Resumo do conteúdo contido na página número 1
L ! T
®
Oasis
Electric Dryer
Secadora el_ctrica
Models/Modelos 110.6705_, 6706_, 6707_
= color number/n_mero de color
W10035160 Sears Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. www.sears.com
Resumo do conteúdo contido na página número 2
TABLE OF CONTENTS PROTECTION AGREEMENTS PROTECTION AGREEMENTS ....................................................... 2 Master Protection Agreements WARRANTY ..................................................................................... 3 Congratulations on making a smart purchase. Your new Kenmore ®product is designed and manufactured for years of DRYER SAFETY .............................................................................. 4 dependable operation. But like all products, it
Resumo do conteúdo contido na página número 3
KENMORE ELITE®APPLIANCE WARRANTY ONE YEAR LIMITED WARRANTY DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES When installed, operated and maintained according to all instructions supplied with the product, if this appliance fails due Customer's sole and exclusive remedy under this limited to a defect in material or workmanship within one year from the warranty shall be product repair as provided herein. Implied date of purchase, call 1-800-4-MY-HOME ®to arrange for free warranties, includ
Resumo do conteúdo contido na página número 4
DRYER SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING." These words mean: You can be killed or seriously injured if you don't immediately follow
Resumo do conteúdo contido na página número 5
INSTALLATION INSTRUCTIONS Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. • Flat-blade screwdriver • Tin snips (new vent • #2 Phillips screwdriver installations) • Adjustable wrench that • Level opens to 1" (2.5 cm) or • Vent clamps hex-head socket wrench Explosion Hazard (for adjusting dryer feet) • Caulking gun and compound (for installing Keep flammable materials and vapors, such as • Wire stripper (for di
Resumo do conteúdo contido na página número 6
Installation Clearances Companion appliance spacing should also be considered. The location must be large enough to allow the dryer door to Additional spacing is required if you exhaust out the rear of open fully. the dryer to either the right or left side. Dryer Dimensions 31,, _.6 cm) 48in. 2. °._212__ (310cm2_ - • _ 18"*_ (45.7 cm) Y II LM1,max." 24in.2. __ 3"* (155ore')- "_- (7.6 crn) 7 1" --_ 29" _ I_1" -_11"*t_ 29,_"_1 5" (2.5cm) (73.7crn) (2.5crn) (2,5crn)(74.3 crn)(12.7 crn) A B A. Reces
Resumo do conteúdo contido na página número 7
If your outlet looks like this: It is your responsibility • To contact a qualified electrical installer. [] To be sure that the electrical connection is adequate and in conformance with the National Electrical Code, ANSI/NFPA 70-latest edition and all local codes and ordinances. The National Electric Code requires a 4-wire supply 4-wire receptacle (!4-30t:?) connection for homes built after 1996, dryer circuits involved Then choose a 4-wire power supply cord with ring or spade in remodeling afte
Resumo do conteúdo contido na página número 8
Direct Wire Power Supply Cord Fire Hazard Fire Hazard Use 10 gauge solid copper wire. Use a new UL listed 30 amp power supply cord. Use a UL listed strain relief. Use a UL listed strain relief. Disconnect power before making electrical connections. Disconnect power before making electrical connections. Connect neutral wire (white or center wire) to center Connect neutral wire (white or center wire) to center terminal (silver). terminal (silver). Ground wire (green or bare wire) must be connected
Resumo do conteúdo contido na página número 9
Put power supply cord through the strain relief. Be sure that Electrical Connection Options the wire insulation on the power supply cord is inside the If your home has: And you will be Go to Section: strain relief. The strain relief should have a tight fit with the connecting to: dryer cabinet and be in a horizontal position. Do not further tighten strain relief screws at this point. 4-wire receptacle A UL listed, 4-wire connection: (NEMA type 14-30R) 120/240-volt Power Supply 30-amp, dryer powe
Resumo do conteúdo contido na página número 10
1= Remove center silver-colored terminal block screw. 5. Tighten strain relief screws. 2. Remove neutral ground wire from external ground conductor 6. Insert tab of terminal block cover into slot of dryer rear panel. Secure cover with hold-down screw. screw. Connect neutral ground wire and the neutral wire (white or center wire) of power supply cord under center, 7. You have completed your electrical connection. Now go to silver-colored terminal block screw. Tighten screw. "Venting Requirements.
