Resumo do conteúdo contido na página número 1
1WMPD4001917
Resumo do conteúdo contido na página número 2
This manual and Marks All safety messages are identified by the following, “WARNING” or “CAUTION”, of ANSI Z535.4 (American National Standard Institute: Product Safety Signs and Labels). The meanings are as follows: A potentially hazardous situation which, if not avoided, could result WARNING in death or serious injury. A potentially hazardous situation which, if not avoided, may result in CAUTION minor or moderate injury. This is a hazard alert mark. Note This m
Resumo do conteúdo contido na página número 3
CONTENTS 1. INTRODUCTION .............................................................................................................3 2. UNPACKING ...................................................................................................................3 3. PART NAMES AND FUNCTIONS...................................................................................4 4. SETTING UP ........................................................................................................
Resumo do conteúdo contido na página número 4
11. MAINTENANCE ..........................................................................................................34 11-1. Notes on maintenance ...............................................................................................................34 11-2. Error codes ................................................................................................................................34 12. SPECIFICATIONS................................................................
Resumo do conteúdo contido na página número 5
1. INTRODUCTION This manual describes how this balance works and how to get the most out of it in terms of performance. EJ series balances have the following features: The EJ series are high-resolution type electronic balances having a display resolution of 1/12,000 ~ 1/60,000. The balance has a counting function, % function and a comparator function. The backlight LCD will help with use in a dimly lighted place. The balance can be operated with an AC adapter, or 4 x “AA” size
Resumo do conteúdo contido na página número 6
3. PART NAMES AND FUNCTIONS Battery indicator ACAI indicator Comparator results Specific gravity STABLE indicator STABLE NET indicator Weighing NET units ZERO indicator ZERO Weighing pan ON:OFF key Round pan for EJ-120 / EJ-200 / EJ-300 / EJ-410 / EJ-610. Spirit level LCD Leveling foot SAMPLE key Calibration switch cover PRINT key AC adapter jack (bottom) UNITS key RE-ZERO key EJ-02 / EJ-03 slot
Resumo do conteúdo contido na página número 7
4. SETTING UP 4-1. Setting up your balance 1. Place the weighing pan on the main unit as shown in “2. UNPACKING”. 2. Adjust the level of the balance using the leveling feet. Use the spirit level to confirm. The bubble should be in the center of the circle. 3. Calibrate your balance before use. (See “7. CALIBRATION”) Balance location To measure correctly, to keep the balance in good condition, and to prevent hazards, observe the following: Do not install the balance in locations t
Resumo do conteúdo contido na página número 8
Remove batteries when the balance is not to be used for a long time. They may leak and cause damage to the balance. Damage due to battery leakage is not covered by the warranty. Installing batteries 1. Turn off the balance and disconnect the AC adapter if used. 2. Slide the battery cover off. 3. Push the battery box up to unhook and pull it out. 4. Insert new four batteries (LR6 / R6P / AA size) into the battery box, taking extreme care of the polarities. 5. Push the battery box int
Resumo do conteúdo contido na página número 9
5. OPERATION 5-1. Turn the power ON and OFF 1. Press the ON:OFF key to turn the power ON. STABLE Weighing NET units ZERO All of the symbols are displayed as shown above. (About units: Only the units available will be displayed.) The display turns off except for a weighing unit and the decimal point. The balance waits for the weighing data to become stable, and zero will be displayed with the ZERO indicator (power-on zero). The range for power-on zero is within
Resumo do conteúdo contido na página número 10
5-3. Units The most common unit of weight used around the world is the gram, but there is often a need to shift to alternative units specific to the country where the balance is used or to select modes such as counting or percent. The units and the order they appear in the display are as follows: Pound Ounce (avoir) Metric carat Percent mode Momme Counting mode Pennyweight Gram Grain Newton Density (specific gravity) Among the units, those available for t
Resumo do conteúdo contido na página número 11
5-4. Selecting a weighing unit Press the UNITS key to select a unit. The following sections are a description of the Each pressing switches the three common units: g (gram mode), pcs (counting units available in the order described on the previous mode), and % (percent mode). page. 00 . ZERO STABLE indicator 5-5. Basic operation Container 1. Select a weighing unit. 2. When the display does not show zero, press the RE-ZERO key to set the display to zero.
