Resumo do conteúdo contido na página número 1
SHERWOOD INDUSTRIES IS AN ENVIRONMENTALLY RESPONSIBLE COMPANY. THIS MANUAL IS PRINTED ON RECYCLED PAPER.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Venice
Wood Stove
B Y : S H E R W O O D I N D U S T R I E S L T D
OWNER’S MANUAL
Models: 1200-V & 1700-V Insert
Contact your local building or fire officials,
INSTALLER:
Leave this manual with the wood stove.
or the authority having jurisdiction about
restrictions and installation inspection
CONSUMER:
Retain this manual for future refe
Resumo do conteúdo contido na página número 2
Table of Contents Safety Precautions..........................................................................................3 Operating Instructions.....................................................................................4 Building Your Fire.................................................................................5 How It Works......................................................................................9 Specifications................................................
Resumo do conteúdo contido na página número 3
Safety Precautions FOR SAFE INSTALLATION AND OPERATION OF YOUR “ENVIRO” WOOD STOVE, PLEASE CAREFULLY READ THE FOLLOWING INFORMATION: ● Please read this entire manual before you install and use your new woodstove. Failure to follow instructions may result in property damage, bodily injury or even death. Be aware that local Codes and Regulations may override some items in this manual. Check with your local inspector. ● If this appliance is not properly installed, operated and maintained, a ser
Resumo do conteúdo contido na página número 4
Operating Instructions FIRST START When first installed, the chimney, firebricks and steel are cold and it usually takes several hours on a fairly high burn for them to become hot and dry enough for the stove to function well. We recommend during the unit’s first burn that a door and window are opened to vent the smoke and fumes created from the unit’s paint curing. The paint will smell a little for the first burn or two as it cures. DISPOSAL OF ASHES: If you let the ashes accumulate two or t
Resumo do conteúdo contido na página número 5
Operating Instructions CREOSOTE - ITS FORMATION AND REMOVAL: When wood is burned slowly, it may produce tar and other vapors that, combined with moisture, form creosote. These vapors condense in the relatively cooler chimney flue of a slow burning fire and, if ignited, make an extremely hot fire. Therefore, the smoke pipe and chimney should be inspected bi- weekly during the heating season to determine if a build-up has occurred. If creosote has accumulated it should be removed to reduce the
Resumo do conteúdo contido na página número 6
Operating Instructions d) Regulate the heat output of the stove by adjusting the air controls to allow a larger fire and vice versa. A short period of experimentation with the control settings will allow you to regulate the heat output to keep your home comfortable. Do not use a grate or elevate the fire. Build wood fire on the stove firebox hearth floor. 3. Refueling the Stove: Use a long pair of gloves (barbecue gloves) when feeding the fire because these stoves burn at the front. They are
Resumo do conteúdo contido na página número 7
Operating Instructions g) Once the kindling has started to burn, add some smaller pieces of seasoned, dry firewood. Note: Adding large pieces at the early stages will only serve to smother the fire. Continue adding small pieces of seasoned dry firewood, keeping the door slightly open until each piece starts to ignite. Remember to always open the door slowly between placing wood into the fire. h) Once the wood has started to ignite and the smoke has reduced, close the wood stove door fully. Th
Resumo do conteúdo contido na página número 8
Operating Instructions 7. What is draft? Draft is the ability of the chimney to exhaust or draw smoke produced during the normal combustion process. Too much draft may cause excessive temperatures in the appliance and may damage the appliance. Inadequate draft may cause backpuffing or “plugging” of the chimney. There is a certain amount of draft that is required to allow for your stove to function at its’ highest efficiency. A water column gauge can be used to reference this amount. 8. What
Resumo do conteúdo contido na página número 9
Operating Instructions HOW IT WORKS: E x h a u s t S m o ke C o n v ec t io n H e a t 1 / 2 " C e r am ic b a f f le ; r ef le ct s h e a t d o w n t o b u r n t h e p ar t icl es P r i m a r y a i r ; win d o w i n t h e sm o ke. a i r w as h ( c o o l er a i r t o k e e p t h e g l as s c le an ) . S eco n d ar y air t u bes ; c r e a t es a s eco n d b ur n o n t h e p a r t ic l e s in t he sm o ke f o r a m o r e ef f icien t & cl ea n er b ur n . R a d ian t H ea t P i l o t air t h r o u
Resumo do conteúdo contido na página número 10
Specifications AIR CONTROL: The air wash and pilot air (control the amount of air to the fire) are controlled by the rod located on the right side of the unit. To increase your air, pull the rod out and to decrease, push the rod in. All the units have a secondary air that flows through the tubes at the top of the firebox, just below the baffles. Pull this control all the way out when first starting the stove. Once the fire has been established you may adjust this control to set the burn rat
Resumo do conteúdo contido na página número 11
Specifications CLEARANCES TO COMBUSTIBLES - 1200-V INSERT: Table 2: 1200-V Insert Clearance to Combustibles. A Minimum clearance to an unshielded side wall 10” (254 mm) B Minimum clearance to an unshielded 8” (203 21” (533 mm) mm) mantel C Minimum top facing (protruding 3⁄4” [19 mm]) 171⁄2” (445 mm) � � clearance D Minimum side facing (protruding 3⁄4” [19 mm]) � 1” (25 mm) clearance � E † From front of door opening to edge of floor USA 16” (406 mm) protection CND 18” (450 mm) � � F † From sid
Resumo do conteúdo contido na página número 12
Specifications CLEARANCES TO COMBUSTIBLES - 1700-V INSERT: Table 5: 1700-V Insert Clearance to Combustibles. A Minimum clearance to an unshielded side wall 10” (254 mm) B Minimum clearance to an unshielded 8” (203 24” (610 mm) mm) mantel C Minimum top facing (protruding 3⁄4” [19 191⁄2” (495 mm) � � mm]) clearance D Minimum side facing (protruding 3⁄4” [19 � 1” (25 mm) mm]) clearance � E † From front of door opening to edge of floor USA 16” (406 mm) protection CND 18” (450 mm) � �
Resumo do conteúdo contido na página número 13
Specifications DIMENSIONS - 1200-V INSERT: 13 5 2 2 / 16 " ( 5 6 6 m m ) 13 3 4 / 16 " ( 8 8 5 m m ) 9 2 1 / 16 " ( 54 8 m m ) 3 4 7 / 8 " ( 1 2 0 3 m m ) 5 1 3 / 16 " ( 3 3 8 m m ) 5 " ( 12 7m m ) 15 26 / 16 " 1 1 9 / 16 " ( 6 84m m ) ( 484 m m ) 7 2 0 / 8 " o r 7 ( 52 9m m ) 2 0 / 8 " 9 1 9 / 16 " ( 530 m m ) ( 497 m m ) 1 2 0 / 16 " ( 509 m m ) 1 5 21 / 16 " ( 5 5 7m m ) Figure 4: 1200-V Insert Dimensions.
