Resumo do conteúdo contido na página número 1
Model No. PFTL56507.0
Serial No.
Write the serial number in the space
USER'S MANUAL
above for reference.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete cus-
tomer satisfaction. If you have
questions, or if parts are missing,
PLEASE DO NOT CONTACT
THE STORE; please contact
Customer Care.
IMPORTANT: You must note the
product model number and
serial number (see the drawing
above) before contacting us:
CALL TOLL-FREE:
1-888-533-1333
Mon.–Fri. 6
Resumo do conteúdo contido na página número 2
TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . .
Resumo do conteúdo contido na página número 3
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and in- structions in this manual and all warnings on your treadmill before using your treadmill. ICON as- sumes no responsibility for personal injury or property damage sustained by or through the use of this product. 1. Before beginning any exercise program, con- carrying 15 or more amps. No other appliance sult your physician. This is especially impor- should be on the same circuit. Do not use
Resumo do conteúdo contido na página número 4
20. Never leave the treadmill unattended while it 24. Inspect and properly tighten all parts of the is running. Always remove the key, unplug treadmill regularly. the power cord, and switch the reset/off cir- cuit breaker to the off position when the 25. DANGER: Always unplug the power treadmill is not in use. (See the drawing on cord immediately after use, before cleaning the page 5 for the location of the circuit breaker.) treadmill, and before performing the mainte- nance and adjustment proc
Resumo do conteúdo contido na página número 5
BEFORE YOU BEGIN ® Thank you for selecting the revolutionary PROFORM number and serial number before contacting us. The 665 E. The 665 Eoffers an impressive selection of fea- model number and the location of the serial number tures designed to make your workouts at home more decal are shown on the front cover of this manual. enjoyable and effective. And when you’re not exercis- ing, the unique 665 E can be folded up, requiring less To avoid a registration fee for any service needed than half th
Resumo do conteúdo contido na página número 6
ASSEMBLY To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal con
Resumo do conteúdo contido na página número 7
1. Make sure that the power cord is unplugged. 1 B With the help of a second person, carefully tip A the treadmill onto its left side. Partially fold the Frame (56) so that the treadmill is more stable; Hole do not fully fold the Frame yet. 38 83 Remove and discard the two indicated bolts (A) 81 and the shipping bracket (B). Cut the tie securing the Upright Wire (38) to the 2 Base (83). Locate the tie in the indicated hole in the Base, and use the tie to pull the Upright Wire out of the hole. At
Resumo do conteúdo contido na página número 8
4. Hold a Bolt Spacer (80) inside the lower end of 4 the Right Upright (78). Insert a 3/8" x 4" Bolt (6) 6 with a 3/8" Star Washer (9) into the Right Upright and the Bolt Spacer. Repeat this step 78 with a second Bolt Spacer (80), 3/8" x 4" Bolt 9 (6), and 3/8" Star Washer (9). 38 Hold the Right Upright Spacer (79) and the 80 Right Upright (78) against the Base (83). Be careful not to pinch the Upright Wire (38). Tighten the 3/8" x 4" Bolts (6) with your fingers; 80 77 do not fully tighten the
Resumo do conteúdo contido na página número 9
6. With the help of a second person, hold a Bolt 6 Spacer (80) inside the lower end of the Left Upright (74). Insert a 3/8" x 4" Bolt (6) with a 6 74 3/8" Star Washer (9) into the Left Upright and 9 the Bolt Spacer. Repeat this step with a second Bolt Spacer (80), 3/8" x 4" Bolt (6), and 3/8" Star Washer (9). 76 80 Orient the Left Upright (74) and the Left Upright Spacer (76) as shown. Hold the Left Upright Spacer and the Left Upright against the Base 80 (83). Tighten the two 3/8" x 4" Bolts (6
Resumo do conteúdo contido na página número 10
9. Set the Crossbar (39) on the console assembly. 9 Tighten two 1/4" x 3/4" Bolts (5) with two 1/4" 5 Star Washers (14) into the Crossbar. Start both 12 14 Bolts but do not tighten them yet. 90 Tighten four 1/2" Screws (1) into the Crossbar (39). Start all four Screws before tightening 1 any of them. Tighten the two 1/4" x 3/4" Bolts (5) and the four 39 3/4" Screws (12) in the Right and Left Handrails (90, 88). 1 5 14 88 Console Assembly 12 10. Slide the Left Handrail Spacer (96) and the Right 1
Resumo do conteúdo contido na página número 11
