Resumo do conteúdo contido na página número 1
Resumo do conteúdo contido na página número 2
Distributors and Head Offices / Vertriebs- und Hauptgeschäftsstelle Distributeurs et sièges sociaux / Distribuidores y Casas matrices FCC INFORMATION If you have any questions, please contact your dealer or one of the following companies. Pour plus de détails sur les produits, veuillez vous adresser à Yamaha ou au distributeur le plus COMPLIANCE INFORMATION STATEMENT proche figurant dans la liste suivante : (DECLARATION OF CONFORMITY PROCEDURE) Bei weiteren Fragen wenden Sie sich Sitte an Ihre
Resumo do conteúdo contido na página número 3
LASER INFORMATION Laser Diode Properties CAUTION Material: GaAlAs Use of controls or adjustments or performance of Wavelength: 780-787 nm procedures other than those specified herein may result Emission Duration: Continuous in hazardous radiation exposure. Laser Output Power: Less than 44.6 µ W* * This output is value measured at a distance 200 ACHTUNG mm from the objective lens surface on the optical Halten Sie sich beim Bedienen und Einstellen der pick-up block. Bedienungselemente sowie b
Resumo do conteúdo contido na página número 4
OWNER’S MANUAL i English
Resumo do conteúdo contido na página número 5
SAFETY PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING These precautions explain how to use the device correctly and safely, thereby preventing injury to yourself or to others. This section has been sub-divided into a WARNING section and a CAUTION section, according to the likelihood and nature of any potential injuries or damage inflicted. They relate to your personal safety, and also help you minimize the risk of damaging the device. Please read these sections carefully before proceedin
Resumo do conteúdo contido na página número 6
CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to yourself or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following: Always unplug the computer from the electrical outlet if it will not be used for a prolonged period of time or if there is a risk of lightning. Otherwise, there is an increased risk of electrical shock, short-circuiting or fire. Do not expose the device to excess
Resumo do conteúdo contido na página número 7
About CD-R/RW discs Please read the following regarding the handling of CD-R/RW discs. 1. Do not expose discs to excessive heat or vibrations or extreme cold or heat (such as in direct sunlight or near a heater). 2. Do not touch disc surfaces. When handling a disc, hold it by its edges. 3. Remove dust and dirt from disc surfaces. Use air-based dust removers. The surfaces may be scratched if wiped with a dry cloth. 4. Do not write or stick labels on disc surfaces except where indicated. 5. Do no
Resumo do conteúdo contido na página número 8
Table of Contents Setup Flowchart ............................................................................................. 1 Introduction ..................................................................................................... 2 Features of the CRW8824E Drive ...................................................... 2 System Configuration ................................................................................. 3 Computer ...................................................
Resumo do conteúdo contido na página número 9
Setup Flowchart This flowchart shows the procedure for setting up the CRW8824S drive. For easy cross-referencing, the relevant pages in this manual are also given. STEP STEP Obtain a SCSI adapter card Do you have a SCSI adapter 1-1 Recommended models: NO card? 1 Adaptec AHA-2940-series (PCI) YES Check that the SCSI adapter STEP Install the SCSI adapter card STEP Read this manual and insert the card is recognized correctly 1-2 2 SCSI card into the appropriate Go to Control Panel | System | De
Resumo do conteúdo contido na página número 10
Introduction Features of the CRW8824S Drive High speed CD-R/RW discs can be written/rewritten at up to 8X speed. For example, an audio CD (74 minutes/650 MB) can be created in approximately 10 minutes. Data reading at up to 24X speed is supported. CD TEXT support CD TEXT is a capability that adds text data to an audio CD. Information such as the song name or artist name can be recorded using writing software. The text data on the disc you create can be displayed by a CD player that is compatible
Resumo do conteúdo contido na página número 11
System Configuration In order to use the CRW8824S drive, your computer system will need to meet the following set of requirements. Computer The minimum system requirements for using the CRW8824S drive are as follows: Any fully PC/AT-compatible computer. A Pentium-class or higher CPU running at 200MHz or faster. OS: Windows 95, Windows 98, Windows 98 SE (Second Edition), Windows NT4.0 with Service Pack 3 or later, or Windows 2000. RAM: 32MB memory, 64MB or more recommended. A vacant 5.25-inch dri
