Manual do usuário Friedrich RT2

Resumo do conteúdo contido na página número 1

Model RT2
Installation Instructions
SINGLE STAGE HEAT/COOL THERMOSTAT
Please read these instructions completely before attempting installation.

WARNING
Increase
Temperature
Before installing thermostat, turn off all power
to unit. There may be more than one power
3.30
disconnect. Electrical shock can cause per-
Decrease
sonal injury or death.
Temperature
0.8
Improper wiring or installation may damage
thermostat. Wiring must conform to local and
Selects System Mode: Turns Continuous F

Resumo do conteúdo contido na página número 2

5. Drill two 3/16-in. mounting holes in wall where marked. III CHECK THERMOSTAT OPERATION (Note: Mounting holes on back plate are designed to fi t on a 1. Fan Operation horizontal J-box). A. Press fan button, starting fan operation. Fan icon turns on. B. Press Fan button, stopping fan operation. Fan icon turns off. 1.587 2. Heating Operation 2.375 A. Press and Release MODE button until HEAT is dis- played. B. Press up button until LCD readout reads 10 degrees above room temperatu

Resumo do conteúdo contido na página número 3

V. THERMOSTAT CONFIGURATION This thermostat has been carefully confi gured at the factory to provide 4. Use up and down buttons to change between F and C. optimum operation for most installations. The settings programmed 5. Press MODE button to return to d. Up and down buttons into it at the factory should NOT be changed unless determined to now move between option choices; or press FAN button be absolutely necessary by a qualifi ed HVAC contractor. to exit confi guration mode. VI. CHANGING T

Resumo do conteúdo contido na página número 4

FRIEDRICH AIR CONDITIONING CO. INC. Post Offi ce Box 1540 · San Antonio, Texas 78295-1540 4200 N. Pan Am Expressway · San Antonio, Texas 78218-5212 (210) 357-4400 · FAX (210) 357-4480 www.friedrich.com Printed in the U.S.A. 920-162-01 (5-05)