Resumo do conteúdo contido na página número 1
SRCD858
M M W W
INSTRUCTION MANUAL
Resumo do conteúdo contido na página número 2
WARNINGS TO Prevent fire or shock hazard, do not use this plug with an extension cord, receptacle or add other outlet unless the blades can be can be fully inserted to prevent blade exposure. To prevent fire or shock hazard, do not expose this appliance to rain or moisture. WARNING The lightning flash with arro- CAUTION : TO REDUCE THE The exclamation point within whead symbol,within an equ- RISK OF ELECTRIC SHOCK an equilateral triangle is int- ilateral triangle is intented to DO NOT REM
Resumo do conteúdo contido na página número 3
IMPORTANT NOTES • Avoid installing this unit in places • Operate controls and switches as exposed to direct sunlight or close to heat described in the manual. radiating appliances such as electric • Before turning ‘On’ the power, make certain that power cord is properly heaters, on top of other stereo equipment that radiates too much heat, installed. places lacking ventilation or dusty areas, • Store your CDs, in a cool area to avoid places subject to constant vibration and/ da
Resumo do conteúdo contido na página número 4
UNPACKING AND SET-UP • Carefully remove the unit from the carton and remove all packing material from the unit. • Remove any labels or stickers which may be on the front or top of the set, but do not remove any labels from the back or bottom. • We suggest that you retain the original carton and packing materials in case it ever becomes necessary to return your unit for service. This is the only sure way to protect the unit from damage in transit. • Remove any small strips of tape that may have b
Resumo do conteúdo contido na página número 5
PROTECT YOUR FURNITURE This model is equipped with non-skid rubber ‘feet’ to prevent the product from moving when you operate the controls. These ‘feet’ are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber ‘feet’ to soften, and leave marks or a rubber residue on the furniture. To prevent any damage to your furniture
Resumo do conteúdo contido na página número 6
LOCATION OF CONTROLS 22 20 21 19 18 1 17 2 3 4 16 5 15 6 14 7 8 13 9 12 10 11 - 5 -
Resumo do conteúdo contido na página número 7
LOCATION OF CONTROLS 1. STANDBY Button Rear of Unit 2. REMOTE Sensor 23. AC Main Lead 3. PROGRAM Button 24. Speaker Sockets 4. LCD Display 25. FM Antenna wire 5. CD REPEAT Button 6. Radio Dial Scale 7. FUNCTION Selector 8. HEADPHONES Socket 9. RADIO BAND Selector 10. CASSETTE Compartment 11. CASSETTE keys RECORD, PLAY , FAST REWIND, FAST FORWARD, STOP / EJECT, PAUSE 12. DISC Button 13. CD PLAY/PAUSE Button. 14. TUNING Knob 15. CD STOP Button 16. BASS BOOST Button 17. VOLUME Control Buttons 18.
