Resumo do conteúdo contido na página número 1
® ®
®
Aussie
by Meco
®
Monaro Charcoal Grill
Assembly and Use Manual
M Mo od de ell 7 76 65 52 2K K1 1
M Mo od de ell 7 76 65 52 2K K5 5 & & 7 76 65 52 2K K6 6
FOR OUTDOOR HOUSEHOLD USE ONLY. NOT FOR COMMERCIAL USE.
For Customer Service, call 1-800-251-7558 or visit our web site at www.meco.net
• Failure to follow these instructions could result in fire or explosion which could cause property
damage, personal injury or death.
• Read and follow instructions carefully before assembly or use.
Resumo do conteúdo contido na página número 2
— NOTICE — MECO CORPORATION STRIVES TO BE A QUALITY SUPPLIER OF CONSUMER PRODUCTS. IF WE OMITTED ANY PARTS NEEDED FOR ASSEMBLY, OR YOU NEED TROUBLESHOOTING INFORMATION, PLEASE CONTACT US USING OUR TOLL FREE NUMBER. THANK YOU FOR PURCHASING A MECO CORPORATION PRODUCT. 1-(800)-251-7558 CONSUMER SERVICE DEPARTMENT 8 am - 6 pm E.S.T Mon. - Fri. MECO CORPORATION 1-(423)-639-1171 (TELEPHONE) 1500 INDUSTRIAL ROAD www.meco.net 1-(423)-639-2570 (FAX) GREENEVILLE, TN. 37745 USA CONTENTS I. Assembly Inst
Resumo do conteúdo contido na página número 3
PARTS ILLUSTRATIONS 3 2 or 2A 2B 1 3A 5 4 6 or 6A 4A 5A 6B 9 10-See Item 7 8 7 with Item 10 installed 11 11A 12 13 14 17 15 18 or 18A 17A 16 21 20 19 22 23 3
Resumo do conteúdo contido na página número 4
26 24 25 Hood w/Embossed Logo 25A Hood w/Decal Logo Shown QTY. PARTS LIST Model Model Model ITEM DESCRIPTION PART # 7652K1 7652K5 7652K6 1 Owner's Manual 03.6077.01 1 1 1 2 Side Table (Metal Insert) 03.6495.00 -- 2 2 2A Side Table (Metal Insert ) 03.6597.00 -- -- 2 2B Side Table (All Wood) 03.5845.00 2 -- -- 3 Fixed Leg (Metal) 03.6496.00 -- 2 2 3A Fixed Leg (Wood) 03.6066.00 2 -- -- 4 Wheel Leg (Metal) 03.6497.00 -- 2 2 4A Wheel Leg (Wood) 03.6065.00 2 -- -- 5 Bolt, 1/4-20 x 1 3/8" 03.64
Resumo do conteúdo contido na página número 5
TOOLS: and/or or STEP 1- Leg/Side Table Assembly (ITEM 3 or 3A) Fixed Leg (ITEM 2 or 2A (ITEM 2B) Side Table Side Table (ITEM 4 or 4A) Wheel Leg (ITEM 5A) 1/4-20 x 1” Bolt (ITEM 5) 1/4-20 x 1 3/8” Bolt · Lay Side Tables upside down on a flat surface. Side tables will fit on either side of grill. · Attach the two Fixed Legs to one Side Table. Align four recessed holes of a Fixed Leg with four inserted holes in a Side Table. The four large recessed holes in the Fixed Leg should face away from
Resumo do conteúdo contido na página número 6
STEP 2- Bottom Shelf/Leg Assembly (ITEM 5) (ITEM 5A) (ITEM 6B) (ITEM 6 or 6A) 1/4-20 x 1 3/8” Bolt 1/4-20 x 1” Bolt Bottom Shelf Bottom Shelf · Place both Leg/Side Table Assemblies opposite each other as shown with Bottom Shelf between them. · Align Bottom Shelf holes with holes of Wheel Legs and attach with four 1/4-20 Bolts (Item 5 or 5A). Do not tighten Bolts completely. · Secure Fixed Legs to Bottom Shelf with 1/4 -20 Bolts. Go ahead and tighten Wheel Leg bolts securely. (This will n
Resumo do conteúdo contido na página número 7
STEP 3-Wheel Assembly (ITEM 8) Washer (Axle) (ITEM 10) Axle Nut (ITEM 9) Wheel 7 with Item 10 installed · Remove Axle Nuts from Axle. Insert Axle through both sides of Wheel Legs. Place Axle Washers onto each end of Axle. · Position Wheel hub recess to the outside and slide a Wheel onto each end of Axle. · Attach Axle Nut onto each end of Axle. Tighten each side with wrench or pliers. Axle Washer Axle Nut Wheel hub recess this side 7
Resumo do conteúdo contido na página número 8
STEP 4-Slide Vent Assembly (ITEM 12) Slide Vent (ITEM 13) Bolt, 6mm (ITEM 15) (ITEM 14) Sleeve Washer, 6mm (ITEM 11 or 11A) Spacer, 6mm (ITEM 16) Body Assembly Locknut, 6mm · Open the Hood on the Grill Body. · Align slotted holes in Slide Vent with holes in Grill Body Side. · Insert a 6 mm x 16 Bolt through the 6mm Steel Washer and Sleeve Spacer. Position this assembly with the Sleeve Spacer inside the Slide Vent slotted hole. Attach 6mm Steel Washer and Locknut to Bolt from inside of Grill B
