Resumo do conteúdo contido na página número 1
MODEL H8124
7.2 MINI GRINDER KIT
INSTRUCTION MANUAL
COPYRIGHT © JANUARY, 2007 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TS8719 PRINTED IN CHINA
Resumo do conteúdo contido na página número 2
����������������������������������������������������������������������� �������������������������������������������������������������� ���������������������������������������������������������������������� �������������������������������������������������������������������� ������������������������ ������������������������������������������������������������������ �������������������������������������������������������������������� ���������������������������������������������������������������
Resumo do conteúdo contido na página número 3
Table of Contents SECTION 1: SAFETY .......................................................................................................2 Safety Instructions for Machinery ...............................................................................2 Additional Safety Instructions for Mini Grinder ...........................................................4 Additional Safety Instructions for Batteries and Chargers ..........................................5 SECTION 2: INTRODUCTION .........
Resumo do conteúdo contido na página número 4
SECTION 1: SAFETY For Your Own Safety Read Instruction Manual Before Operating This Equipment The purpose of safety symbols is to attract your attention to possible hazard- ous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention meas
Resumo do conteúdo contido na página número 5
7. ONLY ALLOW TRAINED AND PROP- 16. REMOVE ADJUSTING KEYS AND ERLY SUPERVISED PERSONNEL WRENCHES. Make a habit of check- TO OPERATE MACHINERY. Make ing for keys and adjusting wrenches sure operation instructions are safe before turning machinery ON. and clearly understood. 17. CHECK FOR DAMAGED PARTS 8. KEEP CHILDREN AND VISITORS BEFORE USING MACHINERY. Check AWAY. Keep all children and visitors for binding and alignment of parts, a safe distance from the work area. broken parts, part mou
Resumo do conteúdo contido na página número 6
Additional Safety Instructions for Mini Grinder 1. READ THIS MANUAL. This manual 6. SHARP SURFACES. DO NOT place contains proper operating instructions hands near the tooling surfaces of the for this grinder. grinder when in operation. 2. OPERATION. DO NOT force the 7. DISCONNECT POWER. Always remove grinder against the workpiece. Firmly the battery before making any adjust- grasp the grinder and ease it against ment, changing tools, or performing the workpiece using light pressure. any main
Resumo do conteúdo contido na página número 7
Additional Safety Instructions for Batteries and Chargers 1. CHARGING EQUIPMENT. Only charge 5. CHARGER DAMAGE. Replace char- using the charger and batteries sup- ger if it has been dropped, damaged, plied with your grinder. DO NOT use or received a hard impact. Repair cord batteries or charges from other cord- immediately if damaged. less tools. 6. SHORTING BATTERY. Avoid touch- 2. CHARGING ENVIRONMENT. Charge ing both battery terminals simultane- battery on a dry, hard surface in a ously wit
Resumo do conteúdo contido na página número 8
SECTION 2: INTRODUCTION Foreword Contact Information We are proud to offer the Grizzly Model If you have any comments regarding this H8124 7.2V Mini Grinder Kit. This model manual, please write to us at the following is part of a growing Grizzly family of fine address: power tools. When used according to the guidelines set forth in this manual, you Grizzly Industrial, Inc. can expect years of trouble-free, enjoyable C/O Technical Documentation operation and proof of Grizzly’s commit- P.O. Bo
Resumo do conteúdo contido na página número 9
SECTION 3: INVENTORY Your Model H8124 was carefully packed when it left our warehouse. If you discover the Model H8124 is damaged after you have signed for delivery, please call Customer Service immediately at (570) 546-9663 for advice. Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult. When you are completely satisfied with the condition of the shipment, you should inventory the equipment. T
Resumo do conteúdo contido na página número 10
SECTION 4: OPERATIONS 5. Plug the AC/DC adapter into a 110- 120V power outlet. —The green light on the battery char- ger will light when the battery char- ger is receiving power. —The red light on the battery charger will light when a mounted battery is charging. Read the manual before operation. 1 6. After 3–3 ⁄2 hours in the energized char- Become familiar with this machine, its ger, the battery will be fully charged. safety instructions, and its operation Remove the battery from the cha
Resumo do conteúdo contido na página número 11
to install a bit Using the LED Gooseneck Work Light The LED gooseneck work light is a hands- DO NOT use bits or cutters with a free solution to illuminating low light opera- cutting diameter larger than 1". The bit or cutter could break apart under tions. the stresses of high speed use caus- ing serious personal injury. To use the LED gooseneck work light: To install a bit: 1. DISCONNECT THE BATTERY CHARGER FROM THE AC/DC 1. REMOVE THE BATTERY FROM THE ADAPTER! GRINDER! 2. Mount a charged
Resumo do conteúdo contido na página número 12
High Speed Uses The high speed setting is best for gen- eral carving, cutting, routing, and grinding. Failure to wear ANSI approved safety glasses while operating the grinder The bit removes material more quickly at could cause serious personal eye higher speed. injury. Low Speed Uses Using the Grinder The lower speed setting is best for grind- Most operations performed with the Model ing and cutting materials that have low H8124 will give the best results at the high melting points. Plas
Resumo do conteúdo contido na página número 13
SECTION 5: PARTS LIST 4 5 3 2 1 6 16 18 7 12 9 13 8 14 10 19 17 11 15 23 20 21 24 22 REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PH8124001 CARRYING CASE 13 PH8124013 COLLET 1/8" 2 PH8124002 SANDING DISC SET 14 PH8124014 TAP SCREW 2 X 5 3 PH8124003 ACCESSORY KIT 15 PH8124015 SWITCH COVER 4 PH8124004 MOUNTED STONE SET 16 PH8124016 COLLET NUT 5 PH8124005 ASSORTED BIT SET 17 PH8124017 GRINDER MOTOR/SPINDLE ASSY 6 PH8124006 COLLET NUT WRENCH 18 PH8124018 HOUSING BACK HALF 7 PH8124007 COLLET SHIE
Resumo do conteúdo contido na página número 14
WARRANTY AND RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly’s sole written warranty and any and all warranties that may be implied by law, including any merchantability or fitness, for any particular purpose, are hereby limited to
Resumo do conteúdo contido na página número 15
WARRANTY CARD Name _________________________________________________________________ Street _________________________________________________________________ City _______________________ State _________________________ Zip _________ Phone # ____________________ Email ________________________ Invoice # _____ Model # ____________________ Order # _______________________ Serial # ______ The following information is given on a voluntary basis. It will be used for marketing purposes to help us develo
Resumo do conteúdo contido na página número 16
Send a Grizzly Catalog to a friend: Name________________________________ Street________________________________ City______________State______Zip_______ FOLD ALONG DOTTED LINE Place Stamp Here GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE
