Resumo do conteúdo contido na página número 1
Resumo do conteúdo contido na página número 2
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety precautions should always be followed, including the followings: Read all instructions before using this appliance. DANGER— To reduce the risk of electric shock: 1. An appliance should never be left unattended when plugged in. Always unplug this sewing machine from the electric outlet immediately after using and before cleaning. 2. Always unplug before replacing a sewing machine bulb. Replace bulb with same type rated
Resumo do conteúdo contido na página número 3
TABLE OF CONTENTS KNOW YOUR MACHINE.................................. 3 BASIC STITCHES (Mode 1).................................... 25 Name of Parts........................................................... 3 Straight Stitch ......................................................... 25 To sew ........................................................................ 25 Standard Accessories ............................................... 4 To sew from the edge of thick fabric ......................
Resumo do conteúdo contido na página número 4
UTILITY STITCHES AND MONOGRAMMING (Mode 4) ............................... 66 Selecting a Letter Style ........................................ 66 DECORATIVE STITCHES (Mode 3) ................... 42 Programming a Monogram .................................. 67 Buttonholes ...........................................................42 Editing a Monogram ............................................. 68 Sensor buttonholes .................................................. 43 To sew ..................
Resumo do conteúdo contido na página número 5
KNOW YOUR MACHINE 6 Name of Parts 3 1. Foot Pressure Dial 1 7 2. Thread Take-up Lever 2 4 5 3. Thread Guide 8 4. Quick Reference Board 5. Speed Control Lever 9 6. Retractable Thread Guide 7. Bobbin Winder Spindle 8. Bobbin Winder Stopper 9. LCD Screen 10 10. Function Buttons 11. LCD Contrast Adjusting Dial 25 12. Drop Feed Lever 13. Knee Lifter Socket 14. Stitch Balance Adjusting Dial 24 11 15. Tension Regulating Dial 16. Thread Cutter Button 23 17. Up/Down Needle Button 18. Auto-Lock Button 19.
Resumo do conteúdo contido na página número 6
Standard Accessories 1 23 1. Zigzag Foot A (comes attached to the machine) 2. Overedge Foot C 56 4 3. Rolled Hem Foot D 4. Zipper Foot E 5. Satin Stitch Foot F 6. Blind Hem Foot G 8 9 7 7. Cording Foot H 8. Overcasting Foot M 9. Automatic Buttonhole Foot R 10. Screwdriver 11. Screwdriver 11 10 12 12. Set of Needles 13. Lint Brush 14. Seam Ripper 15. Spool Holder (Large) 16. Spool Holder (Small) 14 17. Bobbins 13 18. Quilting Bar 19. Quilting Bar for Even Feed Foot 20. Basting/Darning Foot P-2 16
Resumo do conteúdo contido na página número 7
GETTING READY TO SEW Connecting the Power Supply 1 Turn off the power switch. Insert the foot control plug into the machine socket. Insert the machine plug into the machine socket. Insert the power supply plug into the wall outlet. Turn on the power switch. 3 1 Power Switch 2 Foot Control Plug 4 3Machine Socket 4 Machine Plug 5 Power Supply Plug 6Wall Outlet 3 NOTE: 6 2 If you turn off the power switch, wait for 5 seconds before turning it on again. For Your Safety: While in operation, always ke
Resumo do conteúdo contido na página número 8
Function Buttons 1 Thread cutter button Press this button after finishing sewing and the machine 1 will trim the threads. The LED signal blinks while cutting the threads. 5 Thread Cutter Signal 5 NOTES: 2 The auto thread cutter will work well with normal sewing threads #30 or finer. 6 Use the thread cutter on the face plate to cut the specialized or thick threads if the auto thread cutter does 3 not work well. When starting the next seam, pull the needle thread to pick the bobbin thread up and d
Resumo do conteúdo contido na página número 9
3 12 45 6 10 9 8 7 11 Mode button: 1 Press this button to select the desired mode. Letter style button: 2 Press this button to change the letter style of monogram. Memory/recall button: Press this button to register or recall programmed pattern combinations. 3 The previous pattern combination will be replaced by the new combination when pressing this button after programming. The registered pattern combination will be recalled when pressing this button on the initial screen of the selected mode.