Resumo do conteúdo contido na página número 11
1. Loosen or remove center silver-colored terminal block screw. 3. Connect ground wire (green or bare) of direct wire cable to external ground conductor screw. Tighten screw. 2. Connect neutral wire (white or center wire) of power supply cord to the center, silver-colored terminal screw of the terminal block. Tighten screw. A A. External ground conductor screw A. External ground conductor screw B. Neutral ground wire B. Neutral ground wire C. Ground wire (green or bare) of power supply cord C. C
Resumo do conteúdo contido na página número 12
When connecting to the terminal block, place the hooked end of the wire under the screw of the terminal block (hook facing right), Optional 3-wire connection squeeze hooked end together and tighten screw, as shown. Use for direct wire or power supply cord where local codes do not permit connecting cabinet-ground conductor to neutral wire. 1. Remove center silver-colored terminal block screw. 2. Remove neutral ground wire from external ground conductor screw. Connect neutral ground wire and the n
Resumo do conteúdo contido na página número 13
• Remove excess flexible metal vent to avoid sagging and kinking that may result in reduced airflow and poor performance. • Do not install flexible metal vent in enclosed walls, ceilings or floors. Elbows 45° elbows provide better airflow than 90° elbows. Fire Hazard Use a heavy metal vent. Do not use a plastic vent. Do not use a metal foil vent. Jl Failure to follow these instructions can result in death or fire. Good Better WARNING: To reduce the risk of fire, this dryer MUST BE Clamps EXHAUST
Resumo do conteúdo contido na página número 14
• Do not use an exhaust hood with a magnetic latch. Improper venting can cause moisture and lint to collect indoors, which may result in: [] Moisture damage to woodwork, furniture, paint, wallpaper, carpets, etc. [] Housecleaning problems and health problems. A A. Standard rear offset exhaust installation B. Rear exhaust installation to left or right side Choose your exhaust installation type Recommended exhaust installations Typical installations vent the dryer from the rear of the dryer. W Oth
Resumo do conteúdo contido na página número 15
Determine vent path • Select the route that will provide the straightest and most direct path outdoors. • Plan the installation to use the fewest number of elbows and turns. Excessive Weight Hazard Use two or more people to move and install dryer. • When using elbows or making turns, allow as much room as possible. Failure to do so can result in back or other injury. • Bend vent gradually to avoid kinking. • Use the fewest 90° turns possible. 1. To protect the floor, use a large, flat piece of c
Resumo do conteúdo contido na página número 16
5. Remove the 4 plastic plugs located outside the dryer door opening. Check the levelness of the dryer. Check levelness first I side to side, then front to back. I If the dryer is not level, prop up the dryer using a wood block. Use a wrench to adjust the legs up or down and check again for levelness. You can change your door swing from a right-side opening to a left-side opening, if desired. 6. Install 4 plastic plugs into screw holes in the dryer left when 1. Place a towel or soft cloth on top
Resumo do conteúdo contido na página número 17
3. Remove the 4 screws from the opposite side of the door. Hang door by placing screw heads into top slotted holes of hinges and slide door down. Align bottom screw holes in hinge and door. Install two bottom screws. Tighten all hinge screws. I 7. Close door to engage door strike. ©@' Sp el_{!} ,.-1 1. Check that all parts are now installed. If there is an extra part, Install the 2 hinges to the front panel of the dryer using go back through the steps to see which step was skipped. 4 screws. Use
Resumo do conteúdo contido na página número 18
DRYER USE STATUS MODIFIERS OPTIONS _mp Drum Light C®lDown ;gh v_/rin_l_ Guarg 0 L_w Wrinkle Guard 90 b _mal E×_ Low CheeklintScr_n_ [ovd So_ Dy¢le Signal Volume Dryness TernDe_ature Explosion Hazard Fire Hazard Keep flammable materials and vapors, such as No washer can completely remove oil. gasoline, away from dryer. Do not dry anything that has ever had any type of oil on Do not dry anything that has ever had anything it (including cooking oils). flammable on it (even after washing). Items con
Resumo do conteúdo contido na página número 19
Adjust Dryness Level. NOTE: Dryness Level selections can be made only while using Auto Dry Cycles. To stop or pause your dryer at any time Mof_ Open the door or press STOP once. Press STOP twice to cancel a cycle. Nomal L_SS To restart the dryer Close the door. Press START until dryer starts. NOTE: Drying will continue from where the cycle was interrupted Dryness Level if you close the door and press Start within 5 minutes. If the cycle is interrupted for more than 5 minutes, the dryer will shut
Resumo do conteúdo contido na página número 20
Follow the progress of your dryer with the drying Status indicator Select the drying cycle that matches the type of load you are lights. drying. See Auto or Timed Preset Cycle Settings charts. STATUS AUTO DRY CYCLES Damp Cotton / Towels Normal CoolDown \ / Heavy Clothes Dry Duty / Casuam WrinkleGuard Timed _i - Ultra Dry Delicate Express Dry Check Lint Scleen TIMED CYCLES Damp The Damp light illuminates in an Auto Dry Cycle when the laundry is approximately 80% dry or suitable for ironing. Damp
