Resumo do conteúdo contido na página número 1
Mitel SX-50, -200, -2000 System
LinkPlus Interface Guide
SpectraLink 6000 System
SpectraLink 8000 System
July 2008 Edition
1725-36137-001
Version E
Resumo do conteúdo contido na página número 2
LinkPlus Interface Guide: Mitel SX-50, -200, -2000 System Trademark Information Notice Polycom® and the logo designs Polycom, Inc. has prepared this document for SpectraLink® use by Polycom personnel and customers. The LinkPlus drawings and specifications contained herein Link are the property of Polycom and shall be neither NetLink reproduced in whole or in part without the prior SVP written approval of Polycom, nor be implied to Are trademarks and registered trademarks of grant any
Resumo do conteúdo contido na página número 3
About this Guide Polycom is the market leader in multi-cellular wireless telephone systems for the workplace. We manufacture a range of products to suit any size installation. All Polycom products use our LinkPlus digital integration technology to integrate with various digital switch platforms. Using LinkPlus technology, Wireless Telephones (handsets) emulate digital telephone sets to deliver advanced capabilities such as multiple line appearances and LCD display features. This docume
Resumo do conteúdo contido na página número 4
LinkPlus Interface Guide: Mitel SX-50, -200, -2000 System Related Documents SpectraLink 6300 MCU : Operator’s Console (1725-36125-001) SpectraLink 6100 MCU: Installation and Operation (1725-36097-001) SpectraLink 6020 Wireless Telephone and Accessories User Guide (1725-36092-001) Available at http://www.polycom.com/usa/en/support/voice/proprietary_wire less/proprietary_wireless.html SpectraLink 8000 Telephony Gateway: Administration Guide for SRP (1725-36028-001) SpectraLink 8020/80
Resumo do conteúdo contido na página número 5
About this Guide Icons and Conventions This manual uses the following icons and conventions. Caution! Follow these instructions carefully to avoid danger. Note these instructions carefully. Label This typeface indicates a key, label, or button on SpectraLink hardware. PN: 1725-36137-001_E.doc 5
Resumo do conteúdo contido na página número 6
Resumo do conteúdo contido na página número 7
1 Plan the Interface The system administrator programs the telephone system for use with the Wireless Telephone System using the normal administration terminal or procedures. Programming can be done after the handsets are registered. Recommended programming includes assigning extension numbers to the handsets and programming features on the telephone system so they are easily accessible from the handsets. For analog interfaces, macro codes are in the document relating to configuring
Resumo do conteúdo contido na página número 8
LinkPlus Interface Guide: Mitel SX-50, -200, -2000 System “model” handsets then use the model as a template to program the other handsets. • All handsets are different: All handsets are programmed differently, so each handset will be programmed individually. Before the handset System is installed, verify the customer data entries for the site’s system and telephones, and plan the programming required for the handsets. Programming will be faster if you determine this information in advanc
Resumo do conteúdo contido na página número 9
Plan the Interface The Wireless Telephone Display The SpectraLink Wireless Telephone will display the telephone number as it is dialed. Certain characters may be used by the system that are not implemented in the handset. Flashing characters are not implemented on the handset, nor is rolling or scrolling of text. Although some desksets do not have a display, any display information sent by the system will be displayed on the handset. Handset indicators Line indicators are associated w
Resumo do conteúdo contido na página número 10
LinkPlus Interface Guide: Mitel SX-50, -200, -2000 System Feature Programming Requirements When planning the interface, the following information must be taken into account: Line sequences The handset uses two types of key sequences to access PBX features and multiple lines. Line sequences are those where the user presses the LINE key and then a number key. The key-map design designates “line” keys that should be programmed for line appearance so that they correspond to line sequences o
Resumo do conteúdo contido na página número 11
Plan the Interface Function Menu Programming SpectraLink 6300 MCU Note that the function menu defaults set for the handsets associated with the SpectraLink 6300 MCU can be changed via the SpectraLink Operator’s Console. If the system uses softkeys, to minimize unwanted interaction between system display and the handset function menu display, configure the handset menu to include a delay of one function key. The user will then have to press FCN twice before the handset menu displays, all
Resumo do conteúdo contido na página número 12
LinkPlus Interface Guide: Mitel SX-50, -200, -2000 System Hold The Hold feature should be programmed to the Hold key as shown on the key-map diagrams so that when the Hold key or softkey is pressed on the handset, the call is placed on hold. Mute The handset Mute function is hard-coded to FCN +1 on the PTB4xx handset. This function sequence is recommended, but the system administrator can assign the Mute function to any available function key sequence or leave the function unassigned. T
Resumo do conteúdo contido na página número 13
2 Interface Implementation This section describes the recommended programming to use the Wireless Telephone System (CPM interface module or SCX-416 MCU) with a Mitel PBX. The procedures assume: • The Mitel SX-200, SX-50, or SX-2000 system is installed and operational in an approved configuration. See the Telephone Switch Interface Matrix document for tested configurations. • A trained Mitel technician or system administrator will be on site with the Installer to program the system. •
Resumo do conteúdo contido na página número 14
LinkPlus Interface Guide: Mitel SX-50, -200, -2000 System Configuration. Scroll to Telephone Switch Type and press enter to change this field, from the Submenu of PBX types, select Mitel. Refer to SpectraLink 8000 Telephony Gateway: Administration Guide for SRP for details on configuring the Telephone Switch Type. Key-mapping the Handset to Emulate the Superset 420 Superset 420 Key-mapping The FCN [number] and LINE [number] labels represent the key sequence on the handset mapped to th
Resumo do conteúdo contido na página número 15
Interface Implementation The handset function menu default settings are shown in the table below; these may be changed as described above in Function Menu Programming. Some of these functions (Mute, Redial, Forward, etc.) are activated by softkeys or FCN menu options on the SpectraLink 6000 and SpectraLink 8020/8030 Wireless Telephones. FCN + 1 FCN + 2 MUTE XFER/CONF FCN + 3 FCN + 4 REDIAL MSG LINE + 0 LINE + * CANCEL SUPERKEY FCN + 9 EXIT MENUS Program Mitel The Mitel Technicia
Resumo do conteúdo contido na página número 16
Resumo do conteúdo contido na página número 17
3 Extension Assignments Worksheet Shelf: _______ Interface Module: _______ Interface Handset Handset # Ext. # Name Module Comment Serial # Circuit # Handset 1 1 Handset 2 2 Handset 3 3 Handset 4 4 Handset 5 5 Handset 6 6 Handset 7 7 Handset 8 8 Handset 9 9 Handset 10 10 Handset 11 11 Handset 12 12 Handset 13 13 Handset 14 14 Handset 15 15 Handset 16 16 PN: 1725-36137-001_E.doc 17
