Manual do usuário North Star 165959

Resumo do conteúdo contido na página número 1

PTO Generator Trailer
ITEM # 165959
For use on 13000, 27500, and
60000 PTOG North Star
Generators or Other PTO
P rove n P e rf o r m a nce
Generators up to 60kW.

M165959A
PLACE MANUAL NAMEPLATE HERE
OWNER’S MANUAL
00641
Any Questions, Comments, or Problems?
Call Customer Service at 1-800-270-0810
Hours: Monday - Friday 7:30 AM to 5:30 PM
Saturday 7:30 to 11:30 AM CST

Resumo do conteúdo contido na página número 2

THANK YOU Thank you for purchasing a NorthStar PTO Trailer. Your trailer is designed for long life, dependability, and the top performance you demand. Please take time now to read through this manual so you can better understand the machine’s operation and safety precautions. Everyone who uses this trailer must read and understand this manual. Enjoy the exceptional performance of your NorthStar PTO Trailer. IMPORTANT Make certain the operator: - Reads and understands the manuals pertaining to

Resumo do conteúdo contido na página número 3

STEP 1 • Open hardware bag and separate the components. FASTENERS (actual size) 1/2-13 Ny-Loc Nut 1/2-13 X 1.25” Long Qty. 10 Hex Head Bolt Qty. 8 1/2” Flat Washer Qty. 18 3/8-16 Hex Nut 3/8-16 Ny-Loc Wing Nut 1/2-20 X 1.25” Long 3/8” Flat Washer Qty. 2 Qty. 6 Carriage Bolt Qty. 2 Qty. 6 MISCELLANEOUS COMPONENTS (not actual size) Lug Bolts Qty. 10 Red Reflector Qty. 2 Amber Reflector PTO Implement Cord Hooks Hitch Pin With Chain Shaft Retainer Qty. 2 and Lynch Pin Qty. 2 Qty. 2 Qty. 1 00672

Resumo do conteúdo contido na página número 4

STEP 2 • Remove remaining components from the box. Discard unpainted shipping bracket. Place trailer Base on two supports at least twelve(12) inches high. 00673 STEP 3 • Bolt the Axle to the Base with (6) 1/2”-13 x 1.25 hex head bolts, (12) 1/2” flat washers, and (6) 1/2-13 Ny-Loc nuts. 00674 4

Resumo do conteúdo contido na página número 5

STEP 4 • Assemble Tongue Arm to Base with (2) 1/2-13 X 1.25” hex head bolts, (4) 1/2 Flat Washers, and (2) 1/2-13 Ny-Loc Nuts. Assemble Tongue to Tongue Arm with (2) 1/2-13 X 1.25 Carriage bolts, (2) 1/2 flat washers, and (2) 1/2-13 Ny-Loc nuts. Note: The Tongue Arm and Tongue is adjustable to fit many different PTO Generators and PTO Implement Shafts. You may need to adjust the Tongue to fit your implement shaft. The Tongue Arm pivots and is adjustable to fit different PTO Generators, if

Resumo do conteúdo contido na página número 6

STEP 6 • Apply the (2) red reflectors to the rear of the trailer and (2) amber reflectors to front sides of the trailer as shown. Assemble the (2) cord hooks to the trailer with (2) 3/8-16 hex nuts, (2) 3/8 flat washers, and (2) 3/8- 16 Ny-Loc wing nuts. Assemble the (2) PTO Implement shaft retainer to the trailer with (4) 3/8 flat washers, and (4) 3/8-16 Ny-Loc wing nuts. Discard any remaining fasteners. 00677 STEP 7 • Mount NorthStar PTO Generators to trailer using one of the three followi