Manual do usuário Hunter Fan 42996

Resumo do conteúdo contido na página número 1

INSTALLATION
Mount Wallplate and Thermostat
JUST RIGHT
• Remove the wallplate from your thermostat by pressing the release tab on
®
DIGITAL THERMOSTAT
the bottom of the thermostat. See Figure 2.
What You Need
This thermostat includes two #8 slotted screws and two wall anchors
for mounting. To install your thermostat, you should have the fol-
lowing tools and materials.
• Slotted Screwdriver(s)
• Small Philips screwdriver
• Hammer
• Electric drill and 3/16” bit
• Two 1.5 V (AA) size al

Resumo do conteúdo contido na página número 2

ON DIP 1 2 3 4 Selector Switches (See Figure 6) Setting New Temperature Remote Operation Use the switches on the back of the thermostat and in the remote control to You can use the remote control (12 volt battery not included) that came with • Press either the up or down key and hold for longer match the thermostat to your system (either gas or electric), choose between your thermostat to adjust the temperature setting. Press the “+” side of the than 1 second. temperature readout (either