Manual do usuário ATD Tools ATD-3054

Resumo do conteúdo contido na página número 1

ATD-3054
MacPherson Strut Spring Compressor
Instructions
Made in Taiwan to ATD Inc. Specifications

Resumo do conteúdo contido na página número 2

Safety Warning and Precautions WARNING: When using this tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Read all instructions before operating. • Keep work area clean. Cluttered areas invite injuries. • Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don’t expose to rain. Keep work area well lighted. • Keep children and bystanders away. Children and bystanders m

Resumo do conteúdo contido na página número 3

Operation • ALWAYS WEAR SAFETY GLASSES AND GLOVES • First, refer to your vehicles manual for any specifics regarding changing your struts or springs and follow ALL of the manufactures recommendations. • Lubricate both main shafts (B) with oil • Align the hooks (A & D) with the safety pins © backed off so the hooks will fit over the spring. • Position both sets of hooks 180˚ apart, opposite each other (as shown in FIGURE 1). • Push safety pins (C) in the lock position

Resumo do conteúdo contido na página número 4

Maintenance • Wipe off components of the MacPherson Strut Spring Compressor of all grease, rust and dirt. • Store all components in the Case, and place in a clean and dry location. • Keep both shafts (B) lubricated with oil • Inspect tool before and after each use. Replace tool if any parts are damaged. There are no user serviceable parts available for this unit.