Manual do usuário Grizzly H8192

Manual para o dispositivo Grizzly H8192

Dispositivo: Grizzly H8192
Categoria: Moedor
Fabricante: Grizzly
Tamanho: 6.72 MB
Data de adição: 4/3/2013
Número de páginas: 36
Imprimir o manual

Baixar

Como usar?

Nosso objetivo é fornecer-lhe o mais rapidamente possível o acesso ao conteúdo contido no manual de instruções para Grizzly H8192. Usando a pré-visualização online, você pode visualizar rapidamente o índice e ir para a página onde você vai encontrar a solução para seu problema com Grizzly H8192.

Para sua conveniência

Se a consulta dos manuais Grizzly H8192 diretamente no site não for conveniente para você, você tem duas soluções possíveis:

  • Visualização em tela cheia - Para visualizar facilmente o manual do usuário (sem baixá-lo para seu computador), você pode usar o modo de tela cheia. Para começar a visualização do manual Grizzly H8192 no modo de tela cheia, use o botão Tela cheia.
  • Download para seu computador - você também pode baixar o manual Grizzly H8192 em seu computador e mantê-lo em suas coleções. No entanto, se você não quer perder espaço no seu dispositivo, você sempre pode baixá-lo no futuro a partir de ManualsBase.
Grizzly H8192 Manual de instruções - Online PDF
Advertisement
« Page 1 of 36 »
Advertisement
Versão para impressão

Muitas pessoas preferem ler os documentos não na tela, mas na versão impressa. A opção de imprimir o manual também foi fornecida, você pode usá-la clicando na hiperligação acima - Imprimir o manual. Você não precisa imprimir o manual inteiro Grizzly H8192, apenas as páginas selecionadas. Respeite o papel.

Resumos

Abaixo você encontrará previews do conteúdo contido nas páginas subseqüentes do manual para Grizzly H8192. Se você deseja visualizar rapidamente o conteúdo das páginas subseqüentes, você pode usá-los.

Resumos do conteúdo
Resumo do conteúdo contido na página número 1

MODEL H8192
1" BELT/8" DISC
COMBINATION SANDER
OWNER'S MANUAL
COPYRIGHT © AUGUST, 2007 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TS9703 PRINTED IN CHINA

Resumo do conteúdo contido na página número 2

����������������������������������������������������������������������� �������������������������������������������������������������� ���������������������������������������������������������������������� �������������������������������������������������������������������� ������������������������ ������������������������������������������������������������������ �������������������������������������������������������������������� ���������������������������������������������������������������

Resumo do conteúdo contido na página número 3

Table of Contents INTRODUCTION ............................................................................................................................... 2 Foreword .................................................................................................................................... 2 Contact Info ................................................................................................................................ 2 Machine Data Sheet ................................

Resumo do conteúdo contido na página número 4

INTRODUCTION Foreword Contact Info If you have any comments regarding this manual, We are proud to offer the Model H8192 please write to us at the address below: 1" Belt/8" Disc Combination Sander. This machine is part of a growing Grizzly family of fine Grizzly Industrial, Inc. woodworking machinery. When used according C /O Technical Documentation Manager to the guidelines set forth in this manual, you can P.O. Box 2069 expect years of trouble-free, enjoyable operation Bellingham, WA 9

Resumo do conteúdo contido na página número 5

Machine Data Sheet � � � � � � �� � � � �� � � � � � � � �� � � � �� �� � � � � �� � �� � � � � �� � � � � � � � �� �� � �� � � � � �� � � � � �� � � � � �� � � � � � � � �� �� � � �� � �� � � � � �� � � � � � � � � ������ ����� ��� ��� ����� ������� ����� ����� ������ ������� ���� ��������������������������������������������������������������� � ������������������������������������������������������������������������������������������� ������ ����� �������� ����������� � ������� ���������������

Resumo do conteúdo contido na página número 6

Identification B A C D F E G H P L I J M O K N Figure 1. Model H8192 identification. A. Sanding Belt 1" x 42" I. Motor B. Sanding Belt Tracking Knob J. Disc Table Angle Scale C. Sanding Disc 8" K. Disc Table Lock Handle D. Miter Gauge L. Disc Dust Port E. Disc Table M. ON/OFF Switch with Disabling Key F. V-Belt Safety Cover N. Rubber Machine Feet G. Sanding Belt Safety Cover O. Sanding Belt Table Lock Handle H. Sanding Belt Dust Port P. Sanding Belt Table -4- Model H8192 1" Belt/8" Disc Combo Sa

