Resumo do conteúdo contido na página número 1
ENGLISH ESPAÑOL
website http://www.lgservice.com
LG
LG
Window-Type Air Conditioner
OWNER'S MANUAL
MODELS, MODELOS:
WL Series: LW1004ER
LW1204ER
LW1404ER
IMPORTANT
Please read through this manual. It contains valuable
WP Series: LW1804ER
information about your air conditioner. This manual may
help save time and money by explaining proper air
conditioner maintenance and preventing improper use.
PRECAUTIONS
Pay close attention to precautions in order to prevent
potential hazards and damage from mis
Resumo do conteúdo contido na página número 2
Window-Type Air Conditioner Owner’s Manual TABLE OF CONTENTS FOR YOUR RECORDS Write the model and serial numbers here: Model # Serial # You can find them on a label on the side of each unit. Dealer's Name 1. Safety Precautions Date Purchased ■ Staple your receipt to this page in the event you need it to prove date of purchase or for warranty issues. 2. Operating Instructions 3. Care and Maintenance READ THIS MANUAL Inside you will find many helpful hints on how to use 4. Hardware Installation a
Resumo do conteúdo contido na página número 3
ENGLISH Safety Precautions Precautions To prevent injury to the user or other people and property damage, the following instructions must be followed. ■ Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified by the following indications. This symbol indicates the possibility of death or serious injury. WARNING This symbol indicates the possibility of injury or damage to properties only. CAUTION ■ Meanings of symbols used in this manual are as sho
Resumo do conteúdo contido na página número 4
■ Operation Plug in the power plug Do not operate or stop the Do not damage or use an properly. unit by inserting or pulling unspecified power cord. out the power plug. • Otherwise, it will cause • It will cause electric shock or • It will cause electric shock or electric shock or fire due to fire due to heat generation. fire. heat generation or electric shock. ON Do not modify power cord Do not share the outlet with Always plug into a length. other appliances. grounded outlet. • It will cause e
Resumo do conteúdo contido na página número 5
ENGLISH Do not allow water to run Leave the door closed while Ventilate before operating into electric parts. the air conditioner is air conditioner when gas running. goes out. • It will cause failure of machine • It is not designed to cool the • It may cause explosion, fire, or electric shock. entire house. and burn. CAUTION ■ Installation Never touch the metal parts Do not block the inlet or Ensure that the outer case of the unit when removing outlet. is not damaged by age or the filter. wear
Resumo do conteúdo contido na página número 6
Do not place heavy object If water enters the product, Do not clean the air on the power cord and take turn off the the power switch conditioner with water. care so that the cord should of the main body of appliance. not be pressed. Contact service center after taking the power-plug out from the socket. • There is danger of fire or • Water may enter the unit and electric shock. degrade the insulation. It may cause an electric shock. Turn off the power and Do not put a pet or house Do not use thi
Resumo do conteúdo contido na página número 7
ENGLISH Safety Prior to Operation Precautions Preparing for operation 1 Contact an installation specialist for installation. 2 Plug in the power plug properly. 3 Do not share the same outlet with other appliances 4 Do not use an extension cord. 5 Do not start/stop operation by plugging/unplugging the power cord. 6 If cord/plug is damaged, replace only with an authorized part. Usage 1 Being exposed to direct airflow for an extended period of time could be hazardous to your health. Do not expose o
Resumo do conteúdo contido na página número 8
Operating Remote Control Operations Instructions The remote control and control panel will look like those represented in the following pictures. 6 COOL FAN DRY FAN ENERGY SAVER AIR INDOOR DESIRED PURIFIER CLEAN FILTER FAN TIMER MODE TEMP POWER SPEED 5 4 3 2 1 Power 1 Temp 2 Fan Speed 4 Timer Mode 5 3 8
Resumo do conteúdo contido na página número 9
ENGLISH Remote Contr Remote Control Operations ol Operations 1 4 POWER FAN SPEED SELECTOR Operation starts when this button is pressed and For increased power while cooling, select a higher stops when you press the button again. fan speed. 3 steps: High ➔ Low➔ Med 2 TEMPERATURE CONTROL The thermostat monitors room temperature to 5 ON/OFF TIMER maintain the desired temperature. The timer can be set to start and stop the unit in The thermostat can be set between 60°F~86°F hourly increments (up to
Resumo do conteúdo contido na página número 10
Operating Adjusting the Air Flow Direction Instructions Vent Control For maximum cooling efficiency, CLOSE the vent. This will allow internal air circulation. OPEN the vent to discharge stale air. Part A CLOSE VENT OPEN NOTICE : Before using the ventilation feature, position the vent lever by pulling Part A out straight and snapping it into place. Adjusting the Air Flow Direction Airflow can be adjusted by changing the direction of the air conditioner's louvers. This can also increase the cooli
Resumo do conteúdo contido na página número 11