Resumo do conteúdo contido na página número 12
System Configuration Discs The CRW8824S can record discs that carry the following logos. CD-R discs • The CRW8824S can write these discs at 8X*, 6X*, 4X, and 1X speeds. • These discs can be played back in a CD-ROM drive or a CD player. * Compatible with “Orange Book Part 2.” * When writing at 8X or 6X speeds, please use “high-speed writing capable” discs. CD-RW discs • There are two types of CD-RW discs: those that support write/rewrite speeds of 4X, 2X and 1X, and those that support only 2X. •
Resumo do conteúdo contido na página número 13
System Configuration About CD-ROM A CD-ROM disc is a compact disc containing high-density read-only data. It has many applications, including the playback of music and video, the archiving of data, as well as on-line documentation. The following are descriptions of each CD-ROM format: CD-DA: Up to 74 minutes of stereo audio is written in 16-bit resolution at a sampling rate of 44.1kHz (for a 74 minutes disc). Data CD: Up to 650 megabytes of computer data is stored in standard ISO9660 format. V
Resumo do conteúdo contido na página número 14
Front and Rear of Unit Front Panel The CRW8824S drive’s front panel features the following: Manual Eject hole Only use this if no other method is available for unloading a disc. Disc tray Eject button The tray is used to hold the disc. Press this button when you need It slides out from the drive unit when to unload a disc. Remove the a disc needs to be loaded or unloaded. disc after the tray has opened. Headphone Headphone ON/DISC LED READ/WRITE LED jack volume control This LED is This LED
Resumo do conteúdo contido na página número 15
Front and Rear of Unit Rear Panel The CRW8824S drive’s rear panel features the following: SCSI connector SCSI connector Inser Insert the connector of the SCSI ribbon t the connector of the SCSI ribbon cable her cable here. Make sur e. Make sure you align the e you align the r red line of the ribbon cable with pin 1 of ed line of the ribbon cable with pin 1 of the drive’ the drive’s connector s connector, marked “SCSI , marked “SCSI INTERF INTERFACE CONNECTOR 1.” ACE CONNECTOR 1.” SCSI ID S
Resumo do conteúdo contido na página número 16
Installation This section gives a step-by-step guide to installing the CRW8824S drive. Make sure you have all the necessary tools. First Steps Once you have taken the CRW8824S drive out of its packaging, you should immediately note down the serial number shown on the top of the drive together with a barcode. You may need to refer to this number when requesting User Support services. In the box below the following diagram, write down the 10- character serial number (consisting of 3 letters fol
Resumo do conteúdo contido na página número 17
SCSI INTERFACE CONNECTOR ID SELECT PARITY AUDIO OUT TERMINATOR DC INPUT BLOCK SIZE + + RL G 1 2 4 1 5V G 12V Installation To set each jumper switch, you have to bridge the two pins in the respective column of the grid with a plastic shunt. Shunts are already attached to the jumper switches in their default configurations. Rear Panel ID SELECT PARITY TERMINATOR BLOCK SIZE 124 Shunt Jumper switches The plastic shunts actually contain metal for bridging the two pins of a jumper switch, creating
Resumo do conteúdo contido na página número 18
Installation 1 SCSI ID number Each of the SCSI devices connected to the computer is identified by its SCSI ID number. You need to assign a number from “0” to “7” for each SCSI device. Commonly, ID number “7” is reserved for the computer’s SCSI adapter card itself. Therefore, the CRW8824S can actually be assigned an ID number from “0” to “6.” The ID number is set by attaching/detaching the shunts on the ID Select jumper switches according to the diagram shown below. SCSI ID 0 SCSI ID 1 SCSI ID 2
Resumo do conteúdo contido na página número 19
Installation 2 Parity Check The parity check is used for error correction during data transmissions. If parity- checking has to be disabled, the shunt on the Parity jumper switch should be removed. Parity ON (Default) Parity OFF Normally leave this setting alone. ID SELECT ID SELECT PARITY PARITY TERMINATOR TERMINATOR BLOCK SIZE BLOCK SIZE 124 124 By factory default, the Parity switch is set to “ON” and should normally be left in this state. 3 Termination Terminators prevent SCSI signals from
Resumo do conteúdo contido na página número 20
Installation Termination ON (Default) Termination OFF ID SELECT ID SELECT PARITY PARITY TERMINATOR TERMINATOR BLOCK SIZE BLOCK SIZE 124 124 Set to “ON” if CRW8824S drive is last device on SCSI chain 4 Block Size The data block size of the CRW8824S can be set to 512 bytes per sector by setting the Block Size jumper switch to “ON.” This is necessary when installing the CRW8824S on a UNIX-based workstation. It is not necessary for Windows 95/98/ 98SE/NT4.0/2000 computers. Block size OFF (Default