Resumo do conteúdo contido na página número 14
5 2 2 / 16 " ( 566m m ) 13 34 / 16 " ( 88 5m m ) 1 26 / 8 " ( 6 63 m m ) 3 47 / 8 " ( 1 2 0 3m m ) 7 1 7 / 1 6 " ( 4 5 3 m m ) 5 " ( 12 7 m m ) 15 26 / 16 " ( 684m m ) 1 1 9 / 1 6 " ( 4 84 m m ) 7 2 0 / 8 " 7 o r 2 0 / 8 " ( 5 2 9 m m ) 9 1 9 / 1 6 " ( 53 0m m ) ( 4 97 m m ) 9 2 4 / 16 " ( 62 4m m ) 1 2 6 / 2 " ( 67 2 m m ) Figure 5: 1700-V Insert Dimensions. Specifications DIMENSIONS - 1700-V INSERT: 14
Resumo do conteúdo contido na página número 15
Installation Please read and understand these instructions before installing pedestal or ash pan and leg option. Failure to follow these instructions carefully could cause personal injury or property damage. All screws are pre-installed on the base of the unit. REMOVAL FROM PALLET: • Remove the bricks from the unit before starting. • Remove the two (2) lag bolts (shown in Figure 6) that secure the unit to the pallet from inside the firebox. Note: Before the bricks are installed, rivets (Fig
Resumo do conteúdo contido na página número 16
Installation MASONRY FIREPLACE INSTALLATION: Unless you are experienced, we recommend installation by your dealer or a professional installer. Install only in a masonry fireplace with a good-condition chimney at least 15 ft (4.6 m) high, both of which have been constructed in accordance with the building code. Refer to Tables 4 and 7 for minimum masonry fireplace dimensions. Be sure the fireplace and chimney are clean and sound without any cracks or loose mortar. Do not remove any bricks or
Resumo do conteúdo contido na página número 17
Installation The flue collar is removable for installations into fireplaces with low openings. a) Remove the rear two (2) secondary air tube and C-Cast Ceramic Baffles, if installed (see C-CAST CERAMIC BAFFLE INSTALLATION). Remove the secondary air tubes by placing a screwdriver (any style except flat head) into one of the air holes and tapping it with a hammer/mallet to U S A 16” ( 4 0 6 m m ) the left. C N D 1 8” ( 4 50 m m ) 8 " b) Unscrew the two (2) nuts on top of the F l oo r P r
Resumo do conteúdo contido na página número 18
Installation Figure 14: Removable flue collar in place. 4. Screw or nail the provided metal plate with the wording “THIS FIREPLACE HAS BEEN ALTERED TO ACCOMMODATE A FIREPLACE INSERT AND SHOULD BE INSPECTED BY A QUALIFIED PERSON L e v el i n g L e g s PRIOR TO THE RE-USE AS A CONVENTIONAL Figure 15: Leveling legs. FIREPLACE.” to the inside of the fireplace. SURROUND PANEL SEALED INSTALLATION FOR USA ONLY: Note: Though this is an allowable installation, we do not recommend it because of the p
Resumo do conteúdo contido na página número 19
Installation INSTALLATION USING A BLOCK-OFF PLATE FOR USA ONLY: If this unit is to be installed into a masonry fireplace or a zero-clearance fireplace with a direct connection you must install a non-combustible seal-off device such as a block-off plate or damper adapter. By installing a block-off plate you seal the chimney, ensuring that no smoke enters the home and sealing the chimney to encourage draft. To construct a block-off plate follow the below steps. 1. Determine where the block-off
Resumo do conteúdo contido na página número 20
Installation 5. Mount the block-off plate using masonry screws in a masonry fireplace and sheet metal screws on a zero- clearance fireplace (screws M a nt e l need only be long enough to penetrate the first layer of S ta i n l e s s s te e l c h i m ney metal). D a m pe r m u s t c o n n e c to r m u s t e x t end b e r em o v e d 1 2 " ( 3 0 5 m m ) p a s t the 6. Insulate the block-off plate b l o c k - o f f p l a te . using high - temperature B l ock - o f f pl at e o r fiberglass i