ENGLISH Care and Care and Maintenance Maintenance Turn the power off and unplug the power plug before cleaning the air conditioner. Air Filter The air filter behind the inlet grille should be checked and cleaned at least once every 2 weeks (or as necessary) to maintain optimal performance of the air conditioner. How to remove the air filter 1 The grille may be opened from the top for easy maintenance after installation. 2 Open the inlet grille by pulling off the exposed door on the top of the u
Resumo do conteúdo contido na página número 12
How to Attach Drain Pan (Optional) The air conditioner employs a proper drain method whereby the condensed water (moisture removed from the air) is drained to the outside. In very humid weather, (and for reverse cycle models in the reverse mode) excessive condensate water removed from the air may cause some water to collect. To remove this excess water you can install the drain pan as detailed below. 1 Take the drain pan which is located in the air CABINET discharge. 2 Remove the hole rubber fro
Resumo do conteúdo contido na página número 13
ENGLISH Hardware Hardware Installation Installation Product Features CAUTION: This appliance should be installed in accordance with national wiring regulations. The following information serves acts as a guide to help to explain product features. 13 6 7 11 5 8 14 9 1 12 2 4 15 10 3 1. CABINET 8. HORIZONTAL AIR DEFLECTOR (VERTICAL LOUVER) 2. FRONT GRILLE 9. CONTROL PANEL 3. AIR FILTER 10. POWER CORD 4. AIR INTAKE (INLET GRILLE) 11. COMPRESSOR 5. AIR DISCHARGE 12. BASE PAN 6. VERTICAL AIR DEFLECTO
Resumo do conteúdo contido na página número 14
WK Series How to Install the Unit 1 To prevent vibration and noise, make sure the unit Fence is installed securely and firmly. Awning 2 Install the unit where the sunlight does not shine Cooled air directly on the unit. Heat radiation 3 The outside of the cabinet must extend outward for at least 12" and there should be no obstacles, such as a fence or wall, within 20" from the back of the 1 cabinet because it will prevent heat radiation of the About /2" condenser. Over 20" Restriction of outsid
Resumo do conteúdo contido na página número 15
ENGLISH WL Series How to Install the Unit 1 To prevent vibration and noise, make sure the unit Fence is installed securely and firmly Awning 2 Install the unit where the sunlight does not shine Cooled air directly on the unit. Heat radiation 3 The outside of the cabinet must extend outward for at least 12" and there should be no obstacles, such as a fence or wall, within 20" from the back of the 1 cabinet because it will prevent heat radiation of the About /2" condenser. Over 20" Restriction of
Resumo do conteúdo contido na página número 16
WP Series How to Install the Unit 1 To prevent vibration and noise, make sure the unit Fence is installed securely and firmly. Awning 2 Install the unit where the sunlight does not shine Cooled air Heat directly on the unit. radiation 3 There should be no obstacles, such as a fence and wall, within 20" from the back of the cabinet because it will prevent heat radiation of the 1 About /2" condenser. Restriction of outside air will greatly reduce the Over 20" cooling efficiency of the air conditio
Resumo do conteúdo contido na página número 17
ENGLISH WK, WL Series Installation Kits Contents NO. NAME OF PARTS Q'TY 2 3 4 1 1 FRAME CURTAIN 2 2 SILL SUPPORT 2 3 BOLT 2 4 NUT 2 5 6 7 8 13 5 SCREW (TYPE A) 16 6 SCREW (TYPE B) 3 7 SCREW (TYPE C) 5 10 8 FOAM-STRIP 1 12 9 DRAIN PIPE 1 9 11 10 FOAM-PE 1 11 FRAME GUIDE 2 12 WINDOW LOCKING BRACKET 1 13 FOAM-PE 1 Suggested Tool Requirements SCREWDRIVER(Philips and Flatead), RULER, KNIFE, HAMMER, PENCIL, LEVEL Shipping PREPARATION OF CHASSIS Screws 1 Remove the screws which fasten the cabinet at
Resumo do conteúdo contido na página número 18
Cabinet Installation 1 Open the window. Mark a line on center of the window stool. Carefully place the cabinet on the window stool and align the center mark on the bottom front with the center line marked in the window stool. Upper Guide Window stool Front Angle Fig. 1 2 Pull the bottom window sash down behind the Upper Guide until it meets. Window Sash Upper guide NOTICE : Do not pull the window sash down tightly that the movement of Frame Curtain is restricted. 13 Foam-pe Cabinet 1 Frame Cur
Resumo do conteúdo contido na página número 19
ENGLISH 6 The cabinet should be installed with a very slight tilt 6 Screw(Type B) (about 1/2") downward toward the outside (See Fig. 5). Adjust the bolt and the nut of Sill Support for balancing the cabinet. 2 Sill Support 7 Attach the cabinet to the window stool by driving the screws (Type B: Length 16mm (5/8 inch) Sash track and below.) through the front angle into window stool. 8 Pull each Frame Curtain fully to each window sash track, and repeat step 2. Front Angle 6 Screw(Type B) 2 Sill Su
Resumo do conteúdo contido na página número 20
12 Attach the Window Locking Bracket with a Type Window locking C screw . (See Fig. 9) bracket 12 Fig. 9 13 Attach the front grille to the cabinet by inserting the tabs on the grille into the tabs on the front of the cabinet. Push the grille in until it snaps into place. (See Fig. 10) Fig. 10 14 Pull down the inlet grille and secure it with a Type A screw through the front grille. (See Fig. 11) 15 Window installation of room air conditioner is now completed. See ELECTRICAL DATA for attaching po
