Resumo do conteúdo contido na página número 1
CD RECEIVER KD-S50
RECEPTOR CON CD KD-S50
RECEPTEUR CD KD-S50
KD-S50
160W KD-S50
COMPACT
DIGITAL AUDIO
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
For Customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the cabinet.
Retain this information for future
INSTRUCTIONS
reference.
MANUAL DE INSTRUCCION
Resumo do conteúdo contido na página número 2
INFORMATION (For USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarante
Resumo do conteúdo contido na página número 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit .................................. 2 SOUND ADJUSTMENTS .................... 12 Adjusting the sound ................................... 12 LOCATION OF THE BUTTONS ...............4 Turning on/off the loudness function ............. 12 Control panel ...........................
Resumo do conteúdo contido na página número 4
LOCATION OF THE BUTTONS Control panel Display window ui o;as d fgh j 12 45 6789 3 pq w ert y 1 (standby/on/attenuator) button Display window 2 +/– button u Volume (or audio) level indicator 3 LOUD button Equalization Pattern indicator 4 MO (monaural) button i Tuner reception indicators RND (random) button MO (monaural), ST (stereo) 5 Display window o RND (random) indicator 6 0 (eject) button ; RPT (repeat) indicator 7 CD button a "SCM" indicator 8 FM button s LOUD indicator 9 AM button d Sound m
Resumo do conteúdo contido na página número 5
BASIC OPERATIONS 1 160W 2 3 Turning on the power 4 Adjust the sound as you want (see page 12 – 14). 1 Turn on the power. To drop the volume in a moment Press briefly while listening to any source. “ATT” starts flashing on the display, and Note on One-Touch Operation: the volume level will drop in a moment. When you select a source in step 2 below, the To resume the previous volume level, press the power automatically comes on. You do not have button briefly again. to press this button to turn o
Resumo do conteúdo contido na página número 6
RADIO BASIC OPERATIONS 160W To stop searching before a station is received, Listening to the radio press the same button you have pressed for searching. You can use either automatic searching or manual searching to tune into a particular station. Searching a station manually: Manual search Searching a station automatically: Auto search 1 Select the band (FM 1 – 3, AM). 1 Select the band (FM 1 – 3, AM). F M FM1 FM2 F M FM3 FM1 FM2 A M FM3 A M AM AM Note: This receiver has three FM bands (FM1, FM2
Resumo do conteúdo contido na página número 7
3 Tune into a station you want while “M” Storing stations in memory is flashing. You can use one of the following two methods to Press ¢ to search store broadcasting stations in memory. stations of higher • Automatic preset of FM stations: SSM (Strong- frequencies. station Sequential Memory) • Manual preset of both FM and AM stations Press 4 to search stations of lower frequencies. FM station automatic preset: SSM You can preset 6 local FM stations in each FM band • If you release your fing
Resumo do conteúdo contido na página número 8
Notes: Manual preset • A previously preset station is erased when a new You can preset up to 6 stations in each band (FM1, station is stored in the same preset number. FM2, FM3 and AM) manually. • Preset stations are erased whent the power supply to the memory circuit is interrupted (for example, during Ex: Storing an FM station of 88.3 MHz into the battery replacement). If this occurs, preset the stations preset number 1 of the FM1 band. again. 1 Select the band (FM1 – 3) you want to Tuning int
Resumo do conteúdo contido na página número 9
CD OPERATIONS 160W To stop play and eject the CD Playing a CD Press 0. CD play stops and the CD automatically ejects 1 Insert a disc into the loading slot. from the loading slot. The source changes to the The unit turns on, tuner (you will hear the last received station). draws a CD and starts If you change the source to AM/FM, the CD play playback automatically. also stops (without ejecting the CD this time). Note: Notes: When a CD is inserted • If the ejected disc is not removed for about 15 s
Resumo do conteúdo contido na página número 10
Locating a track or a particular Selecting CD playback modes portion on a CD To play back tracks at random (Random Play) You can play back all tracks on the CD at random. To fast-forward or reverse the track Each time you press MO/RND (Mono/Random) Press and hold ¢, while playing a CD, CD random play mode turns while playing a CD, to fast on and off alternatively. forward the track. The RND Press and hold 4 , indicator while playing a CD, to MO/RND reverse the track. To go to the next tracks
Resumo do conteúdo contido na página número 11
Prohibiting CD ejection You can prohibit the CD ejection and can lock a CD in the loading slot. Press and hold CD and 0 for more than 2 seconds. C D “EJECT” flashes on the display for about 5 seconds, and the CD is locked and cannot be ejected. To cancel the prohibition and “unlock” the CD, press and hold CD and 0 again for more than 2 seconds, when pressing CD. “EJECT” appears on the display, and the CD ejects from the loading slot. 11 EN09-11KD-S50[J]/f 11 11/6/01, 2:16 PM ENGLISH
