Resumo do conteúdo contido na página número 1
OWNER’S MANUAL
THE SONIC FRONTIERS SFT-1 TRANSPORT
Resumo do conteúdo contido na página número 2
CONTROL FUNCTIONS AND CONNECTIONS A B C D E F G H I J A-Loading Drawer - This is the mechanism for loading CDs F - Stop Button - When depressed, this button will stop all func- for play in the SFT-1. The drawer is opened by depressing the tions, taking the CD out of play mode and aligning the trans- LOAD (C) button. A CD is placed in the tray‘s circular depres- port to the first track or the first programmed track. Depressing sion, label side up and lying flat. The drawer is closed, and the STOP
Resumo do conteúdo contido na página número 3
K L M N O P K -Main Power Switch - This switch must be in the “on” posi- O -Coaxial BNC Cable Output - This digital output is a BNC tion for the SFT-1 to operate. When the POWER button (J) has S/PDIF connector. If chosen for use, this digital output should rendered the unit’s control functions off, this switch allows be connected to an S/PDIF connector on the DAC. The BNC - power to continue to circulate to sections of the transport so the Coaxial cable impedance should be 75 ohms. unit will ope
Resumo do conteúdo contido na página número 4
FUNCTIONS OF THE SFT-1 REMOTE CONTROL Q T - Play Button - When depressed, this button will put the trans- port in play mode. During play mode, the CD is being read R and a digital datastream is being transmitted from the chosen S digital output (M through P). T U -Pause Button - When depressed, this button will stop the V U transmission of the digital datastream at the precise moment it is depressed, and will hold that position until play is resumed by W X depressing the PAUSE (E or U) button ag
Resumo do conteúdo contido na página número 5
OPERATION OF THE SFT-1 TRANSPORT T R O U B L E S H O O T I N G Before plugging in the SFT-1, check to see that the unit is configured If at any time the SFT-1 Transport fails to work properly, for the correct AC line voltage for country of use. The operating AC consult this checklist: line voltage is indicated on the side of the shipping box. If the SFT-1 Transport is set incorrectly for the country in which it is to be operat- If the SFT-1 will not turn on: ed, contact the dealer or distributo
Resumo do conteúdo contido na página número 6
SFT-1 PLACEMENT LIMITED FIVE YEAR WARRANTY Be sure the SFT-1 is resting on a hard, flat surface. Sonic Frontiers, Inc. warrants to the purchaser that each SFT-1 Transport is free of manufacturing defects for a period of five SAFETY INSTRUCTIONS (5) years from the date of purchase. This five (5) year limited 1. Water and Moisture - This product should not be used near non-transferable warranty excludes the transport mechanism, water. To prevent fire or shock hazard, do not expose this which we wa
Resumo do conteúdo contido na página número 7
SFT-1 TECHNICAL SPECIFICATIONS Wow and Flutter Below measurable levels Jitter <2 ps rms, to 40 kHz at the clock Typically 10 ps rms, at the outputs independently verified with UltraAnalog’s ( latest Jitter Analyzer) Digital Outputs AES/EBU Balanced on XLR-3 connector Impedance 110 ohms, ±5% Level 3.0V p-p typ with 110 ohm load Tr=Tf 7 ns, typ SPDIF Single ended RCA connector D a n g e r - Invisible Laser radiation when the Impedance 75 ohms, ±5% cover is removed from the chassis. Avoid dire c t
Resumo do conteúdo contido na página número 8
We at Sonic Frontiers are sure that you will derive many years of listening pleasure with your new SFT-1 Transport. This Owner’s Manual contains important information regarding the operation and care of the SFT-1. Be sure to read this manual carefully and follow these instructions in order to keep it looking, operating and sounding its best. 2790 Brighton Road, Oakville, Ontario, Canada L6H 5T4 Telephone: (905) 829-3838 Facsimile: (905) 829-3033 Sonic Frontiers can be reached from 9:00 a.m
