Resumo do conteúdo contido na página número 1
®
MULTISET PRO - PRE-WIRED DIMMING CABINET MDC20
INSTALLATION AND
OPERATIONS
MANUAL
IMPORTANT: RETAIN THESE INSTRUCTIONS FOR THE END USER. DO NOT DISCARD.
ABC D
1
2
3
4
5
MULTISET PRO® - PRE-WIRED
DIMMING CABINET MDC20
COMPATIBLE WITH MULTISET PRO® HEATSINK DIMMER MODELS:
MHP5ES, MHP8ES, MPH5AVES, MHP8AVES, MHP600VA, MHP1000VA, MHP1500VA,
MHP2000VA, MHP1000ND, MHP2000ND, MHP500QE, MHP600HDF120,
MHP1500HDF120, MHP600EB, MHP1000EB, MHP1500EB, MHPWHIS
WARNING: Before installation, disconnect power
Resumo do conteúdo contido na página número 2
Installation ® MULTISET PRO - PRE-WIRED DIMMING CABINET MDC20 and Operation Description The MultiSet Pro® is a revolutionary system of advanced digital wallbox dimmers for economical and flexible multi-scene, multi-chan- nel control. MultiSet Pro® provides flexible 13-scene preset dimming control for up to 30 devices, as well as, 12 adjustable fade rates up to one hour that are programmable by scene. The MultiSet Pro® Pre-Wired Dimmer Cabinet MDC20 facilitates design and installation by combini
Resumo do conteúdo contido na página número 3
Installation ® MULTISET PRO - PRE-WIRED DIMMING CABINET MDC20 and Operation Cabinet Installation 1. Surface or recess mount on wall using appropriate wall anchors. Use wall anchors capable of support- BACK Figure 1 ing up to 80-90 pounds. Note: All wiring should be in accordance with local regulations and the National Electrical Code. All wiring shall enter and exit the cabinet via the provided 1 knock outs at the top or bottom of the cabinet. 1 2. Terminate 120VAC lines and neutrals to termi
Resumo do conteúdo contido na página número 4
Installation ® MULTISET PRO - PRE-WIRED DIMMING CABINET MDC20 and Operation Replacing the Keypad Button Labels (Classic Series) MultiSet Pro® Classic Series Masters are supplied with over 260 Figure 3 labels to personalize the buttons for your own scene names. The buttons are labeled at the factory with letters. These button labels can easily be changed to customize your system: 1. Insert a small screwdriver into the outside edge on the side ON of a button and pry off the plastic key cover. CAUT
Resumo do conteúdo contido na página número 5
Installation ® MULTISET PRO - PRE-WIRED DIMMING CABINET MDC20 and Operation Dimmer/Switch Operating Instructions MULTISET PRO® DIMMER • To Turn light on to preset level, tap top of rocker, the dimmer fades up at the 1.5 second rate. • A second tap of the rocker fades the dimmer to full brightness. • To adjust the light level, press and hold top or bottom of rocker until desired light level is reached, and then release. • To turn lights off, tap the bottom of the rocker. The dimmer fades at the
Resumo do conteúdo contido na página número 6
Installation ® MULTISET PRO - PRE-WIRED DIMMING CABINET MDC20 and Operation Changing the Fade Rate MultiSet Pro® Dimmers can be programmed for 12 different fade rates. Dimmers Figure 9 can be programmed to have a different fade rate on each scene. The fade rate choices are: 2 min 1.5 seconds 1 minute 60 min 1 min 3 seconds 2 minutes 30 sec 4.5 seconds 5 minutes 30 min 15 sec 7.5 seconds 15 minutes 7.5 sec 15 min 15 seconds 30 minutes 4.5 sec 30 seconds 60 minutes 3 sec 5 min 1.5 sec Global Fade
Resumo do conteúdo contido na página número 7
Installation ® MULTISET PRO - PRE-WIRED DIMMING CABINET MDC20 and Operation Setting the Button Brightness (Ellipse Series) The brightness level of each Ellipse Master Control Station button can be programmed to 100% (factory default), 75%, 50%, or 25%. To change the setting: Figure 13 1. On a 5-Scene Master, press and hold buttons “B” and “D” simultaneously for 3 seconds (on an 8- Scene Master, press buttons “H” and “J”). On a 5-Scene Master, buttons “A” thru “D” illuminate 8-Scene LED 5-Scene
Resumo do conteúdo contido na página número 8
Installation ® MULTISET PRO - PRE-WIRED DIMMING CABINET MDC20 and Operation Cabinet Specifications Input Voltage: 108-132VAC, 60Hz, ±3Hz Operating Temperature: 0°- 40° Celsius Weight: 80 lbs empty - 88 lbs with (20) 1000W dimmers Dimensions: 45.5"(H) x 20.1"(W) x 5.5"(D) Materials: White, 16 Gauge Steel Enclosure: Double hinged cover / lockable latching cover Dimensions 20.1" 18.0" 4.0" 1.5" 45.5" 45.5" Note: Cabinet cover has a swinging radius of 21" 3 YEAR LIMITED WARRANTY Lightolier® Contro
