Manual do usuário ATD Tools ATD-8525

Resumo do conteúdo contido na página número 1

ATD-8525

20 GALLON PARTS WASHER INSTRUCTION
MANUAL

IMPORTANT SAFETY INSTRUCTIONS
1. Read all instructions before using this unit.
2. Care must be taken as burns can occur from touching hot parts.
3. Do not operate the equipment with a damaged cord or if the equipment
has been dropped or damaged. Return the equipment to our service
center for examination or mechanical adjustments or repair.
4. Do not let cord hang over edge of table, bench or counter or come in
contact with hot

Resumo do conteúdo contido na página número 2

8. To reduce the risk of fire, do not operate equipment in the vicinity of open containers of flammable liquids (gasoline). 9. Adequate ventilation should be provided when working on operating internal combustion engines. 10. Keep hair, loose clothing, fingers and all parts of body away from working parts. 11. To reduce the risk of electric shock, do not use on wet surfaces or expose to rain. 12. Use the equipment only as described in this manual. Use only manufacturer’s recommended att

Resumo do conteúdo contido na página número 3

ASSEMBLY INSTRUCTIONS: 1. Remove machine from carton and inspect for any visual damage. 2. Remove parts from inside the machine 3. Lay cardboard on the floor and lay machine on its lid (Make sure to hold the cover closed when laying machine on its lid.) 4. Mount four legs on brackets with M6x12 screws, Lock washers and M6 nut. NOTE: DO NOT TIGHTEN YET. 5. Place lower shelf between legs with flat surface up and attach to legs with M6X12 screws, Lock washers and M6 nuts. 6. With legs pre

Resumo do conteúdo contido na página número 4

TECHNICAL SPECIFICATIONS: Model ATD-8525 Overall Dimensions 30-3/4"X21-3/4"X35-3/4" Tank Dimensions 29-7/8"X20-3/4"X10-8/10" Max Solvent Capacity 20 Gallons Max Pump Output 5.25 gal/Min Gross Weight 63 lbs

Resumo do conteúdo contido na página número 5