the 89 3/8" x 2" Bolt (8) and the 3/8" Nut (10) that you removed in step 1. Do not overtighten the Nut; 8 the Wheel must turn freely. 55 Press a Base Cap (89) into the Base (95). 95 96 10
Resumo do conteúdo contido na página número 10
8. Identify the Left Base Cover (88) and the Right 8 Base Cover (91). Slide the Left Base Cover onto 84 the Left Upright (84) and the Right Base Cover onto the Right Upright (85). 85 88 91 9. Identify the Left Upright Cover (80). Slide the 9 Left Upright Cover onto the Left Upright (84). 4 Identify the Left Handrail (82). Remove the tie 38 from the bracket on the Left Handrail. If neces- sary, press the 5/16" Cage Nut (38) back into 13 place. 82 Attach the Left Handrail (82) to the Left Upright
Resumo do conteúdo contido na página número 11
10. Slide the Right Upright Cover (86) onto the 10 Right Upright (85). Remove the tie from the bracket on the Right Handrail (83). If necessary, 87 press the 5/16" Cage Nut (38) back into place. Bracket Hold the Right Handrail (83) near the Right Upright (85). Insert the Upright Wire (87) 38 through the bracket on the bottom of the Right 14 Handrail. Pull the Upright Wire out of the end of 4 the Right Handrail. 13 83 Attach the Right Handrail (83) to the Right Upright (85) with two 5/16" x 1" Fl
Resumo do conteúdo contido na página número 12
12. IMPORTANT: To avoid damaging the 12 Crossbar (107), do not use power tools and First do not overtighten the #10 x 3/4" Screws (2). 102 9 2 Orient the Crossbar (107) as shown. Attach the 12 Crossbar to the Handrails (82, 83) with four #10 x 3/4" Screws (2) and four #10 Star Washers 107 (12); do not tighten the Screws yet. 82 First Insert the Console Frame (102) into the Handrails (82, 83). Attach the Console Frame 9 2 with four 1/4" x 1" Patch Bolts (9); do not 12 tighten the Patch Bolts yet.
Resumo do conteúdo contido na página número 13
14. Set the console assembly on the Left and Right 14 Handrails (82, 83). Be careful not to pinch any Console wires. Insert the excess Upright Wire (87) into Assembly the Right Handrail. Attach the console assembly to the Crossbar 87 (107) with six #8 x 3/4" Screws (1). Start all six 105 Screws, and then tighten each of them. 82 Attach the two Console Clamps (105) to the 53 console assembly with four #8 x 1" Screws (53). 107 83 1 1 1 1 15. Hold the Right Upright Cover (86) against the 15 console
Resumo do conteúdo contido na página número 14
16. If necessary, press the Left Tray (103) and the 16 Right Tray (104) into the console assembly. Console 103 Assembly 104 17. Raise the Frame (55) to the position shown. 17 Have a second person hold the Frame until this step is completed. 55 Orient the Storage Latch (51) so that the large barrel and the latch knob are oriented as shown. 10 8 Attach the Latch Bracket (6) and Storage Latch (51) to the Base (95) with two 3/8" x 2" Bolts (8) and two 3/8" Nuts (10). 51 Attach the upper end of the S
Resumo do conteúdo contido na página número 15
HOW TO USE THE CHEST PULSE SENSOR HOW TO PUT ON THE CHEST PULSE SENSOR may remain activated longer than necessary, drain- ing the battery prematurely. The chest pulse sensor consists of two components: the chest strap and the sensor unit. Insert the tab on • Store the chest pulse sensor in a warm, dry place. one end of the chest strap into the hole in one end of Do not store the chest pulse sensor in a plastic bag the sensor unit, as shown in the inset drawing. Press or other container that may
Resumo do conteúdo contido na página número 16
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT 2. If you are plugging in the power cord in Australia, go to step 3. Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- If you are plugging in the power cord in the UK, icone spray or other substances to the walking belt first press the pins on the power cord into the metal or the walking platform. Such substances will dete- clips in the adapter as shown. Close the adapter riorate th
Resumo do conteúdo contido na página número 17
CONSOLE DIAGRAM FEATURES OF THE CONSOLE Weight Loss workout. iFit workouts automatically con- trol the treadmill. To purchase iFit cards at any time, The treadmill console offers an impressive array of go to www.iFit.com or call the telephone number features designed to make your workouts more effec- on the front cover of this manual. iFit cards are tive and enjoyable. also available at select stores. When the manual mode of the console is selected, you You can even listen to your favorite worko
Resumo do conteúdo contido na página número 18
HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not See HOW TO TURN ON THE POWER at the left. do this, you may damage the console displays or other electrical components. 2. Select the manual mode. Plug in the power cord (see When the key is in- page 16). Next, locate the serted, the manual mode power switch on th
Resumo do conteúdo contido na página número 19
4. Change the incline of the treadmill as desired. Distance/Incline dis- play—This display To change the incline of shows the distance that the treadmill, press the you have walked or run. Incline increase and de- This display will also crease buttons or one show the incline setting of the numbered incline for several seconds, each time the incline changes. buttons. Each time you press the Incline increase or decrease button, the Calories/Pulse incline will change by 0.5%. If you press one of th
Resumo do conteúdo contido na página número 20
6. Measure your heart rate if desired. 7. When you are finished exercising, remove the key from the console. Note: If you use the handgrip pulse sensor and the chest pulse sensor at the same time, the Step onto the foot rails, press the Stop button, and console will not display your heart rate accu- adjust the incline of the treadmill to the lowest rately. For information on the chest pulse sensor, setting. The incline must be at the lowest set- see page 15. ting or you may damage the treadmill
