Resumo do conteúdo contido na página número 1
Smart-DTA™
ISDN VoIP Telephone Adapter
Quick Start Guide
Important—This is a Class A device and is intended for use in a light industrial environment. It is not
intended nor approved for use in an industrial or residential environment.
Caution—This device is not intended nor approved for connection to the public ISDN telecommuni-
cation network.
Attention—Ce dispositif n'est pas prévu ni approuvé pour le raccordement au réseau de
télécommunication public le RNIS.
Vorsicht—Die
Resumo do conteúdo contido na página número 2
• The Smart-DTA contains no user serviceable parts. The equipment shall be returned to Patton Electronics for repairs, or repaired by qualified service personnel. WARNING • Mains Voltage: Do not open the case the power cord is attached. The external power adaptor shall be a listed limited power source that incorporates a disconnect device and shall be positioned within easy reach of the operator. The mains outlet shall be within 10 feet (3 meters) of the device, shall be easily
Resumo do conteúdo contido na página número 3
2.0 Connect the Smart-DTA to your local network You must connect the Smart-DTA to an IP network that provides a DHCP server. Using the included black Ethernet cable, connect the Smart-DTA RJ-45 Ethernet WAN port, labeled ETH (see figure 1), to an Ethernet hub or switch on the same network as your PC. The Ethernet WAN interface is configured as a DHCP client. Smart-DTA DHCP Server ETH port PC Ethernet Hub or Switch Figure 1. Connecting the Smart-DTA to the network via a hub or switch
Resumo do conteúdo contido na página número 4
3.0 Connect the Smart-DTA to an ISDN phone 1. Using a straight-though cable, terminated with RJ-45 connectors, connect the BRI port of your Smart-DTA to the S/T port of your ISDN phone, as shown below: ISDN Phone RJ-45, male RJ-45, male 3 3 4 4 5 5 6 6 Note: Other pins are not used. 4 Smart-DTA Quick Start Guide
Resumo do conteúdo contido na página número 5
4.0 Start the SmartNode Discovery Tool 1. Insert the CD included with your Smart-DTA into the CD drive on your PC. 2. Copy the file named SNDiscovery.exe from the CD to your PC. 3. At your PC, double-click the SNDiscovery.exe file name to activate the tool. The SmartNode Discovery Tool window will display the IP Address, MAC Address, Device Type (model number) and Build (software release) of your Smart-DTA. If your Smart-DTA does not appear: • Make sure the Smart-DT
Resumo do conteúdo contido na página número 6
2. Right-click the selected line, and select Webbrowser. The Login window will display. Figure 3. Login window 3. Enter the username administrator. Do not enter a password. Instead simply click OK. Your web browser will display the Smart-DTA home page. Figure 4. Smart-DTA home page 6.0 Configuring your Smart-DTA Once you have logged in you can use the browser-based graphical user interface (GUI) to configure and manage your S-DTA. The Smart-DTA home page displays thre
Resumo do conteúdo contido na página número 7
The GUI consists of the following main elements: • The “Navigation Bar” on the left edge presents you with a menu listing giving access to the various configura- tion and status pages of the Smart-DTA. • At the top of the page you see the “Current System Path” which displays the location and element currently presented in the main area. • The rest of the page displays the configuration and status information for the different features of the Smart-DTA. Whenev
Resumo do conteúdo contido na página número 8
B.0 Appendix—Factory default IP addresses Factory default IP addresses and netmask configuration. IP Address Network mask WAN interface Ethernet 0 (0/0) DHCP Client n/a LAN interface Ethernet 1 (0/1) 192.168.1.1 255.255.255.0 DHCP server address range (LAN) 192.168.1.10-192.168.1.99 255.255.255.0 C.0 Compliance Information C.1 Compliance EMC Compliance: • FCC Part 15, Class A • EN55022, Class A • EN55024 Safety Compliance: • IEC 60950-1 • EN60950-1 C.2 Radio and TV i
Resumo do conteúdo contido na página número 9
C.3 EC Declaration of Conformity (See section C.4 “EG-Konformitätserklärung” for German version.) Product Description: Smart-DTA The products described above in the form as delivered are in conformity with the provisions of the following European Directive: R&TTE Directive 1999/5/EC Guidelines of the European Parliament and the Committee for the Harmonization of the Legal Regu- lations of the Member States concerning radio equipment and telecommunications terminal equip
Resumo do conteúdo contido na página número 10
NOTES ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ______
Resumo do conteúdo contido na página número 11
NOTES ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ______
Resumo do conteúdo contido na página número 12
Copyright statement Copyright © 2007, Patton Electronics Company. All rights reserved. The information in this document is subject to change without notice. Patton Electronics assumes no liability for errors that may appear in this document. Trademarks statement The term Smart-DTA is a trademark of Patton Electronics Company. All other trademarks presented in this docu- ment are the property of their respective owners. Warranty For warranty information, refer to the Smart-DTA G