Resumo do conteúdo contido na página número 1
PRO-DJ1
Front load professional single CD player
Featuring:
Fader “Q” Start,
Flip Flop and Digital Output
PRO-DJ1
+10
© American DJ® AUDIO Los Angeles, CA 90058 USA
Resumo do conteúdo contido na página número 2
NOTE: IMPORTANT SAFETY ITEMS FOR This CD player uses a semiconductor laser. U.S.A. & CANADA MODEL ONLY It is recommended for use in a room at the WARNING: following temperature: 41˚F - 95˚F / 5˚C - 35˚C TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS CD PLAYER TO CAUTION WATER OR MOISTURE. TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, CAUTION: RECEPTACLE OR OTHER OUTLET UNLESS THE 1. Handle the power supply cord carefully. Do not BLADES CAN BE CARE
Resumo do conteúdo contido na página número 3
SAFETY INSTRUCTIONS I. Read Instructions - All the safety and operating 10. Power-Cord Protection - Power-supply cords instructions should be read before the appliance should be routed so that they are not likely is operated. to be walked on or pinched by items placed upon or against them, paying particular 2. Save Instructions - The safety and operating attention to cords at plugs, convenience instructions should be saved for future receptacles, and the point where they exit referenc
Resumo do conteúdo contido na página número 4
FUNCTIONS AND CONTROLS PRO DJ 1 Control Layout 18 17 TIME 16 PITCH SGN CTN 15 PITCH BEND 14 OP CL 1 13 LOOP RELOOP 2 IN OUT 12 TRACK +10 3 REV FWD 0 0 JOG 0 0 0 0 PITCH BEND 11 4 SHUTTLE PITCH DISC OPEN 20 21 22 23 19 5 6 7 8 9 10 26 27 28 29 30 31 25 24 Figure 1 37 36 35 34 33 32 1. OPEN/CLOSE - (Disc Tray Open/Close)- Press to load or eject the disc. Each press will open or close the disc tray on the transport. NOTE: Tray will not open unless the disc has been paused. 2. OUT BUTTON - Used to
Resumo do conteúdo contido na página número 5
FUNCTIONS AND CONTROLS CONT. which play was started. Steady lighting of this LED indicates the ready condition. The CUE button can be held down to play a CD. When you release the CUE BUTTON it instantly returns to the CUE POINT. 8. TRACK BUTTON - This button is used to select a Forward Skip track to be played. 9. PLAY/PAUSE BUTTON - Each press of the PLAY/PAUSE BUTTON causes the operation to change from play to pause or from pause to play. 10. +10 BUTTON - This button is used to access trac
Resumo do conteúdo contido na página número 6
PREPARATIONS 1. Checking the Contents CAUTION: Check that the carton contains the following items: • Be sure to use the supplied control cables. Using other 1) Main unit. types of cable may result in unit damage. 2) Operating instructions (this booklet). • Be sure the power is off when connecting the control 3) A pair of RCA cables. cables, otherwise the units may not work properly. 4) IEC power cord 2. Installing the Units Mount the unit onto your console or place it on a flat sur
Resumo do conteúdo contido na página número 7
(a) SLEEP MODE PROTECTION: After 15 minutes in PAUSE or CUE Mode the CD drive mechanism will automatically go in to sleep mode. This function shuts down the laser pick-up diode extending the life of the unit. During sleep mode the LCD screen will flash repeatedly indicating sleep mode is activated - This is not a malfunction, to restart the drive simply press the Cue or Play/Pause Buttons (b) 60 SECOND TRANSPORT PROTECTION: Will automatically close transport if left open for more than 60 seco
Resumo do conteúdo contido na página número 8
BASIC OPERATIONS CONT. • CUE POINT SETTING: A. Playback starts from pause or skip to a new track during play or pause. The beginning play point will be set to the cue point. B. Or, Press the IN BUTTON (5a) button during playback to set the new cue point. 8. AUTO CUE When disk is loaded, the cue point is set to the first source of music. If track is changed before pressing play, the CUE POINT is changed to the new starting point. If you pause during playback this also sets the new CUE POI
Resumo do conteúdo contido na página número 9
BASIC OPERATIONS (CONT.) 14. PITCH BENDING • The speed increases or decreases respectively when the (+) PITCH BEND BUTTON (14) or PITCH BEND (-) BUTTON (14) is pressed. The extent to which the speed changes is proportionate to the amount of time the button is pressed. For example, if the PITCH BEND (+) BUTTON (14) is held in continuously, the speed increases continuously. • The pitch can be changed from range. See changing PITCH PERCENTAGE (17). • The jog wheel will temporarily bend the p
Resumo do conteúdo contido na página número 10
SPECIFICATIONS GENERAL: Type: Twin mechanism compact disc player with wired controller. Disc type: Standard compact discs (5 in / 12cm and 3in/8cm discs) Dimensions: Player unit: 19"(W) x 3 15/32” (H) x 9 55/64” (D) Installation: Table-top mount Weight: 6 lbs. / 2.4 kgs Power supply: 110~120v/220~240v AC, 50/60Hz Power consumption: 25W Environmental conditions: Operational temperature: 5 to 35˚C (41 to 95˚F) Operational humidity: 25 to 85% (no condensation) Storag