Resumo do conteúdo contido na página número 12
SOUND ADJUSTMENTS Adjusting the sound 2 Adjust the level To increase the level. You can adjust the sound characteristics to your preference. To decrease the level. 1 Select the item you want to adjust. Each time you press the button, the adjustable Equalization pattern changes as you items change as follows: adjust the bass or treble. Indication To do: Range BAS Adjust the bass. –06 (min.) Note: (Bass) | Normally the + and – buttons works as the volume +06 (max.) control. So you do not have to
Resumo do conteúdo contido na página número 13
Recalling the sound modes Using the Sound Control When “SCM LINK” is set to “LINK ON,” Memory (SCM) select the source. You can select and store a preset sound adjustment Sound mode suitable to each playback source. (Advanced SCM) indicator C D Selecting and storing the sound modes F M Once you select a sound mode, it is stored in memory. It will be recalled every time you select A M the same source and will be shown on the display. A sound mode can be stored for each of the Each time you change
Resumo do conteúdo contido na página número 14
3 Adjust the bass or treble level. Storing your own sound See page 12 for details. adjustment You can adjust the sound modes (BEAT, SOFT, POP: see page 13) to your preference and store your own adjustments in memory. • There is a time limit in doing the following procedure. If the setting is cancelled before you finish, start from step 1 again. 1 Call up the sound mode you want to 4 Repeat steps 2 and 3 to adjust the adjust. other items. See page 13 for details. SCM 5 Press and hold SCM until th
Resumo do conteúdo contido na página número 15
OTHER MAIN FUNCTIONS To Cancel Advanced SCM Setting the clock You can cancel the Advanced SCM (Sound Control 1 Press and hold SEL (Select) for more Memory), and unlink the sound modes and the than 2 seconds. playback sources. “CLOCK H”, “CLOCK M”, “SCM LINK” or When shipped from the factory, a different sound “LEVEL” appears on the display. mode can be stored in memory for each source so that you can change the sound modes simply by changing the sources. LINK ON: Advanced SCM (different SCM for
Resumo do conteúdo contido na página número 16
Selecting the level display 3 Select the desired mode — “VOL 1”, “VOL 2” or “OFF”. You can select the level display according to your preference. When shipped from the factory, “VOL 2” is selected. VOL 1: Shows the volume level indicator and the equalization pattern indicator. VOL 2: Alternates “VOL 1” setting and illumination display. OFF: Erase the volume level indicator and the equalization pattern indicator. 4 Press SEL (select) to finish the setting. 1 Press and hold SEL for more than 2 sec
Resumo do conteúdo contido na página número 17
How to attach the control panel Detaching the control panel You can detach the control panel when leaving the car. 1 Insert the left side of the control panel When detaching or attaching the control panel, be into the groove on the panel holder. careful not to damage the connectors on the back of the control panel and on the panel holder. How to detach the control panel Before detaching the control panel, be sure to turn off the power. 1 Unlock the control panel. 2 Press the right side of the co
Resumo do conteúdo contido na página número 18
MAINTENANCE Moisture condensation Handling CDs Moisture may condense on the lens inside the CD player in the following cases: This unit has been designed only to reproduce the • After starting the heater in the car. COMPACT • If it becomes very humid inside the car. CDs bearing the mark. DIGITAL AUDIO Should this occur, the CD player may malfunction. In this case, eject the CD and leave • Other discs cannot be played back. the unit turned on for a few hours until the moisture evapora
Resumo do conteúdo contido na página número 19
TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies • CD cannot be played back. CD is inserted upside down. Insert the CD correctly. • CD sound is sometimes You are driving on rough roads. Stop CD play while driving interrupted. rough roads. CD is scratched. Change the CD. Connections are incorrect. Check the cords and connections. • “NO DISC” appears on the No CD is in the loading slot. Insert a C
Resumo do conteúdo contido na página número 20
SPECIFICATIONS AUDIO AMPLIFIER SECTION CD PLAYER SECTION Maximum Power Output: Type: Compact disc player Front: 40 watts per channel Signal Detection System: Non-contact optical Rear: 40 watts per channel pickup (semiconductor laser) Continuous Power Output (RMS): Number of channels: 2 channels (stereo) Front: 16 watts per channel into 4 Ω , Frequency Response: 5 Hz to 20 000 Hz 40 Hz to 20 000 Hz at no more than Dynamic Range: 96 dB 0.8% total harmonic distortion. Signal-to-Noise Ratio: 98 dB R