12. Attach the Right Handrail (90) to the Right 12 Upright (78) with three 5/16" x 1" Bolts (7) and Console Assembly three 5/16" Star Washers (10). Repeat on the left side (not shown). Start all six Bolts before tightening them. See steps 4 and 6. Tighten the 3/8" x 4" Bolts (6). 90 7 10 7 10 78 13. If necessary, press the Left Tray (92) and the 13 Right Tray (93) into the Console Back (91). 92 Tighten a 1/2" Screw (1) into the Left Handrail Spacer (96) and Right Handrail Spacer (97). 91 93 96 1
Resumo do conteúdo contido na página número 12
15. Raise the Frame (56) to the position shown. 15 Have a second person hold the Frame until this step is completed. 56 Orient the Storage Latch (53) so that the large barrel and the Latch Knob (54) are oriented as 8 4 shown. Attach the Latch Bracket (109) and Storage Latch 53 (53) to the Base (83) with two 3/8" x 2" Bolts (4) and two 3/8" Nuts (8). 54 Large Attach the upper end of the Storage Latch (53) Barrel to the bracket on the Frame (56) with a 3/8" x 2" Bolt (4) and a 3/8" Nut (8). Note:
Resumo do conteúdo contido na página número 13
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT tric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding Your treadmill features a walking belt coated with high- plug. Plug the power cord into a surge suppressor, performance lubricant. IMPORTANT: Never apply sil- and plug the surge suppressor into an appropriate icone spray or other substances to the walking outlet that is properly installed and grounded in belt or the walking platform. Su
Resumo do conteúdo contido na página número 14
CONSOLE DIAGRAM Key Clip FEATURES OF THE CONSOLE To turn on the power, follow the steps on page 15. To use the manual mode of the console, see page The treadmill console offers an impressive array of 15. To use a preset workout, see page 17. To use features designed to make your workouts more effec- the information mode, see page 18. To use the tive and enjoyable. stereo sound system, see page 18. When the manual mode of the console is selected, you IMPORTANT: If there is a sheet of clear plast
Resumo do conteúdo contido na página número 15
HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not See HOW TO TURN ON THE POWER at the left. do this, the console displays or other electrical components may become damaged. 2. Select the manual mode. Plug in the power cord (see When the key is inserted, page 13). Next, locate the the manual mode will be Reset r
Resumo do conteúdo contido na página número 16
4. Change the incline of the treadmill as desired. Speed display—This display shows the speed To change the incline of of the walking belt. the treadmill, press the Incline increase and de- crease buttons or one of the numbered incline To reset the displays, press the Stop button, re- buttons. Each time you move the key, and then reinsert the key. press the incline increase or decrease button, the incline will change by 0.5%. If you press one of the 6 . Measure your heart rate if desired. numbe
Resumo do conteúdo contido na página número 17
HOW TO USE A PRESET WORKOUT segment, a series of Current Segment tones will sound and the 1. Insert the key into the console. next segment of the pro- file will begin to flash. If a See HOW TO TURN ON THE POWER on page 15. different speed or incline setting is programmed for 2. Select a preset workout. the next segment, the speed or incline setting To select a preset workout, press the Weight Loss will flash in the display to alert you. Workouts, Aerobic Workouts, Endurance Workouts, or Performa
Resumo do conteúdo contido na página número 18
THE INFORMATION MODE HOW TO USE THE STEREO SOUND SYSTEM The console features an information mode that keeps To play music or audio books through the console’s track of the total number of hours that the treadmill has stereo speakers, you must connect your MP3 player, been used and the total distance that the walking belt CD player, or other personal audio player to the con- has moved. The information mode also allows you to sole through the audio jack. switch the console from miles to kilometers
Resumo do conteúdo contido na página número 19
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may damage the treadmill when you fold it. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. 1. Hold the metal frame firmly in the location shown by the arrow at the right. CAUTION: To decrease the pos- sibility of injury, do not lift t
Resumo do conteúdo contido na página número 20
HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand. Pull the latch knob to the left and hold it. It may be neces- sary to push the frame forward as you pull the knob to the left. Pivot the frame downward and release the latch knob. Latch Knob 2. Hold the metal frame firmly with both hands and lower it to the floor. CAUTION: Do not grip only the plastic foot rails or drop the frame to the floor. Bend your legs and keep your back straight. 20
