Manual do usuário Panasonic SuperTooth II

Resumo do conteúdo contido na página número 1

USER GUIDE




Independent Hands free Kit with DSP for Bluetooth Mobile Phones

SuperTooth II is equipped with Bluetooth and Digital Signal Processor which allow wireless
communications on devices such as cellular phones.

This is designed lo be a totally portable wireless handsfree kit which will enable the user to
communicate freely without holding the phone. This will work on any Bluetooth cellular
phones available provided that they respect the Bluetooth protocol.

Don't forget

Resumo do conteúdo contido na página número 2

INSTALLATION Fix the metal clip of SuperTooth II on the sun visor Attach the magnetic back of SuperTooth II to the fixed metal clip. The SuperTooth II must be placed wherein its microphone is directed to the mouth of the user. The position of the SupetTooth II can vary according to the position of the sun visor. The Swivel Arm (1) can be adjusted to 0°, 55° and 210° orientations.

Resumo do conteúdo contido na página número 3

CHARGING THE SUPERTOOTH II SuperTooth II can he charged in a car using the SupetTooth II Saver Charger or at home using the Travel charger. 1. Connect the charger's plug into the Charger Input (5) of SuperTooth II. Charge Indicator(l0) Status: Steady Red: low batt Steady Green: fully charged Alternate Red/Green indicates charging 2. When fully charged, disconnect the charger. Bluetooth Indicator(9) Status: Blinking Blue: standby(when Swivel Arm is open at 55° to 210° positi

Resumo do conteúdo contido na página número 4

PROCEDURE OF PAIRING TO THE MOBILE PHONE (Not possible while charging the SuperTooth II) Pairing will mate a link or connection between the two Bluetooth devices, SuperTooth II and your phone. 1. This kit supports either Handsfree or Headset pairing. First, refer to the Compatibility Table for suggested pairing modes to be able to determine what pairing mode is best for your phone. When you are certain of what pairing mode to use, proceed with the instructions. Note: Handsfree and He

Resumo do conteúdo contido na página número 5

HEADSET Pairing: 1. Bring the mobile phone at about 20cm from the SuperTooth II. 2. SuperTooth II is initially off. Turn it on by flipping up the Swivel Arm (1) b 55° position. The Bluetooth Indicator(9) will glow (blue blink). 3. Simultaneously press the Reject Button (2) and Pick- Up/Hang-Up Button (7) for about 10seconds. A distinctive tone will be heard and The Bluetooth Indicator LED will change from blinking blue to alternate blinking red and blue. 4. Press Pick

Resumo do conteúdo contido na página número 6

ANSWERING A CALL When the phone receives a call, ring tone is possible on SuperTooth II and at the same time on the telephone (depending on your phone model). 1. Just shortly press Pick-Up/Hang-Up Button(7) to answer the call. 2. When communication is over, press the Pick-Up/Hang-Up Button(7) to terminate the call. MAKING A CALL USING THE SUPERTOOTH II Normal dialing 1. Enter the contact number and send. Normally, audio will be on the kit. Note: With some phones like Siemens S

Resumo do conteúdo contido na página número 7

Audio Transfer Kit to Phone Flip down the Swivel Arm (1) to 0° position (or turn off the unit). This will automatically transfer the audio from the kit to the phone. Phone to Kit For Nokia Phones: Flip up the Swivel Arm from 0° to 55° or 210° positions. This will automatically transfer the audio from phone to kit. For Other Phone Models: Flip the Swivel Arm up from 0° to 55° or 210° position Then press shortly the Pick-Up/Hang-Up Button(7). The audio will be transferred from the p

Resumo do conteúdo contido na página número 8

Specifications: Standard Bluetooth V1.I, Class II Frequency 2.4GHt Maximum communication distance Approx. 10m Operating Talk Time 15 hours Operating Standby Time 800 hours Charging Time About 3 hours Profiles supported Handsfree, Headset Battery Type Rechargeable Lithium Ion Speaker 50mm dia, High Power Neodyne type Microphone With built-in noise canceller Weight (kit without clip) 133.3 g Dimension Iwh: 138x60x25 mm Other Comments • A Full-Duples device • Compact size •