Resumo do conteúdo contido na página número 10
12 Pattern selection buttons 12 Press these buttons to select the desired pattern. In the direct selection mode (Mode 1), patterns number 01 to 10 can be directly selected by pressing the corresponding button. In other modes, enter the two-digit pattern number with the numeral buttons. 17 13 16 14 15 Auto thread cutter button: Press this button after the last memorized pattern and the machine will automatically 13 trim the threads when sewing is finished. Clear button: Press this button to dele
Resumo do conteúdo contido na página número 11
Raising and Lowering the Presser Foot The presser foot lifter raises and lowers the presser foot. You can raise the presser foot about 6 mm (1/4") higher than the normal up position by exerting more pressure when lifting the presser foot lifter. This allows for easy 1 removal of the presser foot and helps you to place thick fabrics under it. 1 Presser Foot Lifter 2 2 Presser Foot 3 Up Position 4 Extra Lift NOTE: If you start the machine with the presser foot up, the LCD screen will advise you to
Resumo do conteúdo contido na página número 12
Changing the Presser Foot CAUTION: Turn OFF the power switch before changing the foot. Always use the proper foot for the selected pattern. Wrong foot can cause the needle to break. 2 3 To snap off: Raise the needle and presser foot. Press the red button on the back of the foot holder and the foot will drop. 1 1 Red Button 2 Foot Holder 3Presser Foot To snap on: Place the presser foot so the pin on the foot lies just under 6 the groove of the foot holder. Lower the foot holder to lock the foot i
Resumo do conteúdo contido na página número 13
Variety of Presser Feet and Their Uses 1 1 Zigzag foot A: This is the most versatile foot. It can be used for various stitches including straight stitches and zigzag stitches. It is designed to achieve firm and neat seam results. 2 2 Overedge foot C: This foot is exclusively for overedging. The brush on the foot effectively prevents skipped stitches on the raw edge of fabrics. 3 3 Rolled hem foot D: This special foot is for sewing a rolled hem. The curl of the foot helps to form a hem at a const
Resumo do conteúdo contido na página número 14
Winding the Bobbin 1 Removing the bobbin Slide the hook cover plate release button to the right, and remove the hook cover plate. 2 Lift out the bobbin from the bobbin holder. 3 1 Hook Cover Plate Release Button 2 Hook Cover Plate 3 Bobbin NOTES: Avoid using a bobbin when it begins to empty since it may cause thread bunching. Always use the correct bobbin. Using a wrong bobbin may cause malfunctions. 3 Setting the spool of thread Place the spool of thread on the spool pin with the thread coming
Resumo do conteúdo contido na página número 15
Winding the bobbin 1 1 1 Pass the thread through the guide on the thread 2 guide post from behind. 1 Thread Guide Post 2 Pass the thread under the bobbin winding 2 tension disk. 2 Bobbin Winding Tension Disk 3 Thread through the hole in the bobbin from the 3 inside to the outside. 3 Bobbin Winder Spindle 3 4 4 4 Put the bobbin on the bobbin winder spindle. Push the bobbin winder stopper to the left. 4 Bobbin Winder Stopper 5 6 5 5 6 Hold the free end of the thread in your hand and press the bo
Resumo do conteúdo contido na página número 16
Inserting the bobbin 1 1Place the bobbin in the bobbin holder with the thread running off counterclockwise. 1 1 Thread 2 Bobbin Holder 2 2 2 Guide the thread into notch (A) on the front of the bobbin holder. (A) 3 (B) 3Draw the thread to the left, sliding it between the tension spring blades. 4 4Continue to draw the thread lightly until the thread slips into side notch (B). The bobbin should turn counterclockwise when pulling the bobbin thread. If not, reverse the bobbin and re-thread. (B) 5 5 P
Resumo do conteúdo contido na página número 17
Threading the Machine 1 4 Raise the presser foot lifter. Press the up/down needle 3 1 button twice to raise the needle to its highest position. 2 2 1 Pass the thread through the guide on the thread guide bar from behind. 1 Thread Guide Bar 2 Pass the thread through the right thread guide. 2 Right Thread Guide 3 3 Hold the upper thread with both hands as shown 3 and slip it under the thread guide plate. 3 Thread Guide Plate 4 4 Draw the thread toward you and pass it into the left thread guide. Dr
Resumo do conteúdo contido na página número 18
Threading the Machine (continued) 6 8 5 7 9 5Draw the thread down and around the tension dial from the right to the left. Pull the thread up 5 to insert it between the tension disks and under the loop of the check spring. Be sure that the thread is coming out from notch of the disk. 5 Check Spring 6 Notch 6 5 6Firmly draw the thread up to the take-up lever and down into its eye from the right to the left, 6 7 while holding the thread at the spool. 7 Eye of the Thread Take-up Lever 7Draw the thre
Resumo do conteúdo contido na página número 19
Automatic Needle Threader 1 2 3 1 1Raise the needle to its highest position by pressing the up/down needle button twice. 2Turn the power switch off. 3 Lower the presser foot. 1 Up/Down Needle Button 4 Depress the needle threader knob as far as it will 4 go. The hook comes out through the needle eye from behind. 2 Needle Threader Knob 3 Hook 2 3 5 Draw the thread down around the threader guide 5 and under the hook. 4 Threader Guide 3 4 6Release the threader knob slowly while holding 6 the thread
Resumo do conteúdo contido na página número 20
Drawing Up the Bobbin Thread 1 1Raise the Presser Foot Lifter. Hold the needle thread with your finger and press the up/down needle button twice to pick up the bobbin thread. 2 1 Needle Thread 2 Needle Up/Down Button 1 2 Draw up the needle thread to bring up a loop of the bobbin thread. 2 3 Bobbin Thread 1 3 3 3 Slide 10 cm (4") of both threads to the back under the presser foot. 1 3 18
