Manual do usuário Cabela's 07-3601-A

Resumo do conteúdo contido na página número 1

ATTENTION
If any components of this unit are broken or
the unit does not operate properly, please
MANUAL
contact Cabela’s Customer Service.
JERKY SLICER
Retail Store Purchases: 1-800-905-2731 (U.S. & Canada)
Catalog and Internet Purchases: 1-800-237-8888
INSTRUCTIONS
All International: 1-308-234-5555
MODEL # 07-3601-A
DO NOT RETURN THE UNIT TO THE STORE
WHERE IT WAS PURCHASED!
REV 032309

Resumo do conteúdo contido na página número 2

DIRECTIONS FOR USE • Remove all bones or hard items in the meat before slicing. Damage to the unit may occur if bones or hard objects are pushed through. MANUAL • Do not slice meat that is more than 1” (2.5 cm) thick. Thicker meat may get JERKY SLICER lodged in Blades, which may cause damage to the product. MODEL # 07-3601-A • Insert the meat to be sliced into the mouth of the Chute until the meat comes in contact with the Blades. Turn the Handle in a clockwise motion. This will pull COMPO

Resumo do conteúdo contido na página número 3

DISASSEMBLY & CLEANING INSTRUCTIONS 1. Keep children at a safe distance from machine while cleaning. 2. Remove the Handle Thumbscrew from the Handle. 3. Remove Handle from the Blade Rack Assembly. 6 4. Remove the Combs from the Top Housing by lifting up on 13 Combs. 5. Remove the two Thumbscrews from the Top Housing. 5 6. Remove the Top Housing. WARNING! This will expose the Cutting Blades. Take care when handling the Blade Assembly. 7. Using the provided Allen Wrench, remove the Chute fr

Resumo do conteúdo contido na página número 4

GENERAL SAFETY RULES ASSEMBLY INSTRUCTIONS 1. Using an Allen Wrench and Screws, READ AND FULLY UNDERSTAND ALL INSTRUCTIONS AND WARNINGS PRIOR TO USING THIS UNIT. YOUR attach the Left and Right Legs to the Lower SAFETY IS MOST IMPORTANT! FAILURE TO COMPLY Housing. Figure 1 WITH PROCEDURES AND SAFE GUARDS MAY RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE. 2. Connect the Left and Right Legs to the WARNING! REMEMBER: YOUR PERSONAL SAFETY IS YOUR Base using the provided Allen Wrench and RE