Resumo do conteúdo contido na página número 12
5-6. Counting mode (pcs) Weighs the sample pieces and calculate its unit weight. Using the sample unit weight, the scale counts the number of parts or items. As for the minimum unit weight acceptable, see the function setting “Umin”. Selecting the counting mode 0 1. Press the UNITS key to select . ( :pieces) Storing the sample unit 2. Press the SAMPLE key to enter the sample unit weight storing mode. 10 - 3. To select the number of samples, press the 1SA
Resumo do conteúdo contido na página número 13
9. The balance re-calculates the unit weight while the ACAI indicator is blinking. Do not touch the balance or samples on the pan until the ACAI indicator turns off. 10. Counting accuracy is improved when the ACAI indicator turns off. Each time the above operation is performed, a more accurate unit weight will be obtained. There is no definite upper limit of ACAI range for the number of samples exceeding 100. Try to add the similar number of samples as displayed. 5-7. Percent mode
Resumo do conteúdo contido na página número 14
6. COMPARATOR The results of the comparison are indicated by HI, OK or LO on the display. The comparison is as follows: LO < Lower limit value ≤ OK ≤ Upper limit value < HI Operating conditions (see the function setting “Cp”): No comparison (comparator function disabled). Compares all data. Compares all stable data. Compares plus data except those near zero (plus data greater than +4d). Compares stable plus data except those near zero (stable plus data greater than +4d). Co
Resumo do conteúdo contido na página número 15
Entering the upper and lower limit values 6. With Cp Hi displayed, press the PRINT key. Cp Hi Enter the upper limit value using the following keys. SAMPLE key To select the digit blinking to change. HI RE-ZERO key To set the value of the digit selected. Hold down the key to 000000 switch the sign “+” and “-“. Set using the (“N” designates a negative relevant keys value.) HI PRINT key To store the value and proceed to the next step. 001234 UNITS key To ca
Resumo do conteúdo contido na página número 16
7. CALIBRATION This function adjusts the balance for accurate weighing. Perform a calibration in the following cases. Calibration (CAL) switch When the balance is first used. When the balance has been moved. For regular calibration. Calibration (CAL) switch cover 7-1. Calibration using a weight Prepare the calibration weight (sold separately) in advance. Press and hold 1. Warm up the balance for at least half an hour with the CAL switch. nothing on the p
Resumo do conteúdo contido na página número 17
5. At step 3, pressing the PRINT key to weigh the With nothing zero-point value. Do not touch the pan during on the pan weighing. To store Cal 0 50000 . 6. Place the calibration weight with the same value as Calibration displayed on the pan. Press the PRINT key to weight weigh it. Do not touch the pan during weighing. To store 5000.0 7. end appears. Remove the weight from the pan. 0end000 When the GLP output (function setting “
Resumo do conteúdo contido na página número 18
7-2. Gravity acceleration correction When the balance is first used or has been moved to a different place, it should be calibrated using a calibration weight. But if the calibration weight cannot be prepared, the gravity acceleration correction will compensate the balance. Change the gravity acceleration value of the balance to the value of the area where the balance will be used. See the gravity acceleration map appended to the end of this manual. Note Gravity acceleration corre
Resumo do conteúdo contido na página número 19
8. FUNCTIONS 8-1. Key operation Cancels the operation and turns off the balance. Item key Selects a class and an item. In the weighing mode, press and hold the key to enter the function setting mode. Enter key Proceeds to the selected class. Stores the settings per class and goes to the next class. Parameter key Selects a parameter. Cancel key Cancels the operation, and goes to the next class or returns to the weighing mode. 8-2. Entering the function setting
Resumo do conteúdo contido na página número 20
8-3. Setting example To set auto power-off function to “Enabled”, and the ACAI function to “Disabled”. 1. Press and hold the SAMPLE key to display Press and hold func . func 2. Press the PRINT key. The balance displays poff 0 . poff 0 Each pressing 3. Press the RE-ZERO key to display poff 1 . switches the parameter poff 1 4. Press the SAMPLE key several times to display To confirm aCai 1 . aCai 1 5. Press the RE-ZERO key to