Resumo do conteúdo contido na página número 7

� � � �� � �� � �� � � � �� � � � �� � � � �� � � �� � � � � � � �� � � � �� � � � � � � �� � � �� � � � � � �� � � � � ��� � � � � � � � � �� � � � �� � � � � � � � � � �� � � � � � � �� � �� � � � � � �� � � � � � � �� � �� � �� � � � � � � �� � �� �� � � � � � � � � �� � �� � � � � � � � �� � � � � � � ���� � � � � �� � � � � �� � � � �� � � � � � �� �� � �� �� � � � � � �� � �� � � � � � � �� � � �� � � � � � �� � � � � �� � � � � � � � �� � �� � � � � � �� � � �� � � � � �� � �� � � � � � �

Resumo do conteúdo contido na página número 8

� � � � � �� � � � � � � �� � � � �� � � �� � � � � � � � � � ��� ����� ������ �������� ���� ���� � ���� � � � � � � � � � � � � � � � � � � � � � � � � � �� � � � � � � � � � � � � � � � � � � � � � � � � � � � �� ���������� ����� �� ������ ��� ��������� ���� � � � � � � � � � � � � � � � � � � � � � � � � � � � �� � ����� ���� ���������� ��������� ������� ���� � ���������� ������������� ���� ����� ���� �������� ���� ���������� �� � ����������� ���� � � � � � � � � � � � � � � � � � � � � � � �

Resumo do conteúdo contido na página número 9

Additional Safety Instructions for Belt and Disc Sanders 1. RESPIRATOR AND SAFETY GLASSES. 6. UNATTENDED OPERATION. Never leave Always wear a respirator and safety glasses the machine running attended. while operating the sander. Dust and chips are created when sanding. Some debris will 7. DUST COLLECTION SYSTEM. Always be ejected, becoming hazards to the eyes operate the sander with an adequate dust and lungs. collection system in place and running. 2. AVOIDING ENTANGLEMENT. DO NOT 8. FEED

Resumo do conteúdo contido na página número 10

SECTION 2: CIRCUIT REQUIREMENTS 110V Operation Electrocution or fire could result if this machine is not grounded correctly or if your electrical Serious personal injury could occur if you configuration does not connect the machine to the power source comply with local and state before you have completed the set up pro- codes. Ensure compliance cess. DO NOT connect the machine to the by checking with a power source until instructed to do so. qualified electrician! Amperage Draw The Mo

Resumo do conteúdo contido na página número 11

SECTION 3: SETUP Setup Safety Items Needed for Setup The following items are needed to complete the This machine presents setup process, but are not included with your serious injury hazards machine: to untrained users. Read through this entire Description Qty manual to become • Safety Glasses (for each person) .............. 1 familiar with the controls • Phillips Head Screwdriver .......................... 1 and operations before • Wrench 14mm ........................................

Resumo do conteúdo contido na página número 12

Inventory The following is a description of the main B components shipped with your machine. Lay the A components out to inventory them. C Note: If you can't find an item on this list, check the mounting location on the machine or examine the packaging materials carefully. Occasionally D we pre-install certain components for shipping F purposes. G E Inventory: (Figures 3–4) Qty Figure 3. Model H8192 inventory items A–G. A. Motor and Base .......................................... 1 B. Belt

Resumo do conteúdo contido na página número 13

Hardware Recognition Chart -11- Model H8192 1" Belt/8" Disc Combo Sander

Resumo do conteúdo contido na página número 14

Clean Up Site Considerations The unpainted surfaces are coated with a waxy Placement Location oil to prevent corrosion during shipment. Remove Consider existing and anticipated needs, size of this protective coating with a solvent cleaner or material to be processed through each machine, citrus-based degreaser such as Grizzly’s G7895 and space for auxiliary stands, work tables or Citrus Degreaser. To clean thoroughly, some parts other machinery when establishing a location for must be r

Resumo do conteúdo contido na página número 15

Assembly Assembly To avoid risk of serious injury, DO NOT connect the sander to power until told to do so in the Test Run subsection. To assemble your combo sander: Figure 7. Cap screws securing the belt housing 1. Using 13mm wrenches, loosen the four motor assembly (viewed from underneath the base). mount hex bolts (Figure 6) so you can adjust the motor position in the next steps. Belt Housing Assembly Motor Mounting Base Hex Bolts (2 of 4) Figure 8. Belt housing assembly installed. Figu