Resumo do conteúdo contido na página número 8
PREPARATION FOR USE Remove the stereo carefully from the box, retaining the packaging for future use. Read these instructions carefully before use. CONNECTIONS Before switching on your stereo system, be sure that it is connected as follows: SPEAKERS Connect the speakers to the speaker sockets on the back of the music system. Connect the left speaker to the left speaker socket and the right speaker to the right speaker socket. Connect the Mains Lead to an AC outlet. Insert two R03S (AAA or equ
Resumo do conteúdo contido na página número 9
Discs should be returned to their cases after use. This avoids serious scratches that could cause the Laser pickup to skip. Do not expose discs to direct sunlight, high humidity, or high temperatures for extended periods. Long exposure to high temperatures can warp the disc. LOADING DISCS LOADING AND UNLOADING COMPACT DISCS Set the FUNCTION Selector to the CD position. Open the disc compartment. Once the CD cover has opened, remove a disc from its case and place it carefully in one of the ind
Resumo do conteúdo contido na página número 10
Notes: If the disc is deeply scratched, or too dirty, disc play may not start. If an improperly centered disc is played, noise can be heard in the mechanism. The use of such discs should be avoided. IMPORTANT INFORMATION This compact disc player has built-in error compensation circuits to correct minor defects in a disc. There are limits, however, to the amount of corrections available. In some cases, the CD player may skip some tracks on a disc during disc play. This problem may be caused by de
Resumo do conteúdo contido na página número 11
Notes: The & Buttons can be used to select a desired track to play before disc play starts. In this case the number of the selected track will be displayed until the Play/Pause Button is pressed. DISC SKIP To skip to the next disc simply press the DISC SKIP Button. The unit will cycle through position 1 - 2 - 3 - 1 - 2 . . . . . .etc REPEAT DISC PLAY If the REPEAT Button is pressed during normal or programmed disc play the following repeat functions are displayed in sequence in the CD Display
Resumo do conteúdo contido na página número 12
LISTENING TO PROGRAMMED TRACKS Program your selection of tracks by following the procedure shown above. Press the PLAY/PAUSE Button. Disc play will start at the beginning of the first programmed track. TO CLEAR THE PROGRAMMED MEMORY If the disc is playing, press the STOP Button. Press the STOP Button again. All the programs will then be erased from memory. The program memory will also be cleared if the Function Selector is changed to another function, or if the power is switched off. LISTENING T
Resumo do conteúdo contido na página número 13
COPYRIGHT NOTICE WARNING Most records, compact discs, audio and video cassettes, radio and television broadcasts contain material which is subject to copyright laws. It is unlawful to record such material in any form whatsoever, whether on disc or tape, without the permission of the copyright owner concerned. Any person who makes a recording of such material without the consent of the copyright owner infringes on copyright laws and may be liable to pay substantial damages to the copyright owner,
Resumo do conteúdo contido na página número 14
REMOTE CONTROL 1. STANDBY Button 2. STOP Button 3. PLAY / PAUSE Button 4. CD SKIP Buttons 5. PROGRAM Button 6. DISC SKIP Button 7. MUTE Button 8. VOLUME UP/DOWN Buttons. BATTERY INSTALLATION Insert 2 R03S (AAA or equivalent) size batteries into the battery compartment of the remote control and replace the cover (Batteries are not included). BATTERY REPLACEMENT When the batteries become too weak, the operating distance of the remote control is greatly reduced and you will need to replace the batt
Resumo do conteúdo contido na página número 15
CASSETTE CARE Two common causes of trouble experienced when using cassettes are:— (a) Tape jamming - Leading to uneven speed in playback, and (b) Tape tangling - Where the tape wraps itself around vital parts of the mechanism. To reduce the likelihood of these problems occurring, the following precautions should be observed. Check that there are no loose layers of tape visible through the cassette center window (see Fig. 1). Take up any loose layers, using a pencil or hexagonal barrelled ballpoi
Resumo do conteúdo contido na página número 16
MAINTENANCE AND CARE Electronic products of this kind should never be subjected to extreme temperatures or high humidity. For instance, this set should not be placed in bathing areas or around stoves and radiators. If necessary, clean the unit with a piece of cloth dampened with water only (Be sure the AC Power Cord is disconnected from the Mains). Never use a polish or a strong detergent as this will damage the finish of the cabinet. This equipment has been designed and manufactured to meet the
Resumo do conteúdo contido na página número 17
SPECIFICATIONS Power Supply AC: 120V ~ 60 Hz Radio Frequency Coverage FM: 88 - 108 MHz AM: 530 - 1710 kHz Recording System Recording System: DC Bias Erasing System: Magnetic Erase General Speaker Impedance 8 Ohms Headphones: 3.5mm stereo jack plug, 8-32 Ohms CD Player Pick Up: 3-Beam, Semiconductor Laser Encoding: 16-Bit Linear 2x Oversampling Due to continuing improvements, the features and design are subject to change without notice. For service assistance and product information, please call
Resumo do conteúdo contido na página número 18
MADE IN CHINA