Resumo do conteúdo contido na página número 9
STEP 5-Hood Handle Assembly (ITEM 14) Washer (ITEM 17) Bolt, 6mm x 90 mm 6 mm (ITEM 16) Locknut (ITEM 19) Handle Spacer 6mm (ITEM 18 or 18A) Hood Handle · Open Hood and lay it on on its backside. · Insert 6 mm x 90 mm Bolt through recessed hole of Hood Handle, through Handle Spacer through a hole in Hood. (Note: Wide end of Handle Spacer goes against the Hood.) · Attach a 6mm Washer and Locknut to the Bolt from inside Hood. Do not over tighten; it may crack the Hood finish. · Repeat for ot
Resumo do conteúdo contido na página número 10
STEP 6-Continued Grill Body/Cart Assembly (See also page 11 for Wood Cart Assembly) · Carefully lay Grill Body Assembly on its back side with Front panel facing up and Hood open. Lay Cart Assembly on the back side with the Grill Body between Side Tables. (Note: Wheels on Cart assembly are to the left.) (FIG. A) · Align slotted holes on sides of Grill Body Assembly with holes in edges of legs (FIG. B). Insert Body Spacers between Leg and Grill Body. (You can pull the legs away from the body s
Resumo do conteúdo contido na página número 11
STEP 6-Grill Body/Wood Cart Assembly Wingnut Body Spacer View from inside Bolt Body/Leg Assembly FIG. B View from back side of Body/Leg Assembly after standing up FIG. A 11
Resumo do conteúdo contido na página número 12
STEP 7- Install Drip Pan, Charcoal Grate & Cooking Grid (ITEM 22) Drip Pan (ITEM 23) Charcoal Grate (ITEM 24) Cooking Grid · Slide Drip Pan back into Grill Body. Make sure the Drip Pan is pushed all the way in. · Hang Charcoal Grate inside Grill Body by hooking the handles inside the two (2) elongated slots on each side of the Grill Body. · Lay the Cooking Grids on the front and rear Body shoulders above the Charcoal Holder. Slide Drip Pan under Body Hook Handles into slots Install Grids on Fr
Resumo do conteúdo contido na página número 13
OPERATING AND MAINTAINING YOUR CHARCOAL GRILL · Once the barbecue grill has been lit, do not touch the BEFORE USING YOUR CHARCOAL GRILL charcoal briquettes/wood chunks to see if they are hot. · Never add lighter fluid to already hot or warm coals. USING CHARCOAL · Do not close Hood on flaming charcoal. If closed and re-opened, the flames could leap out and burn. · Do not wear loose clothing (example: hanging shirt To reduce the risk of serious bodily injury or death: tails, clothing with f
Resumo do conteúdo contido na página número 14
STEP 1. Open the Hood and the Slide Vents. FOR GRILLING STEP 2. Remove the Cooking grids. Make sure the Drip Pan is pushed all the way in. STEP 3. Place about five pounds of charcoal (72- 75 briquettes) on the Charcoal Grate. Make a pyramid shaped stack near the front of the Charcoal Grate. (See Illustration Starting A Fire.) STEP 4a. For regular charcoal or wood, apply the lighter fluid, following the container instructions. Let the lighter fluid soak in for approximately one minute.You may use
Resumo do conteúdo contido na página número 15
3) Cooking Grids-Clean the residue off with a baking soda END OF COOKING SESSION and water solution. Use a non-abrasive scouring powder. for stubborn stains. Some char may remain; ok to leave it. 4) Grill Body-Remove excess grease and/or fat with a soft To reduce the risk of serious injury from burns or fire: plastic or wooden scraper. Do not use steel wool or other · Wait until hot ashes or charcoal is completely abrasive cleansers that can scratch the porcelain coated extinguished before
Resumo do conteúdo contido na página número 16
® ® Aussie P/N 03.6077.01 REV. C 12/06 16