Resumo do conteúdo contido na página número 16

Deflection 5. Position the belt housing assembly so there 7. Secure the right side of the V-belt cover with 1 is about ⁄4" V-belt deflection when moderate one M4-.7 x 10 Phillips head screw and flat pressure is applied to the V-belt between the washer. pulleys (see Figure 10)—then fully tighten the cap screws to secure the belt housing 8. Position the V-belt rear cover, as shown in assembly in place. Figure 12, and secure it in place with the M4- .7 x 40 Phillips head screw and wingnut. Wing

Resumo do conteúdo contido na página número 17

9. Peel the backing from the 8" sandpaper disc 15. Lay the sander down on a flat surface, as and apply it to the aluminum disc. shown in Figure 15, and place a thin piece of 1 cardboard approximately ⁄16" thick over the 10. Thread the M5-.8 x 5 set screw into the sanding disc. This piece of carboard will act aluminum disc shaft. as a spacer when you install the disc table. 11. Slide the aluminum disc onto the motor arbor, making sure to align the arbor key with the disc keyway. 12. Rotate

Resumo do conteúdo contido na página número 18

1 17. Secure the dust port, as shown in Figure 17, 20. Install the belt table with a ⁄16" clearance from with the M6-1 x 15 Phillips head screw and the sanding belt, and secure it in place with flatwasher. the table lock handle (see Figure 19). Mounting Screw Figure 17. Disc dust port installed. Figure 19. Sanding belt table installed. Note: Make sure the dust port covers the 21. Loosen the cap screw shown in Figure 20, 1 entire opening in the dust cover. adjust the belt support approximatel

Resumo do conteúdo contido na página número 19

5. Turn the machine OFF. Test Run 6. Remove the switch disabling key, as shown in Figure 21. Once the assembly is complete, test run your sander to make sure it runs properly and is ready for regular operation. The test run consists of verifying the following: 1) The motor powers up and runs correctly, and 2) the switch disabling mechanism on the switch works correctly. If, during the test run, you cannot easily locate the source of an unusual noise or vibration, stop using the machine

Resumo do conteúdo contido na página número 20

Mounting Mounting Sander Dust Collection Once you have confirmed that your machine is running properly, mount it to a workbench. DO NOT operate the Model H8192 without The strongest mounting option is a "Through an adequate dust collection system. This Mount" where holes are drilled all the way through sander creates substantial amounts of wood the workbench, and hex bolts, washers, and dust while operating. Failure to use a dust lock nuts are used to secure the sander to the collection


Manuais similares
# Manual do usuário Categoria Baixar
1 Grizzly 7" Angle Polisher H0593 Manual de instruções Moedor 0
2 Grizzly 37'' WIDE BELT G0446 Manual de instruções Moedor 0
3 Grizzly 37'' WIDE BELT G0539 Manual de instruções Moedor 1
4 Grizzly Air Belt H0596 Manual de instruções Moedor 0
5 Grizzly Belt G0581 Manual de instruções Moedor 2
6 Grizzly Bending Brake T21319 Manual de instruções Moedor 0
7 Grizzly 9962ZX Manual de instruções Moedor 0
8 Grizzly BLU-RAY DISC DRIVE GBC-H20L Manual de instruções Moedor 2
9 Grizzly Belt H2933 Manual de instruções Moedor 0
10 Grizzly 37'' WIDE BELT G0571 Manual de instruções Moedor 1
11 Grizzly Double head Wide Belt G0581 Manual de instruções Moedor 1
12 Grizzly Drum H2882 Manual de instruções Moedor 0
13 Grizzly Disc G0724 Manual de instruções Moedor 0
14 Grizzly Double head Wide Belt H2933 Manual de instruções Moedor 1
15 Grizzly G0446 Manual de instruções Moedor 0
16 3Com Tech Note Wireless Remote Control TT24 Manual de instruções Moedor 2
17 Agilent Technologies 16440A SMU Manual de instruções Moedor 0
18 Alpha Industries AEP-458 Manual de instruções Moedor 0
19 Bausch & Lomb DISCOVERER 78-1600 Manual de instruções Moedor 12
20 Agilent Technologies 83485A Manual de instruções Moedor 1